The lightweight 13.2 oz Magnus DLX-M1 4-Section Monopod for Photographyfrom Magnus DLX-M1 4-Section Monopod for Photographyextends by flipping the leg locks open and pulling it to a maximum height of 67.5". The durable, aluminum monopod can support camera gear weighing up to 6.6 lb, and cameras mount on the top via its 1/4"-20 threaded mount. With its rubber foot, the monopod won't slide on smooth surfaces, but it also has a retractable spike. Therefore, you can drive the spike into the ground to stabilize the monopod on soft or uneven terrain while holding the support by its neoprene grip and the strap around your wrist. The DLX-M1 closes to a compact 21.25", which enables you to practically take it anywhere.

Load Capacity: 6.6 lb    Maximum Height: 67.5"    Folded Length: 21.25"    Sections: 4    Weight: 13.2 oz    Aluminum Construction    1/4"-20 Threaded Mount    Flip Locks    Retractable Spike with Rubber Foot    Neoprene Grip and Wrist Strap

The durable, aluminum monopod can support camera gear weighing up to 6.6 lb.

With its rubber foot, the monopod won't slide on smooth surfaces, but it also has a retractable spike. So, you can drive the spike into the ground to stabilize the monopod on soft or uneven terrain.

Hold the monopod by its comfortable neoprene grip and with its strap around your wrist, which ensures no accidental mishandling.

Related Questions and Answers

Q: 1. Will this gimbal work underslung? Trying to put together a ceiling mounted DSLR rig.

A: This can operate that way. The arm can rotate fully to allow for it to be underslung.

Q: 2. I have a GIT304 Grand Series Stealth Tripod with Flat Plate MFP23 will this GH-M1 thread right in ??

A: Yes the Magnus GH-M1 Gimbal Head will thread right onto the Flat Plate MFP23.

Q: 3. The base of my gimbal head is slightly loose just above where it mounts to my tripod, so that when I loosen the lower arm locking screw, the gimbal head rocks slightly. Can the "GH-M1" logo plate on top of the base mount be pried off so I can tighten the mount slightly or add a shim to snug up the arm and eliminate the slight wobble?

A: The manufacturer do not list this as a possible solution. I would suggest contacting the manufacturer directly. Magnus Tel: 212-594-2120 Website http://www.magnustripods.com Email info@gradusgroup.com

Q: 4. Will it fit on my Sirui T-005BX?

A: Yes, the GH-M1 can fit onto the Sirui T-005BX.

Q: 5. Is the bottom part (rubber foot and spike) are removable? So, that I can screw it on a monopod base?

A: The foot of the Magnus DLX-M1 4-Section Monopod is not removable.

Q: 6. Does this work good with the Sony 200-600 mm lens?

A: The load capacity of the Magnus GH-M1 Gimbal Head is 30LBs. It will be able to handle the Sony FE 200-600mm f/5.6-6.3 G OSS Lens.

Q: 7. Is this gimbal wide enough to accommodate a "pro-sized" body; e.g. an older Nikon D3X? Thank you!

A: Gimbal heads can accommodate any camera body as you do not mount the camera to the gimbal, and instead mount the telephoto lens. Due to this, most DSLR bodies do not fit on the mounting platform and need to sit behind the gimbal.

Q: 8. Is the Magnus DLX-357 tripod head removable?

A: No, this tripod head is built-in and not removable or replaceable.

Q: 9. compatible with Oben AT-3586 Tripod?

A: This head is compatible with the Oben AT-3586 tripod.

Q: 10. what is the maximum diameter of the lens that this gimbal will accommodate?

A: The maximum diameter would be about 5.5 inches and almost all lenses are less than 5.5 inches around the tripod collar even if they are larger at the front.