The 2x8 4K UHD HDMI Splitter Scaler - A-Neuvideofrom 2x8 4K UHD HDMI Splitter Scaler - A-Neuvideois a switching splitter designed to provide HDR, HDR10, Dolby Vision, and other HDMI 2.0 audio and video support applications. The unit features a Group Mode, which enables it to function as two independent 1 x 4 splitters. The splitter features 4K UHD HDMI video sources, of up to 4K @ 60 Hz (4:4:4, 8-bit), and can operate with 10-bit or 12-bit HDR sources. LPCM 7.1, Bitstream, and HD Bitstream audio pass-through is available with up to 192 kHz of audio sampling rates.

Each output features an independent HDCP management engine and can be configured to a range of 4K to 1080p. When several different displays are connected, you can apply the color space conversion (4:4:4 to 4:2:0). The CEC Active Source command allows you to reset the input selection on CEC-compatible displays connected to the unit. The unit features front-panel OSD and RS-232 controls, one HDMI input, and four HDMI outputs. The back panel features four HDMI outputs, one HDMI input, a USB input, an RS-232 connector, and a 5 VDC power input.

4K UHD Switching Splitter    8 x HDMI Outputs / 2 x HDMI Inputs    Group Mode    Up to 10-Bit and 12-Bit HDR Processing    Supports LPCM 7.1 & HD/Bitsream Audio    Down-Scaling/Color Space Conversion    Supports 8 Internal & 8 External EDIDs    Supports CEC Commands    OSD & RS-232 Front-Panel Controls

HDCP 2.2 and HDCP 1.0 compliant

Supports up to 4K UHD video signals

Eight HDMI outputs, two selectable inputs

Group Mode allows the unit to function as two independent 1 x 4 splitters

Supports 10-bit and 12-bit HDR formats: HDR, HDR10, and Dolby Vision

Supports LPCM 7.1, Bitstream and HD Bitsream audio pass-through

Per-output, selectable, 4K to 1080p down-scaling/color space conversion (4:4:4 to 4:2:0)

Independent HDCP management engine for each output

Supports eight internal EDIDs, eight external EDIDs copied from connected devices, and two user-provided EDIDs

Support for the CEC active source command to periodically reset input selection on CEC-compatible connected displays

Front-panel OSD and RS-232 controls

Related Questions and Answers

Q: 1. I just purchased this and it is on its way to me. I want to use this device to pass 4K video/audio to two devices. One is a 4K UHD TV and one is a Marantz Preamp processor. I want to send the source video/audio directly to the TV while additionally sending the source video/audio to me processor for sound only. Can I do this with the HD Fury Pro 2x1 splitter?

A: The HDfury Pro 1x2 UHD 4K HDMI Splitter will work fine with passing a 4k UHD signal, and will mirror the source, and can pass it through to any device that would accept the original source. As long as your Marantz Preamp Processor will accept the original source, it should work fine.

Q: 2. Does this support 120Hz?

A: Sadly this splitter is not designed for passing a 120Hz signal from the video source through to the connected displays. However in some cases that feature may not even be needed. A large percentage of TVs that display at 120Hz are actually achieving 120Hz by internal processing or altering of a 60Hz signal.

Q: 3. will this splitter allow me to extend the monitors? If I use this for my laptop connecting 2 monitors will I be able to view 3 difference screens?

A: Connect this to your computer and two external monitors you will have three screens. Use your computer display settings to get the screens configured.

Q: 4. Can I use this to connect and switch between Direct TV HDMI cable and Apple HDMI cable for Netflix? Not sure I am asking question correctly. Currently if I want to watch Netflix I have to remove the DirectTV HDMI cable from the back of my TV and then connect the Apple HDMI cable to the TV. I want to be able to switch between both without having to change cables.

A: This product will not work for you. This is a Splitter, which takes a single input and splits it to 4 outputs. What you need is a Switcher, a product that gives you multiple inputs to a single output. Comprehensive makes 4k HDMI 3x1 and 5x1 Switchers with HDCP 2.2, they are B&H Numbers COCSWHD301K & COCSWHD501K. You will want to look in to these items instead.

Q: 5. Does this device support splitting and downscaling Dolby Vision?

A: The HDfury Pro 1x2 UHD 4K HDMI Splitter supports splitting as its first and main task. It handles HDR but does not mention if it handles Dolby Vison.

Q: 6. If there is no audio input via 3.5mm jack, do the 3.5mm output jacks send HDMI audio? Will each output need amplification?

A: You have the option of sending the audio via the HDMI or the 3.5mm output. That audio will have to go through an audio system.

Q: 7. Is the audio an input or output? I wanting to marry processed audio with the mixed HDMI signal.

A: The only audio is what is embedded in the HDMI. So that we may be of better assistance in getting the product you need, please email us. provideo@bhphoto.com.

Q: 8. Has anyone experienced any latency issues with this splitter?

A: Unfortunately, StarTech does not offer latency specs for the StarTech ST122HD4KU 1x2 UHD 4K HDMI Splitter.

Q: 9. Is there any loss of quality with this spiller vs a direct connection from a 4K TV?

A: No, the digital signal that is duplicated by the StarTech ST122HD4KU 1x2 UHD 4K HDMI Splitter (B&H #STST122HD4KU) is maintained at up to UHD 4K (3840 x 2160) for each output.

Q: 10. Can I set up 2 monitors from 1 computer with this splitter?

A: Yes, this product will allow you to use 2 monitors from one computer.