The Proaim Gold Pan Tilt Head 12V Joystick Control BoxIs a motorized pan/tilt remote head for jibs and cranes. It can safely handle camera packages weighing up to 16.5 pounds, is capable of panning throughout 360°, and depending on camera configuration, it can also move 360° through the tilt axis.

The head has variable pan and tilt speeds, with a minimum speed of 6° per second for slow and languid pans and tilts. When more alacrity is necessary, the head has a maximum pan/tilt speed of 51° per second. Included with the head are the joystick controller, a short 4-pin XLR power cable for working from batteries, a 12V power supply, and a worldwide AC power converter. The included control cable is 49' long, allowing you to work on a wide variety of jibs and cranes.

16.5-Pound Load Capacity    360° Pan, 360° Tilt    6°/sec Minimum Spreed    51°/sec Maximum Speed

Related Questions and Answers

Q: 1. Does it come with a pan and tilt head? If not, how does it mount to the crane, so I can find one that will work.

A: It does not come with a pan/tilt head. it mounts a motorized head via a cheese plate using 1/4 20 or 3/8 16 screws. here are a couple of options for you to consider Proaim Senior 2-Axis Pan/Tilt Head with 12V Joystick Control B&H # PRPTSR MFR # PT-SR Proaim Jr Pan/Tilt Head with Joystick Control (12 VDC) B&H # PRPTJR MFR # PT-JR

Q: 2. Can this head be mounted on a tripod?

A: Yes and there are several recommended models listed in the accessories portion of our product page.

Q: 3. Would the Proaim 24' Breeze Kit work with DJI RS3 pro gimbal? If yes, what adapter does it need?

A: The Proaim 24' Breeze Kit with Jib/Crane will work with the DJI RS3 Gimbal. Please add the following parts. Proaim Jib/Crane Gimbal Mount Kit for DJI Ronin, Ronin-M, and Ronin-MX BH #PRRN24400 Proaim Quick Release Plate for Handheld Gimbals BH #PRPQRG

Q: 4. This is listed as a top seller but I see no reviews. Could you reach out to previous buyers and ask them to give feedback? Would love to know what actual users think.

A: This Q&A section does ask users to respond. Unfortunately, they have not for this item at this time. We will say that users are satisfied owing to the number we are selling. Look online for videos and to the PROAIM website for even more information.

Q: 5. Any idea how to control Zoom and Focus using this head?

A: As far as we are aware, the controls on the Proaim Jr Pan/Tilt Head are for the pan and tilt head exclusively, and do not interface with the camera or control it. I believe the easiest way to control your camera's zoom/focus while it is on a crane or jib would be a wireless follow focus system.

Q: 6. Does this work with the Proaim Alphabet 21' Jib/Crane Arm?

A: Yes, The Proaim Jr Pan/Tilt Head with Joystick Control (12 VDC) would be compatible with the ProAim Alphabet Jib models.

Q: 7. What exactly do the damping controls do? Do they control the "ramp up" and "ramp down" speeds on the motors?

A: The damping control of the Proaim Jr Pan/Tilt Head with Joystick Control prevents the Head from stopping with a jerk enabling you to achieve smooth endings.

Q: 8. Can this pan 360 degrees continuously or once it makes a full revolution does it need to rotate back. It appears the cables run through the center of the frame. Is there enough room in that opening to fit a small zoom control cable?

A: Yes. It can be mounted vertically or underslung. The Head will pan and tilt through 360°, and this enables the camera to point directly upwards or downwards when required.

Q: 9. is the joystick proportional speed or is it strictly directional?

A: The Proaim Jr Pan/Tilt Head with Joystick Control's (12 VDC) joystick does not have reactive speed support, instead, the tilt and pan speeds are adjusted by via the knobs on the controller.

Q: 10. Do I need to buy a power block or a power system?

A: This kit includes an AC Power Supply and the Power Pack Battery. You could purchase an additional Power Pack, however it comes with one already. https://bhpho.to/38P42Gq