Tilta Single 15Mm Aluminum Rod 5.91" Anodized Gray Silver

Tilta Single 15mm Aluminum Rod 5.91" Anodized Gray Silver

Product Code: eq68293
Availability: In Stock

$19.50 $27.11

Qty

15 reviews Write a review

Description
Reviews (15)

This Tilta Single 15mm Aluminum Rod 5.91" Anodized Gray Silveris 5.91" in length and anodized gray/silver. It is compatible with 15mm LWS and studio rod support clamps and chamfered to make it easier to slide rod-mounted accessories onto the end.

Single 5.91"-Long 15mm Rod Chamfered

Parameters
Diameter	15 mm
Length	5.91" / 150 mm
Material	Aluminum
Thread Type	No
Number of Rods	1
Packaging Info
Package Weight	0.1 lb
Box Dimensions (LxWxH)	6.75 x 1.2 x 1"

Related Questions and Answers

Q: 1. What is the inside thread pitch of these for connecting another set creating a 24 long rail? Does B&H have a part# for that connector part?

A: Michael, this is an odd situation, The thread pitch is not a standard US or metric pitch. We do not have the exact size so you would need to inquire with Tilta. The connector SKU # is R15-C They have a support portal on their website.

Q: 2. Will this work on the normal RS2 plate?

A: The unit is specifically designed for the Manfrotto extender plate.

Q: 3. What size is the thread?

A: The 15mm rods have a thread of 11mm-1.0.

Q: 4. What is the size of the female thread, 1/4 20?

A: We're afraid this is not 1/4"-20. It is a 1" thread designed specifically to connect rods to each other. Here is Tilta Single Rod Connector for Tilta 15mm Rods B&H # TIR15C that allows you to connect two rods with a female thread. https://bhpho.to/2QYFqP9

Q: 5. is it a ratcheting handle? I actually want to put this on the front of the pictured top cage handle. Would it be possible?

A: Yes, The Tilta 15mm Single Rod Holder for Camera Cage Side features a ratcheting handle that you could reposition by slightly pulling on the handle once tightened.

Q: 6. Will it work with the DZO PICTOR ZOOM LENS on my FS5?

A: Yes. One of my favs to use at this unit allows horizontal / Vertical adjustment for more flexibility.

Q: 7. I want to use this to mount a 15mm rod on a cheese plate. What is the mounting screw? Can the anti-twist pin be removed?

A: The Tilta 15mm Single Rod Holder for Camera Cage Side (Tilta Gray) screw size is 1/4-20. We are not aware that any other parts of this adapter can be removed.

Q: 8. Could this be used with other cages. like mounting the Tilta wireless follow focus onto a Fuji Xt4 with cage? thanks

A: It's a 1/4 20" screw so it should work, but it is especially designed for the Tilta cages.

Q: 9. Does this match with a Canon RF 28-70mm f/2 L USM Lens paired with Tilta Tiltaing Lightweight Camera Support Kit for Canon C70?

A: As long as you place the Tilta 15mm LWS Rod Lens Support in a position that isn't on a focus or zoom gear, it will support as needed.

Q: 10. Will this mount to the right-hand side of the BMPCC4K cage or just the left-hand side?

A: There are multiple anti-twist pins on the Tilta BMPCC 4K Cage. But there is no anti-twist pin on the upper right handle side of the cage.

Tom	14/09/2024
[Aluminum] Was able to move the monitor where I wanted in the rig. 5

Sheryl	04/09/2024
[15 mm] This works well for my purpose. I built a little 3 monitor setup using 3 7" monitors and a 15mm rod. These clamps make attaching the monitors easy, though smallHD uses an incompatible locating pin layout for some reason. It does work with the Atomos layout, thankfully. For the smallHD screens, I just removed the locating pin (easy, using needle nose pliers). I'm not sure why people are mad about the pin, as it's threaded, and removable on all 3 of mine. 5

Robert	18/08/2024
[0.1 lb] If you have BMPCC 6K, Tilta cage, and Nucleus Nano follow focus motor, This little holder is perfect. Less weight is always good for gimbal setups! 5

Gerald	17/08/2024
[6.75 x 1.2 x 1"] I was worried that it would spin because you only see one bolt in the photos, but there is a pin on that back. It fits on the Tilta cage perfectly. I'm using it for a Nucleus Nano. If you need a compact, sturdy way to mount a 15mm rod on the front of your Tilta cage, this is a no brainer. 5

Kindrid	05/08/2024
[6.75 x 1.2 x 1"] Boy does this rod hold things and do rod things! 5

Wesley	04/08/2024
[6.75 x 1.2 x 1"] I recently upgraded my zoom lens on my camera rig, but immediately I saw that I needed to upgrade from my 8'' rails. On paper 8'' v.s. 11.8'' doesn't seem like a ton, but when I put my rig together with these 11.8'' rails, I could IMMEDIATELY see and feel the difference. Having that extra length really makes my rig feel less overpacked, and being able to move the weight around on my rig a little more has been great. I needed the space to hold a v-mount battery plate, camera + rail system, follow focus and still have space for handles, screens and whatnot. This fit the bill perfectly, and I am enjoying the setup! 5

Luis	28/06/2024
[6.75 x 1.2 x 1"] Strong & simple 5

Ian	25/06/2024
[0.1 lb] It allowed me to use the standard cage on my gimbal without the baseplate rods. 5

Dennis	22/06/2024
[6.75 x 1.2 x 1"] Purchased these rods for gh5s camera rig. These rods are nicely machined with tapered ends for easy installation of rail block or other accessories. Also few manufacturers sell 6 inch rods. 5