The Meopta MeoNight 1.1 Night Vision Riflescope Clip-Onfrom Meopta MeoNight 1.1 Night Vision Riflescope Clip-Onconverts your day riflescope into a night vision device. It can be mounted on a Picatinny rail in front of your scope or, with the correct separately sold adapter, clipped to the back of the scope itself. The MeoNight features a Gen II+ Photonis XX1441 intensifier tube, manual gain, resolution of >55 lp/mm (typically 67), and an SNR of >18. The device is equipped with a low-battery indicator and automatic shutoff that activates after one hour.

The non-magnifying device is fitted with a 50mm f/1.6 lens, bearing Meopta's MeoBright antireflective coating for optimal light transmission and MeoDrop hydrophobic coating, which sheds water and dirt to keep the objective clean. Minimum close focus is 33', and the field of view is a generous 12°. Power is provided by one user-supplied CR123 battery.

Gen II+ Photonis XX1441 Intensifier Tube    1x Magnification/12° AFOV    50mm, f/1.6 Lens System    Can Be Used as Handheld Monocular    Hydrophobic Coating Keeps Lens Clean    Antireflective Coating    Mounts to Picatinny Rail/Scope Objective    Nitrogen-Filled, Fogproof & Waterproof

• Gen II+ Photonis XX1441 intensifier tube

• Manual gain

• Resolution of >55 lp/mm (typically 67), signal to noise ratio >18

• Magnification: 1x

• Lens system: 50mm f/1.6

• Field of view: 12°

• Close focus: 33'

• Can be used as handheld monocular

• Separately sold adapters for attaching directly to riflescope

• External brightness control

• Auto shutoff after one hour

• Low battery indicator

• Compatible with Picatinny rails

• Nitrogen-filled, fogproof, and water resistant

  Related Questions and Answers

  Q: 1. Is this a 670 nanometer red light?

  A: The LEDs emit visible red light but a particular frequency is not specified. So if you need something in the upper end of the near-infrared spectrum I would suggest looking for another light. This is a lower end light, consisting of two LEDs a rheostat and 9V battery connector in a non-weather resistant case.

  Q: 2. Does the red flashlight 3CEFLNVtake a STANDARD 9V battery?How much shipping/handling cost/?

  A: The light takes a standard 9V battery.Add the item to the cart online to calculate shipping to your address.

  Q: 3. "It displays the imagery on a 640 x 480 black and white screen". What is the resolution recorded to the memory card? Thank you.

  A: The MFR needs to be contacted for this answer.

  Q: 4. With the laser range finder does it compute a new endpoint and projected on the reticle based on the ballistic information?

  A: Yes. The with the PARD FD1-850 Front Night Vision Clip-On Scope (850nm) the end point is dependent of the ballistics information.

  Q: 5. can I view the scene without using the digital readout?

  A: You can review your photos and videos on the Night Vision Binocular itself. Keep pressing the MODE button until you get to the Gallery mode. Use the ZOOM and IR buttons to scroll up and down your photos and videos.

  Q: 6. Can this be used with the Canon XF605?

  A: The AstroScope Night Vision Adapter 9350-EOS-3PRO is not compatible with the Canon XF605 video camera.

  Q: 7. does it come with a neck strap?

  A: A strap is Not included from the manufacturer.

  Q: 8. can I view the scene without using the card?

  A: You can review your photos and videos on the Night Vision Binocular itself. Keep pressing the MODE button until you get to the Gallery mode. Use the ZOOM and IR buttons to scroll up and down your photos and videos.

  Q: 9. What is the part of the lens that is light grey in the picture but also isn't a part of the camcorder?

  A: The AstroScope Night Vision Adapter 9350-HMC-3LPRO BH #ASNVAHCM150 • MFR #914938 is an adapter that goes between the camcorder body and the detachable lens. The lens is added to the front of the AstroScope Night Vision Adapter

  Q: 10. Does this have night vision video recording?

  A: Yes it does: Night Vision Functionality.