This Tilta Follow Focus Lens Drive Gear FF-T05 6mm 0.8 MOD 64-Toothattaches to your Tilta single-sided Cine Follow Focus and is used to drive cine-style lens gears. It features 64 teeth along its circumference, with a 0.8 MOD. Please note that this drive gear is not suitable for lenses with either Canon, Angenieux, or Fujinon focus gears. It is specifically designed to work with cine-style lens gears.

0.8 MOD, 64-Tooth    For Tilta Single-Sided Cine Follow Focus    Drives Cine-Style ENG Lenses

Related Questions and Answers

Q: 1. Is it possible to unmount the FF from the 15mm rod adaptor and mount it on a 19mm Tilta rod adaptor?

A: We do not recommend it because It is not designed to do that. This doesn't mean that it is impossible to mount the follow focus to a 19mm rod adaptor but you would likely lose the ability to easily slide left and right to accommodate different diameter lenses. Not to mention it would void the warranty in the event something happened to your follow focus as a result of this modification.

Q: 2. Can this system be used with a large lens like a Arri master anamorphic?

A: I haven't tried it, but a suspect it won't work with a lens like that. The sideways movement on this follow focus is not very extensive, so it may not work. If you are using a lens like that, I recommend you use either a wireless FF unit or an Arri studio follow focus like the FF4.

Q: 3. Since there's no manual when I bought this. How do you adjust this to work on larger sized lens like an 82mm? The wheel just goes over 360* degrees making the hard stop useless. Any ideas?

A: I am really sorry you are having issues with the Tilta Follow Focus. If you could please email us directly at provideo@a href= http://bhphoto.com target= _blank bhphoto.com/a we will be better able to assist you with this product.

Q: 4. Does this work with the Rokinon cine DS lenses?

A: Yes, this will work perfectly with any cine styled lens including all Rokinon cine lenses.

Q: 5. Can the drive gear be positioned on either side of the gearbox to accommodate a wider variety of mounting options?

A: Yes it can be mounted left or right side on the camera rods. For me, i use it left handed with the Sony FS7.Mounting it on the right side on this camera, may conflict with the handgrip.

Q: 6. Will this work with the titla a7 rig?

A: Yes it will. Is the same we have.

Q: 7. Will this follow focus work on the 24 mm Xeen Cine lens?

A: Yes, it will work!

Q: 8. this product have all this stuff? 1x Snap-on 15mm to 19mm rods adapter 3x Swing Arms (1:1.0/1:1.5/1:2.0 ratio) 2x Focus Knob/ Handwheel 1x Extension for Focus Knob 5x Module gears (0.8/64T, 0.8/38T, 0.8/43T, 0.6/64T, 0.5/78T) 1x 12 (300mm) Follow Focus Flexible Whip 1x Follow Focus Speed Crank handle 5x Marking discs 1x Hard Carrying Air Tight Safety Case ? or how much cost whit all stuff

A: The Tilta Single-Sided Cinema Follow Focus from ikan is compatible with 15mm and 19mm rod systems. In the Box:1x Focus Knob, not 2x (It wouldn't be Single Side with 2x)1x 15mm to 19mm rods adapter1x Whip1x Crank 4x Marking discs, not 5x3x Gears 1x Swing Arm, not 3xNo Extension, No Case.

Q: 9. Does this follow focus fit a Canon XA10?

A: As long as you secure the included rings around the lens. You will also need and make sure that you have a base plate with rails that you will need to attach the follow focus to in order to mount the follow focus to the lens.

Q: 10. Will this work well with the Canon C100 II?

A: I have this and I use it for Blackmagic Cinema and Production cameras and occasionally my Canon 5D Mk IV or 7D Mk II, to give you an example of the range of cameras it works on. What makes this work for me is I use Rokinon cinema lenses with the gears already built in. That being said, I would imagine it would work fine provided the gear from the follow focus will reach the gear on the lens since it sits up a little higher on the C100.