The FotodioX WonderPana FreeArc Core Unit Kit for Olympus 7-14mm PRO Lensis a two-piece assembly designed to be used in combination with a FotodioX WonderPana FreeArc Core Unit, a WonderPana 145 Core Unit, or a WonderPana FreeArc Aluminum Step-Up Ring. A WonderPana Core Unit or a WonderPana FreeArc Aluminum Step-Up Ring with the WonderPana 6.6" Holder Bracket attached can then allow for the convenient use of two 2.5 to 4.0mm-thick filters measuring 6.6" wide, or one 2.5 to 4.0mm-thick filter measuring 6.6" wide along with one FotodioX 145mm round filter behind it.

Use of this holder bracket is easily accomplished by separately attaching its two assembly pieces to opposite sides of a WonderPana Core Unit or a WonderPana FreeArc Aluminum Step-Up Ring using the six included brass short-screws. Pre-tapped threaded inserts along the edge of a WonderPana Core Unit or FreeArc Aluminum Step-Up Ring accommodate those screws and ensure correct positioning of the two assembly pieces so that they are positioned parallel to each other and can hold a 6.6"-wide filter between them. The combined WonderPana Core Unit, or WonderPana FreeArc Aluminum Step-Up Ring, and WonderPana 6.6" Holder Bracket can then be attached to a compatible lens.

For WonderPana Core Units that consist of a rear lens collar and a front filter holder, pre-tapped threaded inserts along the edge of the front filter holder accommodate the six brass short-screws for correct positioning of the WonderPana 6.6" Holder Bracket's two assembly pieces. Once the holder bracket and a front filter holder are combined, and the separate collar has been slid over the rear of a compatible lens until it has achieved a secure fit, the front filter holder with the attached holder bracket can be screwed onto the front of the installed rear lens collar.

After being fitted onto a compatible lens, the bearing design of the WonderPana FreeArc Core Units and WonderPana FreeArc Aluminum Step-Up Rings allows a WonderPana 6.6" Holder Bracket to be rotated 360°. This permits the use of graduated neutral density and other filters that are enhanced by varied positioning. While a WonderPana 145 Core Unit does not include a 360° rotating mechanism, eight pre-tapped threaded inserts all around its edge allows the WonderPana 6.6" Holder Bracket to be installed in 45° increments so that rectangular filters placed within it can be angled to the best approximate position relative to the subject in front of the camera.

The FotodioX WonderPana 6.6" Holder Bracket provides two pairs of filter slots, a configuration that accommodates two compatible rectangular filters. For each rectangular filter that is placed within one of the holder bracket's slots, its position can be secured using the included brass long-screws. Pre-tapped threaded inserts along the outside of the holder bracket allow the long-screws to each apply pressure to a spring-loaded retainer within each filter slot. When a pair of the long-screws are used, the level of grip upon a rectangular filter can be varied, which can complement the use of graduated filters whose effect can be adjusted to better suit changing lighting conditions or creative demands by sliding them up or down within a filter slot.

Each FotodioX WonderPana Core Unit or WonderPana FreeArc Aluminum Step-Up Ring includes front filter threads, which allow a FotodioX 145mm round filter to be used along with this filter holder. If a 145mm round filter is used on the attached WonderPana Core Unit or WonderPana FreeArc Aluminum Step-Up Ring, the rectangular filter slot closest to the rear of the holder bracket becomes unavailable. The WonderPana 6.6" Holder Bracket features a lightweight, aluminum-alloy construction that has a corrosion-resistant, black anodized finish for durability. A rigid pouch is included for storage and transport.

