Intended for guitarists, the BOSS OD-200 is a drive and distortion pedal offering many familiar BOSS tones in a relatively compact footprint. The pedal offers 12 different types of distortion  from overdrive to metal tones to contoured drive. You can control these effects with a three-knob tone stack, level, and drive knobs. You'll also note a Parameter knob, whose function changes depending on the effect you select.

In addition to the 12 distortions, there are 15 switchable boost types. You can place the effect in parallel or in series. With series, you can fashion stacked drives, complete with post-gain level controls. In parallel, you can achieve side-by-side blends, which can result in eccentric tones. 

The effects provided herein are achieved by means of a 96 kHz, 32-bit signal path to achieve a high-quality sound in every instance. The bypass path is buffered to preserve your tone, even across long cable runs. There are four memory slots provided to save combinations of parameters and recall them when you desire. 

 A control/expression input allows you to continuously control parameters using a separately available expression pedal. It also works as a control input for external switches. MIDI connectivity is possible via two 3.5mm jacks for the input and output.

The pedal can be powered by three supplied AA batteries. Alternatively, you can purchase a separately available power supply.

12 Drives and Distortions    15 Switchable Boost Circuits    96 kHz / 32-Bit Signal Path    Level, Drive & Parameter Knobs    Low, Middle, High Knob    4 Memory Slots for Recall    Buffered Bypass    Insert Section for Pre-/Post-Processing    Tight Gate for Eliminating Noise    AC Adapter Available Separately

• Hybrid design with analog and digital circuitry for a huge range of drive tones 
• 12 primary drive modes plus 15 boost types with independent pre/post gain controls
• Selectable series or parallel boost structures for gain shaping
• Advanced gate section for eliminating noise and tightening high-gain tones
• 32-bit AD/DA, 32-bit floating point processing, and 96 kHz sampling rate
• Real-time panel setting and four memories for storing favorite sounds
• Panel Lock function disables controls to prevent unwanted changes
• Customizable multifunction footswitches for bypass, boost, memory selection, and more
• Support for expanded control via external footswitches, an expression pedal, or MIDI
• Full MIDI I/O provided with mini TRS jacks (BMIDI-5-35 adaptor cable available separately)
• Micro-USB jack for firmware updates
• Runs on PSA-series AC adapter or three AA-size batteries

Related Questions and Answers

Q: 1. What is the difference between the Roadie Hybrid Roller and the Roadie Roller? Both seem to have backpack shoulder straps.

A: According to the manufacturer, the Tenba Roadie Hybrid Roller 21 has a Fast-Deploying Backpack Harness which allows the Roadie to be carried comfortably when the terrain is not "wheel friendly," such as on stairs or over sand or dirt. The Fast-Deploying Backpack Harness is not listed as included with the Tenba Roadie Roller 21. The Tenba Roadie Roller 21, B&H # TERR21B, instead has a Quick Access Battery Pocket, which is a rear zippered pocket that can hold most common portable batteries for charging mobile phones and other portable devices. Twin zippers allow cables to be easily threaded out of the pocket. The interior of the Tenba Roadie Hybrid Roller 21 is slightly deeper. The interior dimensions of the Tenba Roadie Roller 21 are 12W x 17H x 6.25-7.75D in. (30W x 43H x 15.8-19.6D cm), whereas the interior dimensions of the Tenba Roadie Hybrid Roller 21 are 12W x 17H x 6-7D in. (30W x 43H x 15.2-17.7D cm). That being said, both cases appear to have identical exterior dimensions, and all other specifications are identical.

Q: 2. If you have had the bag for a year or more how has the telescoping handle held up? I have heard complaints that it is very cheap?

A: Typically the handle holds up fine over time.

Q: 3. how many "longer center channel dividers" come with? thanks!

A: There are two long center dividers but they do not run the full length of the case.

Q: 4. will this hold slides with metal and or plastic sleeve mounts ?

A: As long as the outside dimensions of the slides are not larger than 2 inches by 2 inches, the Logan box will accommodate cardboard, plastic or metal mounts. I use Logan boxes to store all three of these slide types.

Q: 5. Is there a stand for this speaker?

A: Hello, The OD-11 wireless cloud speaker is designed to be on the floor. It also sounds best placed near a wall.

Q: 6. Is there one for left handed people?

A: Not at this time. We do have the Double Breathe strap that is designed to be used with both the right and left hands. In regards to a single camera strap, we do offer the Sport Left Breathe, Classic Retro RS-4 and the Cross Shot Breathe strap.

Q: 7. What is the advantage of this model vs the chest harness model that puts both cameras supported by both shoulders...which is more comfortable?

A: The BlackRapid Hybrid strap is simpler. However, the Black Rapid Double or Double Slim Harness will have better weight distribution for two similar-weight cameras, and may handle heavier cameras more comfortably. In addition, both Double Harness versions, Slim and regular, can detach to be come two independent camera straps, whereas the Hybrid model can only be one strap once the additional camera webbing is detached. Hope this helps.

Q: 8. Is one allowed to connect Boss BR-80 to a guitar amplifier, and how to do it? Via line out? Is it the way to monitor the recordings etc. (besides having the earphones)? Or is it better to connect it to a home hi fi stereo set and how?

A: Connect the Boss MICRO BR BR-80 to the amp via its line input and monitor via the BR-80's Headphone out with headphones or connect powered speakers or a home AV receiver to its LINE output.

Q: 9. Is this unit have battery power for places where ac is not available? If not, do you have a unit that is comparable by battery-powered?

A: No, the Acoustic Singer Live LT operates using AC power only. It does not have an option for battery power. We do have many options for amplifiers to use with instruments and microphones that have both battery and AC power options such as the Bose S1 Pro Multi-Position PA System with Bluetooth and Battery Pack (B&H # BOS1PSWB), Behringer Europort MPA40BT-PRO All-in-One 40W Portable Bluetooth PA System with Rechargeable Battery (B&H # BEMPA40BTPRO), and JBL EON ONE PRO All-in-One Rechargeable Linear Array PA System (B&H # JBEONONEPRO), just to give you a better idea. Please feel free to contact us by phone or through live chat on the website and we can help you to find the best amplifier or your application.

Q: 10. Can I use this with the Roland AX Edge? Is is 100% compatible?

A: Yes it will work with the Roland ax edge, or any audio gear with 1/4 trs output.