Audix M3Gdk Tri-Element Ceiling Microphone Kit Gray

Audix M3gdk Tri-element Ceiling Microphone Kit Gray

Product Code: eq68536
Availability: In Stock

$6,009.00 $7,871.79

Qty

11 reviews Write a review

Description
Reviews (11)

The Audix M3GDK Tri-Element Ceiling Microphone Kit Grayfrom Audix M3GDK Tri-Element Ceiling Microphone Kit Grayis the heart of a microphone system that offers audio performance through Ethernet networks. It can be used to provide microphone functions including on-off contact closure and LED status indicators for meeting rooms, convention centers, educational facilities, and houses of worship through a single Cat 5 - Cat 7 cable with RJ45 connections.

The DN43 interface features one port for the Audix M3 tri-element microphone and one port for Audix RJ45-equipped single-element microphones. The configuration eliminates wiring errors and accelerates installation. In addition, all Audix RJ45-equipped microphone gain structures are optimized for their intended placement, which provides quality audio at the DSP. The result is true plug-and-play installation.

Furthermore, the interface is equipped with two 5V logic outputs per port and source/sink capability for LEDs that are controlled by network-connected DSPs. Low-pass and high-pass filter settings are available for each audio channel as well as eight selectable gain levels with all settings configurable via software.

M3 Tri-Element Hanging Ceiling Mic DN43 Dante AES67 Mic System Interface 100% RF Shielding Low Self-Noise Frequency and Pattern Tailored for Voice TAA Compliant Includes 3' Plenum-Rated Cable 2 x Seismic and Fire Cable Restraints

Parameters
Mic Input	Balanced, RFI Filtered 1 x Tri-Element Mic Port, 1 x RJ45 Port
Mic Input Connector	Shielded 8P8C, RJ45
Phantom Power	48 VDC, 14 mA/Port (Short-Circuit Protected)
Max Input	-14 dBu, 155 mV (0 dB Gain)
Input Impedance	1.15 kOhms (Balanced)
Frequency Response	15 Hz to 22 kHz, +0, -3 dB
THD+N	0.003% (1 kHz, 0 dB Gain)
CMRR	50 dB
EIN	-120 dBu (Unweighted)
SNR	-96 dB (Unweighted)
Channel Crosstalk	<-80 dB (1 kHz)
Dante / AES67 Channels	4
Chipset	Dante: UXT-01-004
Sample Rate	48 kHz
Word Width	24-Bit
Logic Input	Logic Inputs Per Port: 1 x Per Single-Element Microphone Port Logic Outputs Per Port: 2 x
Low-Pass Frequency	Off, 5 kHz, 7 kHz, 10 kHz
High-Pass Filter	15 Hz, 238 Hz
Gain Options	0 / +8 / +12 / +15 / +18 / +24 / 30 / and +36 dB
Power	External DC Jack: +48 VDC, 125 mA PoE (IEEE 802.3af: Class 2 (3.84 to 6.49 W)
Temperature (Operating)	50 to 122°F / 10 to 50°C
Dimensions	1.1 x 8.0 x 4.9" / 2.8 x 20.2 x 12.5 cm
Weight	1.39 lb / 0.63 kg
Packaging Info
Package Weight	2.12 lb
Box Dimensions (LxWxH)	9.7 x 5.7 x 3.8"

Supports AES67 audio streams
Dante Domain Manager (DDM) ready
Dynamic or static IP address
Evaluated to the requirement of UL2043 and is suitable for use in above-ceiling applications

PoE from any IEEE 802.3af compliant equipment

Two 5V logic outputs per port, with source/sink capability for LEDs controlled by network-connected DSPs
One logic input per single-element microphone port for buttons

Related Questions and Answers

Q: 1. When using all the panels together, do you need 4 separate USB plugged in? Or when connected, does one USB handle all the panels?

A: You need to use a USB for each panel. You will need to purchase a USB hub(one with its own power cord). Just plug all the USB plugs into the hub and connect the hub to your computer. BH has those hubs in stock.

Q: 2. Will this work with any mic with a mini-XLR connector, or only with Audix? Thanks.

A: Yes, the Audix MicroBoom 84 Carbon Fiber 84" Boom can be use with any microphone that has a mini-XLR connector. The MicroBoom 84 has a mini-XLR female connector on the top to attach the mic and terminates with a mini-XLR male connector at the bottom. The MicroBoom attaches to any microphone stand and can be used horizontally or vertically.

Q: 3. What's a good, powered USB hub to go with the Tangent Element? So that the whole USB bus still runs smoothly (lots of external devices plugged in)

A: We can suggest this one: Xcellon 4-Port Powered USB 3.0 Aluminum Hub (Black) B&H # XCUSB4PHV2.

Q: 4. IS this USB 2.0 or 1.1 ?

A: The Audix USB12 requires a USB2.0 connection or higher for proper operation.

Q: 5. To synch sound to footage shot on a Canon DSLR would this mic work via a zoom recorder?

