The BOSS WL-60 Wireless System for Electric Guitars and Bassesfrom BOSS WL-60 Wireless System for Electric Guitars and Bassesis a wireless system for electric guitarists and bassists. Its form factor consists of a bodypack transmitter that clips to your belt and is where you plug your instrument. The receiver is the size of a small stompbox and sits on your pedalboard. You can plug the receiver into the first pedal of your chain.

The system automatically scans 14 channels for the strongest signal, and you're good to go. Now you can walk across the stage and not worry about dragging all your gear behind you. Latency is as low as 2.3 ms, and the system gives you a 20 Hz to 20 kHz frequency response to ensure none of your tone is lost in the wireless world.

The transmitter and receiver both accept battery power, though the receiver also sports an input for a separately available AC adapter. Should you power the receiver from an adapter, you can daisy-chain power to another pedal from the DC output. 

For Guitar & Bass Players    Bodypack Transmitter    Pedalboard Receiver    Up to 14 Compatible Channels    65' Transmission Range, Line-of-Sight    20 Hz to 20 kHz Frequency Response    Battery Powered via AA Batteries    Power Pedals from Receiver's DC Output

• Powered by BOSS proprietary wireless technology
• Automatic 14-channel scanning makes setup quick and uncomplicated
• Large LCD shows channel status, wireless strength, battery life, and more
• Stompbox-size receiver fits easily on your pedalboard
• Bodypack transmitter works with nearly any instrument and runs for up to 25 hours on two AA alkaline batteries
• 65' line-of-sight transmission range 
• Short cable included for connecting the transmitter to a guitar or bass
• Receiver powered by AC adapter (separately available) or the included two AA alkaline batteries
• Convenient DC output on the receiver for powering other pedals (when using AC adapter)
• Instrument input for using a standard cable without removing the receiver from a pedalboard
• Included WL-60T Transmitters also available separately for backup and outfitting additional stage instruments

Related Questions and Answers

Q: 1. Do 2 dishes come in a pair for the purchase of $399? Do they include the alignment tool you can use your eye to align them much easier???

A: Only one Wireless Bridge is included with the Precision Alignment Pole Mount.

Q: 2. Load capacity is between 16KG to 75KG. What does that mean? Will it take my Sony Venice with a Leica Summilux, on its rig and raw recorder, one monitor etc.?

A: This has a load capacity between 35 to 145 lb or 16 to 65 kg. You will need to weigh out your gear to see if it works within that capacity.

Q: 3. Can I use this together with Boss Waza Air?

A: The Waza-Air includes the same WL-T wireless transmitter as the WL-20L wireless system. The transmitter will work with the built-in receiver on the Waza-Air headphones and the WL-20L system's receiver.

Q: 4. Is it compatible With Roland V-1HD Switcher?

A: Unfortunately, we can not confirm compatibility of the Hollyland Wireless Tally System (4 Tally Lights) with the Roland V1-HD. However, another solution that does work is the following system from Cerevo. Cerevo FlexTally Wireless Tally Lamp System BH #CECDPFT01B • MFR #CDP-FT01B. Compatibility chart: https://bhpho.to/3zdNYxm

Q: 5. Does this pad cause any interference with wireless headphones?

A: This item should not cause interference with wireless headphones.

Q: 6. Do I also need a Plantronics APD-80 Electronic Hookswitch cable to make this headset work with my Landmark 416 multiline phone which has an RJ9 jack for a headset?

A: Yes, the Plantronics APD-80 EHS cable is required.

Q: 7. Is this compatible with the Osee Gostream Duet?

A: At this time Hollyland does not state that the Hollyland Wireless Tally System (4 Tally Lights) is compatible with the OSEE GoStream Duet SDI/HDMI/NDI|HX Live Stream Video Mixer/Switcher/Recorder.

Q: 8. Can I use this with the Roland AX Edge? Is is 100% compatible?

A: Yes it will work with the Roland ax edge, or any audio gear with 1/4 trs output.

Q: 9. Does this work with Blackmagic switchers?

A: Yes, the Hollyland Wireless Tally System (8 Tally Lights) will work with Blackmagic Atem switchers using RJ-45 network cable.

Q: 10. Does this come with the headband and the regular ear piece?

A: Yes, it comes with the wire headband and multiple size ear pieces, as options. It's a great headset.