Proaim Airwave Vibration Isolator Arm 11-33 Lb

Product Code: eq67000
Availability: In Stock

$2,256.00 $3,564.48

Qty

20 reviews Write a review

Description
Reviews (20)

The Proaim Airwave Vibration Isolator Arm 11-33 lbsupports gimbal rigs from 11 to 33 pounds, reducing vibration from moving platforms to help provide smooth shots taken over challenging conditions. The system features micro-adjustable springs and dampers, allowing you to adjust for the weight of your rig, the speed of your vehicle, and the terrain conditions. It comes with a mounting plate designed for the DJI Ronin, Ronin M, and Ronin MX, but it can also be used with other gimbals. The arm mounts onto a standard speed rail with diameters from 1.5 to 2". An optional heavy-duty spring set is available to increase the payload supported from 33 to 66 pounds. An included flight case allows you to pack your arm and take it with you.

Absorbs and Dampens Vibration Micro-Adjustable Springs and Dampers For Ronin, Ronin M, and Ronin MX Mounts on Standard Diameter Speed Rail Optional Heavy-Duty Spring Set Included Flight Case

Parameters
Material of Construction	Arm and Ronin Mounting Plate: Commercial-Grade Aluminum
Load Capacity	11 to 33 lb / 5 to 15 kg
Lift Range	22" / 56 cm
Mounting Compatibility	Arm Speed Rail: 1.5 to 2" / 38 to 50 mm Ronin Mounting Plate Mounting Holes: 1/4"-20, 3/8"-16
Dimensions	Arm: 27 x 6 x 2.8" / 68.6 x 15.2 x 7.1 cm Flight Case: 31.5 x 16.5 x 11.8" / 80 x 42 x 30 cm
Weight	Arm: 18.0 lb / 8.2 kg Ronin Mounting Plate: 5.1 oz / 145.2 g Flight Case: 25.6 lb / 11.6 kg
Packaging Info
Package Weight	55.5 lb
Box Dimensions (LxWxH)	35.75 x 18.5 x 13.13"

Related Questions and Answers

Q: 1. How much does the unit weigh?

A: The weight of the DigitalFoto Solution Limited HULK-ISOPRO Shock Vibration Isolator, is 0.2kg .

Q: 2. Can you remove the suction cup on the bottom?

A: This product works through the suction cup that has a hold rating of 175lbs. This product could not be used without the suction cup.

Q: 3. The load capacity is 132 lbs. and the Sony camera mounted to it weighs under 2 lbs. Is that correct?

A: The DigitalFoto Solution Limited Vibration Isolator Dampening Head for Camera Gimbal is made of Aluminum alloy. The weight is 1.8lbs, and the weight support is 132lbs.

Q: 4. What is the Payload on this one?!

A: According to Kessler Crane this product does not have a specific load capacity, however the Mini Model is geared towards Mirrorless and DSLR cameras. If you have a larger camera, you will need to move up to one of their larger models.

Q: 5. Can the 3/8 screw on top be removed?

A: The 3/8 top screw on the DigitalFoto Solution Limited Vibration Isolator Dampening Head for Camera Gimbal is not removable.

Q: 6. In the video you can see a part in between the isolator and the power base of the gimbal. What would that be the bridge between the two?

A: There are several manufacturers that make the DJI RS2 (Power) Base Plate.

Q: 7. Is this designed to be used with suction cup on bottom? Can it be used with the suction cup on top and gimbal hanging below?

A: Here is a response directly from Kessler about your inquiry: While it would be possible to rig the KillShock Mini upside down the results are not likely going to be what the customer is expected as the Shock Modules would no longer be compressing and isolating the camera from vibrations as the weight of the camera rig would be pulling the shock modules. If the customer is looking for an underslung type of set-up with a vibration isolator a better solution would be the KillShock (MG1048) and the KillShock Inversion Mounting Kit (MG1068). KillShock (MG1048): https://www.bhphotovideo.com/c/product/1430583-REG/kessler_crane_mg1048_killshock_isolator_system.html KillShock Inversion Mounting Kit (MG1068): https://www.bhphotovideo.com/c/product/1430592-REG/kessler_crane_mg1068_killshock_inversion_mounting_kit.html

Q: 8. Would this set up work for a lighter set up? Say a Ronin S and blackmagic?

