This Watson Pro 4 High-Draw 158Wh Slim Batteries Dual Charger V-Mountsupports two V-mount batteries and offers a 4-pin XLR power output, providing dual-purpose functionality in a portable, handy design. It's capable of simultaneous charging, and the XLR port offers useful versatility. An ergonomic carry handle, flip-out kickstand, rubberized feet, On/Off switch, and LED status indicators complete the design and allow for comfortable and efficient operation.

This charger is able to charge two batteries with up to 6.6Ah capacities simultaneously, delivering 2.5A to each battery. For batteries with capacities of 8.8Ah or more, it provides sequential charging at 5A, first charging one to 85%, and then switching to fully charge both.

The 4-pin XLR power output can be used to power select cameras from an AC outlet or off of connected batteries. A special feature of this charger is that when it's connected to a power outlet, it is capable of charging the batteries and providing power through the XLR output at the same time, as opposed to one or the other as is more common.

Additionally, an XLR cable is included, giving you everything you need to make full use of this charger. The charger supports 100-240 VAC power input, so it can be used worldwide with the right plug adapters (sold separately).

4 x 14.4V 158Wh Slim Li-Ion Batteries    Up to 12A Draw    Dual-Position Charger with XLR DC Output    XLR Cable Included    12V, 10A D-Tap Output    Approx. 4-Hour Runtime with 35W Load    Built-In Intelligent Circuitry    100-240 VAC Worldwide Power Input

• Supports two V-mount lithium-ion batteries
• 4-pin XLR DC power output
• Capable of sequential and simultaneous charging, depending on capacities
• Capable of charging batteries and providing power through the XLR output at the same time
• Ergonomic carry handle
• Flip-out kickstand
• Rubberized feet
• On/Off switch
• LED status indicators
• 100-240 VAC power input
• XLR cable included

• When connected to an AC outlet, delivers power at 16.7V and 4.5A
• When not connected to an outlet and with a battery/batteries attached, delivers 15V and 4.0A

• Charges a single battery at 5A
• Delivers simultaneous charging at 2.5A per channel for batteries with up to 6.6Ah capacities
• Provides sequential charging at 5A for batteries with capacities of 8.8Ah or more

4.4Ah

Single: 2.5 hours

Dual: 2.5 hours simultaneously

6.6Ah

Single: 3.8 hours

Dual: 3.8 hours simultaneously

8.8Ah

Single: 2.5 hours

Dual: 5.0 hours sequentially

11Ah

Single: 3.2 hours

Dual: 6.5 hours sequentially

13.2Ah

Single: 3.8 hours

Dual: 7.6 hours sequentially

15.6Ah

Single: 4.2 hours

Dual: 8.5 hours sequentially

Related Questions and Answers

Q: 1. Will this power a Litepanels 6X Bi-Color LED Panel? If so, how long at 50% power?

A: When using the Watson Pro 14.4V 158Wh Slim Li-Ion 2-Battery Kit with Single D-Tap Charger (V-Mount), each battery will give you approximately 3 hours at 50% brightness on the Litepanels Astra 6X Bi-Color LED Light Panel.

Q: 2. are you able to turn the battery off while connected to camera?

A: There is no way to turn the battery off while it is connected to the camera.

Q: 3. i have this batteries, suddenly they wont work with anything (cameras, plates, d-tap), but they do charge, any ideas how to fix this?

A: Yes, Please contact our liv-chat team for support.

Q: 4. Does this battery work with a Marshall V-R70P-HDA?

A: That monitor uses V-Mount batteries. It will work if you have an adaptor from gold mount to v-mount.

Q: 5. Does this battery have to be voltage regulated for use with multiple variants of devices such as Atomos monitors mixed with edelkrone products running from one battery?

A: Yes. Because the Atomos Ninja's input voltage is 5.8-7.2V (battery), and the output voltage of almost any block battery is at least 14.4V, the battery cable needs to be regulated.

Q: 6. So this is just a rebadged FXlion battery? Is it identical?

A: The Watson 14.4V 50Wh Micro is not identical but similar in features to the Fxlion NANO ONE 50Wh. The Watson is listed as 14.4V and alternatively the Fxlion is listed as 14.8V.

Q: 7. Can this battery be charged with a standard Anton Bauer Gold Mount charger?

A: At this time we are recommending using Anton Bauer chargers only for Anton Bauer batteries.

Q: 8. Would this battery charge on the IndiPRO dual Vmount charger?

A: Yes, the Watson Pro 14.4V 158Wh Slim Li-Ion Battery (V-Mount) will charge on the IndiPRO dual Vmount charger

Q: 9. Can I use this with the Tilta gold mount plate for the fx6?

A: You can use Watson Pro 4 x High-Draw 158Wh Slim Batteries with a Tilta Battery Plate for Sony FX6.

Q: 10. Does this battery works with a Sony Fx6?

A: The Watson Pro 14.4V 98Wh Micro V-Mount Battery with USB Type-C Port could power the Sony FX6 with the BP-U dummy battery, such as the Anton/Bauer P-Tap to BP-U30/60 Dummy Battery (14.4V) (BH #ANPTBPDB7.2).