A: The Audix SCX1/HC Studio Condenser Microphone Kit is a good option for recording audio separately into a Zoom recorder. Sync will likely have to be done manually in editing as most DSLR cameras and some Zoom models do not offer timecode onboard. It is possible to record timecode as an audio track on each device, which can be decoded by certain editing softwares for sync, if you use a device such as the Tentacle Sync E mkII Timecode Generator with Bluetooth 5.0 to feed both the camera and recorder the same timecode: https://bhpho.to/3Lj6m8W

Q: 6. can anyone tell the dimensions of the panels together?

A: The width of the full bundle is 30in (77cm) and the depth 8in (20cm) If you need more details then visit the Element product page of the Tangent website https://www.tangentwave.co.uk/products/#element and click on the Specs tab - all the dimensions for each panel are listed there.

Q: 7. Is this system 100% compatible with Da Vinci Resolve 16 on Windows 10 PC and does anyone know if it 100% compatible with Da Vinci 17??

A: Yes it will work on Windows, and yes it will work with DaVinci 17.

Q: 8. Country of origin of the tangent panel Kit-dr asok

A: All Tangent panels are manufactured in the UK so have a Country of Origin specified as the UK.

Q: 9. Does it work in the ATR 3350 Audio technica?

A: I'm afraid not. That clip is designed to hold the mic itself the ADX10 is 10 mm in diameter. The ATR 3350 is 8 mm in diameter. Not a good fit. Try a B&H link toa href= http://www.bhphotovideo.com/c/product/885752-REG/auray_tc_olm10_tie_clips_for_olm_10.html/pageID/accessory target= _blank http://www.bhphotovideo.com/c/product/885752-REG/auray_tc_olm10_tie_clips_for_olm_10.html/pageID/accessory/aThis clip will hold the cable as opposed to the entire mic. Should fit fine.

Q: 10. How long is the XLR Cable that's included in the package?

A: The Mackie EM-89D EleMent Series Dynamic Vocal Microphone includes a 10 foot XLR cable.

Bryce	29/08/2024
[4] The D-6 is such a good Mic for the Kick drum and is very easy to make sound good with very little Eqing. Hard to beat for the money 5

F. Tariq	28/08/2024
[24-Bit] I watched many microphone reviews and shootouts, many drummers and engineers recommended it. I had the opportunity to purchase less expensive mics new and used but I purchased the Audix D6 and I am SUPER PLEASED at the sound. Not muddy but has great low end and has that punch! U need this in your life! 5

Ron M	23/08/2024
[2.12 lb] Well, it doesn't look that great in the pictures, does it ? Indeed, I doubt it would have occurred to me to BUY one, until TWO of them arrived over a year ago as part of my superb Audix SCX25A matched pair piano miking kit. From that moment on, I found myself constantly reaching for them (rather than my vast inventory of other clamps) whenever the need arose to mount all sorts of things in all sorts of less conventional places. That they're fabulous for mics is a given, but these clamps are ALSO unmatched, in my long experience, for the secure clamping of more exotic things, such as mini cams and wireless mic antennae. Perhaps the best testimony I can give in terms of just HOW useful they've been (and what good value for money they represent) is me telling you that I now own a total of six. 5

Robert	22/08/2024
[15 Hz, 238 Hz] This is a great addition to an existing Dante system. Installation is easy, just need a 2 hole in the ceiling tile and connect CAT6 cable with RJ45. The unit is smaller than anticipated, but the microphone is super sensitive and picks up the entire board room with clarity. The plug-and-play capability of the Dante system and interface is also nice, as it provides power to up to 4 connected devices. A single ceiling mic and interface connected to our existing network has replaced the need to set up table-top mics and a multi-channel mizer and removed the worry about users accidentally muting their mics during a meeting. With some additional Dante interface devices, users can easily connect over our network to ceiling mics with ease. A point of advice for those new to Dante, be sure you are comfortable with the environment requirements, they might seem overwhelming at first, but they are easy to build out and work with existing network infrastructure. 5

anyonymous	14/08/2024
[4] Sounds good for the money 5

anyonymous	14/08/2024
[4] Sounds good for the money 5

Brian	02/08/2024
[48 kHz] Great Vocal mic, studio sound in live situation. Rarely have to do much EQing with this mic, very transparent. 5

Brian	02/08/2024
[48 kHz] Great Vocal mic, studio sound in live situation. Rarely have to do much EQing with this mic, very transparent. 5

Miles	24/06/2024
[50 dB] Sturdy as advertised, low profile, quick and easy to mount, move and take off. Mine came with a heavy plastic mic clip unlike the thinner kind (which can break easy) as pictured. The only problem with these clips is once you have everything in place and wired it is difficult to adjust the height of the mic. It's easiest to un-patch the XLR then readjust the height. Otherwise, a really great mount for your D series mics. 5

Guma	01/06/2024
[<-80 dB (1 kHz)] I have been a sound engineer for about 30 years. I have used all the kickdrum mikes in the marked that is worth to mention.When I first discovered the D6 a couple of years ago I knew this is it. This is the mike I have been looking for all these years. Its no longer needed to use two mikes for the kick as I used to, one for the deep and one for the click.This mike got both. I use it both in the studio and live.Its a hit. 5