For Olympus M.ZUIKO 7-14mm f/2.8 PRO    WonderPana FreeArc Core Unit, Lens Cap    WonderPana 6.6" Holder Bracket    145mm Solid Neutral Density 3.0 Filter    1000x Filter Factor, 10-Stop    Darkens Entire Image    6.6 x 8.5" Graduated ND 0.6 Filter    Hard-Edged Line of Transition    Up to 4x Filter Factor, 2-Stop    Reduce Exposure in Selective Areas

• When used with a FotodioX WonderPana FreeArc Core Unit, a WonderPana 145 Core Unit, or a WonderPana FreeArc Aluminum Step-Up Ring, allows for the convenient use of two filters measuring 6.6" wide, or one filter measuring 6.6" wide along with one FotodioX 145mm round filter installed on a Core Unit or FreeArc Aluminum Step-Up Ring
• Provides two pairs of filter slots, a configuration that accommodates up to two 2.5 to 4.0mm-thick rectangular filters
• Allows up to two compatible rectangular filters to be rotated 360° when used with a FotodioX WonderPana FreeArc Core Unit or WonderPana FreeArc Aluminum Step-Up Ring
• When used with a WonderPana 145 Core Unit, allows up to two compatible rectangular filters to be installed in 45° increments so that a filter placed within it can be angled to the best approximate position relative to the subject in front of the camera
• Ability to vary grip on each installed rectangular filter to complement the use of graduated filters whose effect can be adjusted to better suit changing lighting conditions or creative demands by sliding them up or down within a filter slot
• Lightweight, aluminum-alloy construction with a corrosion-resistant, black anodized finish for durability
• Rigid pouch included for storage and transport

Related Questions and Answers

Q: 1. Hi. Is this 7-14mm f/2.8 PRO lens compatible with Olympus PT-EP13 underwater housing ?

A: The Olympus PT-EP13 housing as sold is not compatible with the 7-14mm. Though, you might be able to get a third party dome port. I would suggest contacting our Underwater Department directly via email: uw@a href= http://bhphoto.com target= _blank bhphoto.com/a

Q: 2. What is the best way to clean the ZERO coated lens such as this? Especially since a filter cannot be placed on it.

A: I called Olympus tech support. Any photographic lens cleaning solution can be used. Use a microfiber cloth and spray one corner of the cloth with cleaning solution. DO NOT spray the cleaning solution directly on the lens. Starting in the middle of the lens, rub the corner that has been wetted with the solution in a circular motion out toward the periphery of the lens. Repeat the motion with the dry portion of the microfiber cloth. Use a light touch with the cloth at all times to avoid trapping any debris against the lens and scoring it accidentally.I usually used a blower to puff some air on the lens to clean off as much dust and loosely adhered debris prior to using any cleaning solution. It may be that you won't need to use the cloth/cleaning solution at all.

Q: 3. It appears this lens will not accept filters. Is this true?

A: The Olympus 7-14mm f/2.8 does not have a filter thread, so will not accept standard circular threaded filters. And, at this time there isnt a filter holder option for the lens.

Q: 4. Will this lens fit the E-M5iii body?

A: Yes it will!

Q: 5. How is this lens for night orastro photography?

A: Very good lens

Q: 6. Does this M.Zuiko 7-14mm PRO lens change length as it zooms like the M.Zuiko 12-40mm PRO or does it maintain the same length and do all it lens movements internally like the M.Zuiko 40-150mm PRO?

A: The lens front glass element changes position (1 ) within the stationary lens hood as it zooms between 7-14mm (most retracted @ 14mm.) The length of the overall lens unit remains fixed (lens hood itself does not extend or retract, and the front glass element doesn't extend beyond the longest edge of the tulip hood.)

Q: 7. What are the chances that Oly has eliminated the infamous wide-open purple fringe aberration found on the Panasonic 7-14mm?

A: Its impossible to know to what extent there may not be purple fringing until the lens is released. That being said, it will have a different optical design with different coatings, so should perform differently than the Panasonic version. Though, purple fringing is always a possibility with super wide zooms. If you shoot stopped down and reframe your shot to avoid high contrast, it can help avoid chromatic aberration.

Q: 8. Is this fisheye or rectilinear?

A: It is rectilinear. It does have some mild distortion, but it is easily corrected in post.

Q: 9. How will this perform for photography on a Panasonic body without IS?

A: I use it on a Panasonic GH4 and Love it.

Q: 10. is this 7-14 mm lens to heavy for my Olympus m5IIII am a bigger and need wide angle for selling boats n(interior shots need to be better than Olympus kit lens 14-150mm? I have compared weight and I am adding 10oz.... thank you.

A: This lens would not be too heavy to use with the OM-D E-M5 III.