Flowcine Xarm Telescoping Arm Posts For Tiffen 0.51"
- Product Code: eq67404
-
Availability: In Stock
Extend the height of your gimbal sled when using the xARM with these aluminum FLOWCINE xARM Telescoping Arm Posts for Tiffen 0.51"from Flowcine. The two telescoping posts are 6.5 and 10.5" long and fit a 0.51" Tiffen gimbal post.
Using either arm fully telescoped will extend the height of the gimbal sled up to 4 and 8", respectively. Two post grips are included to install on the top and bottom of the post connection to prevent the post from sliding out. The posts lock into the xARM using an M4 Allen wrench, which is included with the separately available xARM.
Raise Gimbal Sled Height 6.5 and 10.5" Long Posts for xARM Extend Original Arm Height up to 8" For Tiffen Gimbals with 0.51" Post Two Post Grips to Prevent Sliding Titanium Construction
| Parameters | |
|---|---|
| Material of Construction | 7075 Aluminum |
| Diameter | 0.51" / 13 mm |
| Length | 1 x 10.5" / 265 mm Post 1 x 6.5" / 165 mm Post |
| Maximum Height | 8" / 203 mm Above Original Height with Long Post 4" / 103 mm Above Original Height with Short Post |
Flowcine xARM stabilization arm
Tiffen gimbals with 0.51" post
Related Questions and Answers
Q: 1. Will this work with the Easyrig 2 400 Support Bar?
A: Yes, this will work.
Q: 2. Can this kit be hung upside down safely when clamped to ceiling rigging?
A: No, the Auray Telescoping Boom Arm Mic Stand with Table Clamp Mount is not intended to be mounted upside down. The tension screw that secures the arm in the clamp may not be capable of supporting the weight of a microphone and any accessories when it is mounted upside down.
Q: 3. Is this compatible with an Easyrig Minimax?
A: No it is not.
Q: 4. Can you send me a list of what all comes in this purchase?
A: Black Complete takes 5-32 kg (11-70 lbs)TranquilizerPro Case
Q: 5. Where can I get a replacement for the rubber band that helps control movement with the easy rig?
A: For Flowcine replacement parts, please contact them directly. a href= http://www.flowcine.com/contact-us. target= _blank www.flowcine.com/contact-us./a For EasyRig replacement parts, please contact them directly as well. www.easyrig.se/page/contact.
Q: 6. Has anyone tried to use the FLOWCINE Serene with a Flycam Flowline vest?
A: Yes I purchased be and it works great! It's rather difficult to install onto the easy rig though!
Q: 7. What's the weight?
A: The Bright Tangerine Morrissey 15mm LWS Lens Support with 1/4" & 3/8" Posts weighs a total of 0.2kg.
Q: 8. I need to get a boom arm for video shoots but I have had bad experience with microphone stands. Is it possible to fit this arm on a light stand or does it only fit on a mic stand?
A: You will need an adapter bushing (B&H # AUADCOMBOS) to connect the two. The boom has 5/8 female threads and your light stand probably has either 1/4 or 3/8 male threads.
Q: 9. Could the serene be mounted on an Easyrig Cinema 3 ?
A: Yes, you will be able to mount this pn the Easyrig Cinema 3.
Q: 10. Could this be mounted to the EasyRig MiniMax?
A: According to FLOWCINE, this is to be used with the Easyrig 2/2.5/3 and Vario 4/5 support bars.
Top Bestselling Products
Flowcine Xarm Telescoping Arm Posts For Pro (0.625")
$795.00 $1,256.10
Flowcine Xarm Telescoping Arm For Tiffen 0.74"
$795.00 $1,073.25
Flowcine Gimbal Arm Post Kit For Xarm Stabilization (tiffen 0.51")
$1,650.00 $2,442.00
Flowcine Gimbal Arm Post Kit For Xarm Stabilization (tiffen 0.74")
$1,650.00 $2,244.00
Flowcine Xarm Double-section Stabilization Arm
$41,400.00 $59,202.00
Flowcine Gimbal Arm Post Kit For Xarm Stabilization (pro 0.625")
$1,650.00 $2,326.50
Flowcine Xspine Xr3ach Xarm Bundle
$61,005.00 $84,186.90
Flowcine Xarm High/low Mode Link Bracket
$495.00 $732.60
Flowcine Xspine Xr3ach Xarm Front Mount Bundle
$62,565.00 $76,954.95
Flowcine Purple Spring Core Xarm Stabilizer (52-64 Lb)
$1,935.00 $2,941.20
Flowcine Orange Spring Core For Xarm Stabilizer (44.5-56 Lb)
$1,935.00 $2,767.05
Flowcine Blue Spring Core For Xarm Stabilizer (37-49.5 Lb)
$1,935.00 $3,096.00
Flowcine Green Spring Core For Xarm Stabilizer (31-43 Lb)
$1,935.00 $2,573.55
K&m 211/1 Telescoping Boom Arm - Black
$125.97 $175.10
K&m 211/1 Telescoping Boom Arm 5/8" Chrome
$137.97 $215.23
Flowcine Teal Spring Core For Xarm Stabilization Arm
$1,935.00 $2,360.70
Flowcine Xspine Vest Front Mount Xbone Xarm Stabilization System
$54,795.00 $69,041.70
Flowcine Xspine Vest Xr3ach Xarm Bundle Goofy
$61,005.00 $82,966.80
Flowcine Xspine Vest Xbone Cf Xarm Stabilization System
$53,220.00 $80,894.40
Hawk-woods Bpa-mx1 Charger For Canon Bpa Batteries
$465.00 $595.20
Products You May Like
Eylar Large Crossover Aluminum Overland Storage Box
$719.97 $899.96
Vello Freewave Viewer Cable For Nikon Cameras
$11.85 $18.01
Samsung 512gb Usb 3.1 Gen 1 Bar Plus Flash Drive Titan Gray
$194.97 $235.91
Portkeys Pt6 5.2" 4k Hdmi Touchscreen Monitor
$327.00 $513.39
Om System Lc-95 Lens Cap | Compact Camera Accessory
$59.97 $93.55
Hitech Firecrest Ultra Nd Filter 58mm 13-stop
$458.70 $701.81
Adderlink X-dvi Pro Multiscreen Kvm Extender
$4,441.50 $5,951.61
Gefen Vga Kvm Ip Transmitter | Remote Access Solution
$1,139.85 $1,652.78
Wireless Mic Belts Sw-ak-470 For Akg Pt470 Transmitter
$84.00 $104.16
Countryman B6 Omni Lavalier Mic For Lightspeed Transmitters
$1,214.85 $1,785.83
Newcon Optik Nvs-15 3rd Gen Autogated Nvd Binocular
$50,043.00 $69,559.77
American Dj Ubl9h Rgbal+uv Linear Light Bar 9 Leds
$989.97 $1,484.95
Digipower Pro3 180 Led 3-light Kit With Stands
$899.97 $1,403.95
Black Label Bag M3 Leather Strap - Black
$237.00 $315.21
Rca Female To Bnc Male Adapter For Audio
$7.50 $11.93
Rode Hs2 Lightweight Headset Microphone Black Large
$897.00 $1,139.19
Lenovo Thinkcentre M90q Gen 3 Tiny Desktop Pc
$3,087.00 $4,630.50
Aquatech X-40a Adapter For Cameras
$447.00 $590.04
Chrosziel Right Front Side Bracket For Sony Burano
$717.00 $867.57
