Portable Camera Dolly With Tracks

Portable Camera Dolly With Tracks - E-image

Product Code: eq67041
Availability: In Stock

$2,099.97 $2,897.96

Qty

6 reviews Write a review

Description
Reviews (6)

Featuring all necessary components in a compartmentalized carry case, the Portable Camera Dolly with Tracks - E-Imageis ready to go out of the box for use with virtually all professional tripods. It supports up to 110 lb, and the track can be set up at lengths from 3.3 to 16.4'. High-density foam pads go underneath the aluminum rails to allow for safe and smooth operation. Thanks to these pads, the rails can be set up even on surfaces that are slightly uneven. The dolly wheels are designed to roll smoothly along the rails. At the same time, the rails have a film coating that makes them more wear-resistant for long-lasting performance. The system can be set up nearly anywhere, and it breaks down easily and packs away in the case for convenient transport and storage.

Collapsible System in a Custom Case 3.3 to 16.4' Track Length 110 lb Weight Capacity Supports Most Professional Tripods High-Density Foam Pads

Parameters
Load Capacity	110 lb / 50 kg
Material	Aluminum Rails, Foam Pads
Slide Length	Total: 16.4' / 5 m Each Track: Approx. 39"
Track Width	31.5" / 80 cm
Operating Temperature	-4 to 104°F / -20 to 40°C
Case Dimensions	Approx. 41 x 13 x 6.5" / 104 x 33 x 16.5 cm
Weight	28.6 lb / 13 kg
Packaging Info
Package Weight	27.8 lb
Box Dimensions (LxWxH)	41 x 14 x 8"

Lightweight, collapsible system in a compartmentalized carry case
Compatible with most professional tripods
Supports up to 110 lb loads
3.3 to 16.4' track length
High-density foam pads allow setting up on slightly uneven ground and provide for safe operation

Related Questions and Answers

Q: 1. Can I use this dolly with sachtler's flowtech tripod?

A: Yes, but rubber feet must be removed first.

Q: 2. I have a Celestron AVX tripod so I wonder if this work with it?

A: Yes, this is a universal dolly, which has the option to hold spiked foot tripods, as well as single-point feet, which is what the Celestron has... Although, we would recommend using the following suppression pads on the feet for extra protection against unwanted vibrations - https://bhpho.to/3kBxiUs

Q: 3. Can you buy extra tracks for this dolly?

A: At this time, the tracks are only sold with the dolly in the kit as per the manufacturer. http://www.eimagevideo.com/En/pro_detail/tid/10/id/85

Q: 4. will this work well with a manfrotto 755XB tripod?

A: Yes, the E-image EI-7004C has adjustable locks for rounded tripod legs and should be able to support the Manfrotto 755XB and similar tripods.

Q: 5. Is it possible to purchase more tracks to add on to this kit?

A: no unfortunately E*image doe not sell additional track for this system

Q: 6. Will this dolly work with the Manfrotto 161MK2B tripod? Does the lock stop the wheels from rotating as well as turning?

A: The E-Image Universal Middleweight Tripod Dolly with Locking Wheels should work fine on the Manfrotto161MK2B tripod, by clamping onto the tripod's feet.

Q: 7. Can I use a Sachtler Flowtech 75 on this dolly?

A: Yes, you can use the Sachtler Flowtech 75 with the E-Image Portable Camera Dolly with Tracks.

Q: 8. Can the working radius be shrunken to less than 18.5"?

A: No. The 18.5" radius is the smallest possible available.

Q: 9. Anyone know how much it weighs? I see the package weight is over 10lbs, which seems kinda high.

A: The E-Image Universal Middleweight Tripod Dolly with Locking Wheels weight is 7lbs,

Q: 10. how far out does the working radius extend?

A: It has a diameter of 35 inches.

Thad	27/08/2024
[27.8 lb] This dolly is nearly perfect for my needs. The wheels are butter smooth, even working fairly well on grass. It accommodates two types of tripod feet. The legs lock in place via the hand-tightened screw. I bought this dolly to move a fairly heavy jib rig (about 75 lbs). It handles it no problem. I moved the heavy rig over gravel yesterday and tipped the whole thing over not once, but twice. This was not the dolly's fault. The dolly held up fine. I thought it might get bent or twisted from the falls, but there was no such damage. The only improvement I can recommend is to replace the hand-tightened screw (for locking/collapsing the legs) with a spring-loaded pin. That would be much faster and equally effective. That's a pretty minor critique though. 5

J.	17/08/2024
[28.6 lb / 13 kg] The build quality is good on this dolly. Very sturdy and quiet. The castors are excellent 3in wheels with good step on step off brakes. Also adds about 6in of height to tripod setup so you get over 6 feet with the GA752 3 stage tripod! 5

John	22/07/2024
[28.6 lb / 13 kg] Glad I found this product for under $60 I was amazing how well make it is . This industrial strength dolly allows me to convert my Magnus REX 5000H tripod into to a full camera dolly in seconds ! .The industrial designed wheels offer solid foot lever locking and the wheels glide smoothly for flawless tracking shots. The dolly sets up and folds down in seconds . Its become my favorite combo product for on location shoots I take with me everywhere I go . 5

Mark	13/06/2024
[41 x 14 x 8"] I really wanted to get a portable dolly system that was easy to set up and the E-Image delivers. My first time was ready to go in about 10 minutes and using it was a breeze, and super smooth. Attaching my Manfrotto tripod was simple. 5

Thomas C	05/06/2024
[31.5" / 80 cm] a must for those whom need to shift camera positions quickly. a workhorse for my Benro video tripod. 5

David	30/11/-0001
[31.5" / 80 cm] bought it in combination with E-Image EG05A2 Two-Stage Aluminum Tripod, those two are going to work very nice on the floor 5