Extend the height of your gimbal sled when using the xARM with these aluminum FLOWCINE xARM Telescoping Arm for Tiffen 0.74"from Flowcine. The two telescoping posts are 6.5 and 10.5" long and fit a 0.74" Tiffen gimbal post.

Using either arm fully telescoped will extend the height of the gimbal sled up to 4 and 8", respectively. Two post grips are included to install on the top and bottom of the post connection to prevent the post from sliding out. The posts lock into the xARM using an M4 Allen wrench, which is included with the separately available xARM.

Raise Gimbal Sled Height    6.5 and 10.5" Long Posts for xARM    Extend Original Arm Height up to 8"    For Tiffen Gimbals with 0.74" Post    Two Post Grips to Prevent Sliding    Titanium Construction

Flowcine xARM stabilization arm
Tiffen gimbals with 0.74" post

Related Questions and Answers

Q: 1. Where can I get a replacement for the rubber band that helps control movement with the easy rig?

A: For Flowcine replacement parts, please contact them directly. a href= http://www.flowcine.com/contact-us. target= _blank www.flowcine.com/contact-us./a For EasyRig replacement parts, please contact them directly as well. www.easyrig.se/page/contact.

Q: 2. Do I need an adaptor to attach a Shure MV7 microphone to this mic stand?

A: No. You just unscrew the included mic clip and screw on the MV7.

Q: 3. Does the boom arm unscrew from the clamp?

A: Yes, the Auray Telescoping Boom Arm Mic Stand with Table Clamp Mount can be unscrewed from the stem that attaches to the clamp and then used with a standard microphone stand. The stem can also be removed from the clamp by loosening the tension screw on the top of the clamp.

Q: 4. is this compatible with the K&M 237B Table Clamp (Black) ? BH #KM237B • MFR #23700-500-55

A: Yes. These two items are compatible. Be aware of the microphone and shock-mount weight.

Q: 5. Will this work with the Easyrig 2 400 Support Bar?

A: Yes, this will work.

Q: 6. Will this fit on an Exovest?

A: We have not been able to test the Flowcine Tool with the Stedicam Exovest. Here is more info about the tool. https://bhpho.to/3Ba5fnQ

Q: 7. Can you send me a list of what all comes in this purchase?

A: Black Complete takes 5-32 kg (11-70 lbs)TranquilizerPro Case

Q: 8. Can the spring be locked out for use. Ive heard that some people say it can be bouncy if you are doing non gimbel shots where you dont walk ?

A: This is not an issue we have heard of. To answer your question, the Serene can not be locked off. You can turn the spring force all the way up so it does not flex. Once you are finished with your shot, be sure to reduce the spring tension to save wear. You might be interested in the new Line Guide for Serene. It may align the string better for you. It is brand new and not yet here at B&H. http://easyrig.se/page/top-secret-from-easyrig

Q: 9. Is the pivot mount steel or plastic?

A: In 2014, when I bought mine, the mount was steel. I cannot guarantee that they still are today, but mine have been very durable and solid.

Q: 10. Could the serene be mounted on an Easyrig Cinema 3 ?

A: Yes, you will be able to mount this pn the Easyrig Cinema 3.