The Tiffen 4x4" CC10R Red Filter for Photographyis a color compensating (or color correction) filter for use when making color balance adjustments. It can be used to alter the color balance of a scene by placing in front of a light source or the lens of your camera. It can also be used to apply color corrections when used in the darkroom with an enlarger or to help pre-visualize color adjustments when viewing prints.

Red is the opposite of cyan and can be used to reduce cyan tones or casts within a scene or print. This red CC10 is more dense than a CC05 filter and less dense than a CC20 filter, and requires a 0.3 stop compensation for normal exposure results.

Tiffen filters are made using ColorCore technology; a process that involves laminating the filter substrate between 2 pieces of optical glass and grinding flat to a tolerance of 1/10,000th of an inch. This filter measures 4 x 4" / 101.6 x 101.6mm.

Color Compensating Filter    Achieve Proper Color Balance    Also for Printing and Viewing Use    ColorCore Technology

Red color compensating filter for use when making color balance adjustments.

Red is the opposite of cyan and is added to reduce cyan tones or color casts within a scene or print.

Related Questions and Answers

Q: 1. Will it fit Hasselblad 60B CF 80mm lens thread?

A: Yes, this is a 60 Bay (for bayonet) mount similar to the original Hasselblad filters. The only difference is in the lower quality of materials that make up the filter; other than that, it mounts and functions just the same.

Q: 2. Can I use the clamp on to a 114mm Xeen Lens?

A: 114mm is the maximum lens diameter that can fit into this matte box.

Q: 3. Can this filter work with a film camera - not video??

A: Yes, the Tiffen 43mm #25 Red filter can work with film cameras.

Q: 4. Will this work with digital as well as film cameras?

A: Yes indeed! Although to work re infrared the digital camera would need to be adjusted to take infrared images.I hope this helps.Baer

Q: 5. Ikan's website says the following Additionally, you get four lens adaptors (72mm, 80mm, 90mm, 114mm) however there is no mention of the 114mm adaptor on B&H. To add to my confusion Ikan state in their specs that the largest lens for matte box is 100mm. Will this mattebox fit on a 114mm lens?

A: Good question. To clarify this, The MB-T05 comes with 2 lens adapters:80mm95mmThe Donut ring measured out to be 110mm. When you remove all accessories, the MB-T05 has a lens diameter of 114mm. So the MB-T05 only has 5 options:Nuns Knickers80mm95mm110mm114mm

Q: 6. How could this be used with digital systems?

A: The Tiffen 72mm Red 23A Filter will work with digital cameras when the camera is set to B&W mode.

Q: 7. Does the filter have inner threads so that I can stack filters?

A: Yes, Tiffen #25 Red Filter (40.5mm) has inner and outer threads allowing you to stack filters.

Q: 8. Who is the manufacturer of the ND? Is it Tilta?

A: Tiffen is the manufacturer of the Tiffen 4 x 4" ND 0.6 Filter (2-Stop) included in the Tilta 4x4" Tilta Lightweight Mattebox with 0.6 ND Filter Kit.

Q: 9. What Nm is this filter? 720? 950? thanks!

A: This filter allows zero light to be passed below 580nm, at 700nm is allows 86.5% to pass.

Q: 10. How does this filter effect skin tones would an orange 23a be better?

A: This filter is designed to effect contrast in B&W photography, it is not recommended for color photography as the entire image would be red.