Tilta Ronin-S 12V Power Cable Bmpcc 4K

Tilta Ronin-s 12v Power Cable Bmpcc 4k

Product Code: eq68069
Availability: In Stock

$57.00 $68.40

Qty

14 reviews Write a review

Description
Reviews (14)

The Tilta Ronin-S 12V Power Cable BMPCC 4Kenables powering your Blackmagic Design Pocket Cinema Camera 4K from the 12 VDC power output of your Ronin-S.

Provides Power to Camera from Gimbal Locking Camera Power Connector

Parameters
Material of Construction	Aluminum Alloy, ABS Plastic, Rubber
Connectors	Camera: 2-Pin Ronin-S: 4-Pin
Weight	0.5 oz / 14.1 g
Packaging Info
Package Weight	0.04 lb
Box Dimensions (LxWxH)	3.95 x 2.7 x 0.35"

Related Questions and Answers

Q: 1. Is it compatible with the BMPCC 6K?

A: Yes it should be. The Pocket Cinema Camera 4K and 6K share the same power connections.

Q: 2. Do you have to use a dummy battery when using this cable, or can the battery slot remain empty?

A: The battery slot remains empty.

Q: 3. Can this cable work on the new Ronin S2 gimbal?

A: This is specifically designed to work with the DJI Ronin S.

Q: 4. Can this be used to power the blackmagic PCC4K using the DC power out on a Zhiyun Crane 2?

A: Not that we are aware of. This product is meant to be used with Tilta battery plates and battery baseplates only.

Q: 5. Tilta TA-BTP-F970 NP-F970 Battery Plate

A: It is compatible.

Q: 6. Can this also power the Nucleus-M motor (and not just the Nano?)

A: The Tilta Nucleus-Nano 12V Ronin-S To 5V Micro-USB Motor Power Cable (B&H# TIWLCT04PCRN) is designed for and will work only with the Tilta Nucleus-Nano Wireless Lens Control Motor BH #TIWLCT04M).

Q: 7. Will this power the BMPCC 6K?

A: Yes, this will work with the Pocket 6K as well.

Q: 8. Will this work with Tilta's side power handles?

A: The Tilta 2.5mm DC Male Barrel Power Cable will not work with the Tilta Side Power Handles as it does not have an barrel port for powering, only USB for the Nucleus motors.

Q: 9. Could this power the Red Komodo?

A: It should work according to published specs, but we have not tested this particular combination.

Q: 10. Could this power a BMPCC 6K G2 from a SmallRig V-Mount adapter plate (#SM3203B)?

A: As the Tilta 2.5mm DC Male Barrel Power Cable for BMPCC 4K (17.2") is a 2.5mm sized barrel which matches the 12V barrel size on the SmallRig V-Mount Battery Adapter Plate with Dual 15mm Rod Clamp, BH #SM3203B, it should be compatible.

Jason	01/09/2024
[0.04 lb] We are using the BMPCC 4k/Ronin setup for out church services and always had to do a battery change at the worst possible moment in the set. Now the Ronin charges the camera the entire service with a couple of bars left on the Ronin battery. We were looking into a v-mount setup until I found this cable and saved a ton of money and weight on the rig. 5

Jeff	29/08/2024
[0.04 lb] This cable is sturdy for your power source. 5

Dylan	25/08/2024
[0.04 lb] A must-have if you have the BMPCC4K/6K. Super useful. Only drawback is that the Ronin's battery life tanks. 5

Bryan	23/08/2024
[0.04 lb] honestly idk how anyone uses the pocket wo this cable. just wow 5

Aaron	09/08/2024
[0.5 oz / 14.1 g] Does the job and isn't too long leaving a bunch of real estate to coil up and make presentable on my rig. Perfect length. 5

Jocelyn	12/07/2024
[0.5 oz / 14.1 g] What more is there to say: when you use hard to find or proprietary connectors for your cables, you can pretty much charge as high as you want. For me, a cable like that shouldn't be sold for more than maybe $10. I don't blame B and H, but the manufacturer. But what choice do we have ? Nitpicking done. As for the cable, it's sturdy and works like it should. 5

Rudy	04/07/2024
[0.04 lb] A must have for gimbal work. I use this to power my bmpcc6k on my Ronin S. Because of the form factor it is impossible to swap out batteries without having to rebalance the camera on the gimbal. With this cable that is no longer necessary as now the 6K would now be powered from the Ronin! Not much more to say. 5

Steven	02/07/2024
[0.5 oz / 14.1 g] Because of the large power capacity the Ronin-S holds, plugging my Blackmagic Pocket Cinema Cam 4K (which drains power like no business) directly into my Ronin-S gives me the most sufficient power option to my camera while using it on the Ronin-S. No need for external power which just adds extra weight and could become cumbersome. 5

James	29/06/2024
[0.04 lb] Most solid and stable power source from a battery with d-tap. 5

Thomas	07/06/2024
[0.5 oz / 14.1 g] Works great so far. Used it only a handful of times with no issues so far. With the smallrig cage on the BMPCC 4K it is very hard to remove the power cable, so I am just going to leave it attached and I re-purposed a large carrying case (the Godox AD600 flash case) which allows me to do so. 5