Save your back with the Easyrig 200N Cinema Flex Vest with Quick Releasefrom Easyrig. Using a suspension line to support a camera rig weighing 8 to 13 lb, this system takes the load off your shoulder, neck, and arm muscles and distributes it across your torso. This lets you shoot for longer periods of time without worrying about arm fatigue. The system consists of a Standard Cinema Flex vest, a 200N shock absorber, and a 5" extended top bar. Also included is a carrying bag for convenient storage and transport of the Easyrig system.

Body-Worn Camera Support System    Reduces Strain on Arms, Neck & Shoulders    200N Shock Absorber    8 to 13 lb Load Capacity    Standard Cinema Flex Vest    Waist Adjustment: 29 to 50"    5" Extended Top Bar    Quick-Release Hook for Fast Setup    3/8"-16 & 1/4"-20 Ball Studs    Carrying Case

• 8 to 13 lb load capacity
• Standard Cinema Flex vest with reinforced upper chest for female operators
• 5" extended arm
• Quick release hook securely holds camera with minimum setup time
• Includes two 3/8"-16 and two 1/4"-20 ball studs that can be fastened to a camera, camera cage, or camera handle
• Vest and waist belt made of breathable material
• Made in Sweden

Related Questions and Answers

Q: 1. Would this unit support a Ux 180?

A: Yes, the Panasonic UX-180 camcorder would and could be supported when using Easyrig Minimax. The Easyrig Minimax has a 4.4 to 15.4 lb Payload Range.

Q: 2. How is the Stabil arm when not using a gimbal? Particularly for run and gun documentary work? Hoping to use it with a fx9 with vmount batteries in future

A: This will be a great option for you Sony FX9 set up. It will release some of the payload of your gear, so it's easier to hold. It wont completely stabilize the image like a gimbal does, but it will help with handheld shots being less shacky.

Q: 3. Can this handle a little extra weight over the recommended allowance?

A: We would advise keeping within the 4.4 to 15.4 lb Payload Range with the Easyrig Minimax STABIL Light Gimbal/Camera Support System. The support rope movement specifically designed for the 4.4 to 15.4 lb payload range.

Q: 4. Will this support a Ronin 4d?

A: The Easyrig Minimax will handle up to 15.4lbs and the DJI Ronin 4D is 10.3 without a lens. You will need to be selective about which lens but it will definitely work for it.

Q: 5. My rig is 15-20lb but trying to avoid $7K so looking at this version. Will it just mean my arms have to carry 5lb?

A: Yes, you would need to be very careful, but the Easyrig Minimax STABIL Light Gimbal/Camera Support System would help you support your payload weight. It is designed to support a 4.4 to 15.4 lb Payload Range and you would need to support the extra weight.

Q: 6. I ordered this Easyrig. It is very handy. But now I need a Stabilizer. I am consider the DJI Ronin SC 2. My camera is the Panasonic Lumix GH5s with a Smallrig cage. Can I attach this camera with the cage to the Ronin SC 2 so that I can attach the quick release ball studs?

A: If you are asking about the compatibility of the quick release system of this stabilizer with that of the DJI Ronin RSC 2, they employ different quick release systems which are, unfortunately, not compatible.

Q: 7. The Specs don't give the weight of the entire System. How heavy is it?

A: The weight of the Easyrig Minimax STABIL Light Gimbal/Camera Support System is 17lbs.

Q: 8. Can this support and function with the FX9 camera?

A: The Easyrig Minimax (B&H# EAMINIMAX) can support and may be used with a Sony PXW-FX9 XDCAM 6K Full-Frame Camera System (Body Only) (B&H# SOPXWFX9). See below: https://bhpho.to/3iLcw96

Q: 9. To mount a DJI RS3 Pro, what additional Hardware is required?

A: We would recommend a gimbal ring when working with the Easyrig Minimax STABIL Light Gimbal/Camera Support System, and the DJI RS3 Pro. Tilta Basic Ring Grip Plus for DJI Ronin BH #TIGAPRG

Q: 10. Does this work with Cranes 3S?

A: Yes it does.