Speed up load-ins and load-outs by using less cables and connections with the SoundTools SuperCAT Sound Tails Male EtherCON to Four Male XLR Breakout Cable, an easy-to-use breakout cable that lets you transmit four channels of high-resolution balanced analog audio over one slim EtherCON cable, terminating in four 3-pin male XLR connectors.

Stylish and made of rust-free anodized aluminum to last a lifetime, the breakout cable is 52" long and has a 44" span. It is terminated with four black Neutrik female XLR connectors at one end and a male EtherCON connector at the other. The cable connects to Cat 5e cables with the Neutrik NE8FF EtherCON adapter (available separately) and is compatible with 48V phantom power.

4 Channels of Analog Audio over EtherCON    Male EtherCON to 4 Male XLR Cable    Length: 52" / Span: 44"    Transmits Balanced Signals    Compatible with 48V Phantom Power    3-Band Strain Relief System    Black Neutrik XLR Connectors    Rust-Free Anodized Aluminum Construction    Sturdy Canvas Bag

The SoundTools SuperCAT Sound cable allows the SuperCAT Tails to achieve a new level of simplicity at a lower cost while enhancing reliability and reducing weight. The SuperCAT Sound Tails implement a male EtherCON cable mount on one end, terminating to four XLR 3-pin, DMX 5-pin, or 1/4" connectors on the other end. The SuperCAT Tails can be directly plugged into SoundTools CAT Tails forming a disconnectable four channel male-to-male cable or can be used to create four channel adapters of differing genders and connector types.

The SuperCAT Tails combine key aspects of both the SoundTools CAT Tails and SuperCAT Sound cable to create a high-quality, durable and cost-effective product specifically aimed to excel in high-impact, touring environments. The SuperCAT Sound cable is designed with sound in mind; each of the four twisted pairs has its own separate drain wire and shield, and each pair is precisely twisted to eliminate crosstalk, reject outside noise, and allow for better frequency response.

Designed by SoundTools, the 3-band strain relief system offers enhanced durability and prevents the shrink-wrap from flaring or slipping at the crucial junction of the four cables.

• Wrap 1: Binds the four nylon-mesh-covered cables together.
• Wrap 2: Offers support for the transition of the four cables to the SuperCAT Sound Cable.
• Wrap 3: Adds diameter and maximizes adhesion of the shrink tubing the the SuperCAT Sound Cable.

The SuperCAT Tails are compatible with products in the RATCAT family, including the SoundTools CAT Box, CAT Rack, CAT Tails, and WallCAT, allowing you to create a comprehensive and versatile modular snaking system. They can also be used with a shielded EtherCON connector, such as the Neutrik EtherCON adapter (NE8FF).

SoundTools aims at minimizing waste and whenever possible. The company incorporates reusability into their package designs. The SuperCAT Tails is packaged in a sturdy canvas bag, which allows you to stay organized while protecting your tools and makes for a fantastic toiletry bag, sharpie case, or snack holder—the possibilities are endless.

Related Questions and Answers

Q: 1. Will this allow a Zoom H6 line out signal to be sent into both XLR ports of the Ursa Mini Pro camera?

A: Yes, the Hosa stereo mini to dual XLR cable can be used to send the line out audio from a Zoom H6 to the XLR inputs on the Ursa Mini Pro camera. Since you are sending a line level signal, make sure that you set the camera inputs for line level audio.

Q: 2. Will this cord work with an iPad for shooting video?

A: No! It will send you audio signal to where ever you plug it in, which would have to be that accepts XLR connectors. This is an audio cable and will not work with digital video, unless you are transferring or sending the audio signal which can be separated from the video with pro equipment. Based on your question, you probably are not a professional. By the way, the industry term is cable . Cord refers to lamp cord, or what's called zip cord. It's used on all sorts of consumer products, but is not suitable for anything other than the power source, that is plugging into an electrical outlet.

Q: 3. Can I use this to connect the Rode Wireless Go II Receiver to two XLR inputs on a Zoom 6 audio recorder?

A: Yes, a cable like that can work to connect to two XLR mic inputs. The wireless Go II can use stereo output to split each channel, to be recorded on separate tracks on the Zoom F6 or H6.

Q: 4. Does this cable provide P48?

A: Hi,The cable it's self does not provide p48V but when connected to the 7 Atomos monitor recorders you can select the option in the audio menu to turn on the Phantom power.

Q: 5. ... each TRS connecter in this cable??

A: Hi Jose, The two "Y" ends of this cable meet in the center. In the case of the 6-foot cable, they would meet roughly at 3 feet. This was a change we made after the product was released. That means models that were previously purchased may be different and have a shorter split. Thank you for considering Hosa for your connectivity needs. Best regards, Hosa Support Team

Q: 6. Can this be used with a conventional analog audio mixer. Phoenix connector to three inputs on the mixer?

A: Unfortunately it cannot. It comes with an RJ45 output and includes an RJ45 to XLR male adapter for connection to ClearOne INTERACT AT mixers.

Q: 7. how long is the length of cable from the XLR connectors to where they meet?

A: the 6' cable splits in half (3') where the mini plug end breaks into the 2 xlrs

Q: 8. Would this cable work for the Godox VL 300?

A: Yes, this will work with the Godox VL 300. But you might be needed a Female 4-pin XLR ot a Male 4-pin XLR cable. https://www.bhphotovideo.com/c/product/1091267-REG/genaray_mb_bcxlr_12v_battery_xlr_cable.html BH #GEMBBCXLR

Q: 9. Will this cable split the left and right channels of a stereo output or is it the same signal coming out of both XLRs?

A: This cable will separate the stereo signal out to left and right mono XLR outputs.

Q: 10. My JBL audio speakers are separated 43 inches approx. What is the distance maximum between each XLR connecter in this cable??

A: About 36" apart.