A: The setup is customizable and can be adjusted for any size and weight camera by changing the cables for different lengths or diameter. They are common cables and easy to find.

Q: 9. Is the tension adjustable?

A: The tension on the DigitalFoto Solution Limited Vibration Isolator Dampening Head for Camera Gimbal can be adjusted by removing or adding the cables.

Q: 10. What is the weight of the plates and cables separately?

A: The Cloud Mount Vibration Isolator Cable Clamp will weigh .2lbs, the RigPlate will weigh 1.60lbs, and the Cable – 1/4″ x 7″ will weigh about .21lbs.

Kent	14/09/2024
[22" / 56 cm] We just used it on our latest music video with a Canon C300 mark Ii rigged on it, and it handled perfectly. It's super flexible with the range, so if you are in a small room, it still works. The shots are so smooth because of it. 5

Kent	14/09/2024
[22" / 56 cm] We just used it on our latest music video with a Canon C300 mark Ii rigged on it, and it handled perfectly. It's super flexible with the range, so if you are in a small room, it still works. The shots are so smooth because of it. 5

Carlos	23/08/2024
[22" / 56 cm] I am a Videographer in Santa Clarita California. It took me 3 years of searching for the perfect Jib, my initial choice was Varizoom but they got so ultra expensive that I started looking into Proaim 10' wave 2, tripod kit with pan and tilt head, I got to say I made the right choice, this jib is perfect for me, because I can shorten or extend the arm length with out extra pieces. The build quality is great, very robust jib, no wobble whatsoever, I am buying a 6 inch mitchell extension at the tripod base, I think the tripod is a little shorter than I like, and I don't feel confident extending it higher, I think Proaim makes a tripod that can actually expand with no problem. I highly recommend this product. Blessings to you all. 5

Jinpyo	04/08/2024
[55.5 lb] It showed the best performance in the projects we worked on. 5

Lefty	03/08/2024
[55.5 lb] The DTI box has the RCA inputs I needed for running a unbalanced subwoofer out RCA jack to the balanced XLR input jack on my Crown CE 1000 subwoofer amp. The Ebtech HE-2-XLR does not have RCA inputs. The hum is gone in my home theater room. 5

Lefty	03/08/2024
[55.5 lb] The DTI box has the RCA inputs I needed for running a unbalanced subwoofer out RCA jack to the balanced XLR input jack on my Crown CE 1000 subwoofer amp. The Ebtech HE-2-XLR does not have RCA inputs. The hum is gone in my home theater room. 5

Johnny P	25/07/2024
[55.5 lb] I use this arm with my Delvcam 10 monitor. It holds up no problems whether its battery powered or plugged in. I also have connected it to a gopro and a back up camera mounted to my tripod. Very versatile....It holds my 160 LED light as well, and allows me to configure it the way I want. 5

Johnny P	25/07/2024
[55.5 lb] I use this arm with my Delvcam 10 monitor. It holds up no problems whether its battery powered or plugged in. I also have connected it to a gopro and a back up camera mounted to my tripod. Very versatile....It holds my 160 LED light as well, and allows me to configure it the way I want. 5

Andres Mario	14/07/2024
[22" / 56 cm] It is amazing well built. It is a professional tool for almost any camera. really recommend it. 5

Cynthia	05/05/2024
[55.5 lb] I have this Wave 2 Jib Arm with Tripod, Dolly, Track, and both Track Wheels and the very large Caster Wheels and must say that this is an outstandingly great system. No regrets and no criticisms. Yes the mounting base requires a 100mm heavy duty tripod and suggest the Proaim one included in the package, (actually I have two of those tripods, and a Proaim Orion Geared Head and Tilting Base Plate) and am totally impressed with all of these products. Their equipment is beautifully designed and built. I'm looking forward to getting some of their car mounts and more in the future. Great investments. 5