Vivitar T-Mount To Micro Four Thirds Adapter

Vivitar T-mount To Micro Four Thirds Adapter

Product Code: eq68648
Availability: In Stock

$38.85 $54.39

Qty

17 reviews Write a review

Description
Reviews (17)

This Vivitar T-Mount to Micro Four Thirds Adapterallows you to mount T-mount lenses, telescopes, microscopes, or other optics to your Micro Four Thirds-mount camera body. When in use, automatic camera functions, such as autofocus and exposure control, will not be available and must be set manually.

Adapts T-Mount Optics for Use on Micro Four Thirds-Mount Cameras

Parameters
Camera Mount	Micro Four Thirds
Lens Mount	T-Mount
Electronic Communication	No
Packaging Info
Package Weight	0.155 lb
Box Dimensions (LxWxH)	3.8 x 3 x 1.7"

Related Questions and Answers

Q: 1. will this work with Voigtlander Nokton 40mm f/1.4 Lens (Single Coated) on a Sony A7

A: The Vello Leica M Lens to Micro 4/3 Camera adapter would not be compatible with the Sony a7. The Sony a7 has the Sony E mount, which is different than the micro 4/3 mount. To use the Voigtlander Nokton 40mm f/1.4 on the a7, you could any of the adapters on the following link. http://bhpho.to/1gaBPW9

Q: 2. What is the outer diameter at the t-mount end of this adapter?

A: Mine is 54.7mm, just shy of 55mm. I just measured it with calipers.

Q: 3. Will this adapter work to mount a L39 lens (such as an old Leica LTM lens to my Olympus OMD M1Mk2? Or will it place lens too close to sensor? I thinking of the 5cm Leica Summacron or the 3.5cm Summaron

A: Yes it will.

Q: 4. Where is this manufactured?

A: This adapter is manufactured in China.

Q: 5. Can this adaptor be used on a BlackMagic Pocket cinema camera?

A: Yes. The Metabones C-Mount Lens to Micro Four Thirds Mount Adapter can be attached to the Black Magic Pocket Camera, since it uses a micro 4/3 connection.

Q: 6. Will this adapter work with the Blackmagic Cinema Camera MFT mount?

A: Worked perfectly. Easily the most finely manufactured adapter I've encountered. Highly recommended.

Q: 7. How this adapter work with GH4 Lumix?

A: yes. magnificent workmanship compared to cheaper brands plus infinity focus on switar 10f16.

Q: 8. Will summilux lenses work on this adapter? I've a 24mm summilux.

A: This adapter is for using M-mount lenses on a Micro Four Thirds camera (like the Lumix). As the 24mm Summilux is an M-mount lens, it should work with no problem.

Q: 9. I'd like to try some old lenses (from my Minolta XG1 SLR System) on my BMPCC4k. One of the lenses I'd like to try says "M/MD" on the mount. Will this adapter do the trick to connect this lens to my BMPCC?

A: Sorry the m sreies refers to Voigtlander, Leica, and other M-series lens, not to Minolta slr lenses.

Q: 10. Will this work with the Blackmagic micro cinema camera & blackmagic pocket cinema camera 4k?

A: Yes, the Voigtlander Micro Four Thirds to M Lens Mount Adapter, B&H # VOMA43M, would be compatible for use with the Blackmagic Design Micro Cinema Camera. Do note that this is a fully manual adapter and there are no electronics to transfer information from the lens to the camera, so you would have to focus manually, as well as set the aperture on the lens. Because there are no electronic couplings built into the unit, exposures are only possible in manual or aperture priority mode. on

Thomas	24/09/2024
[0.155 lb] Solid connection with my 500mm mirror lens on my Panasonic G2. Just a good piece of gear 5

sdennis	17/09/2024
[3.8 x 3 x 1.7"] Very sturdy, simple, and efficient. I've used this with my Voigtlnader Heliar 15mm and my Leica Summilux lens on my Olympus EP1 and it works perfectly. 5

Charles	11/09/2024
[0.155 lb] The documentation is a little lacking but I managed to figure it out. This connects to my Panasonic G85 just like any MFT lens. The adapter and lens screw right on to the Novagrade T-Mount I got. Now I can use my Vortex Razor HD as a very long lens. I now need to get a couple of covers for the camera body and the lens to keep dust out. 5

vicesupremeoverlord	08/09/2024
[3.8 x 3 x 1.7"] Setting my Panasonic to aperture priority, I can now use a beautiful Leitz lens. Focusing is manual but the center focusing-aid window I can turn on gives much better focusing ability than the match-image of rangefinders or the ground glass image of reflex cameras. Much sharper focus plus the quality of the Leitz image. The precision of the Voigtlander adapter makes me want to replace the other adapters I bought with more Voigtlanders. The Nikkor to M4/3 lens adapter of another brand is especially sloppy - I can't wait to use my great Nikkors with a precision Voigtlander. 5

Capt Skip	05/09/2024
[3.8 x 3 x 1.7"] This adapter is very well manufactured and works perfectly to allow my spotting scope to act as a long range lens. On our recent trip to Costa Rica it allowed me to take some amazing pictures I would not have been able to capture. I highly recommend this adapter to everyone. 5

Capt Skip	05/09/2024
[3.8 x 3 x 1.7"] This adapter is very well manufactured and works perfectly to allow my spotting scope to act as a long range lens. On our recent trip to Costa Rica it allowed me to take some amazing pictures I would not have been able to capture. I highly recommend this adapter to everyone. 5

Lesleyanne	24/08/2024
[3.8 x 3 x 1.7"] It fits my Celestron Firstscope and Olympus OM-D E-M5 Mark II perfectly. Solid construction. 5

Walter	07/08/2024
[3.8 x 3 x 1.7"] Does the job exactly like the more expensive brands. 5

John	06/08/2024
[0.155 lb] I have a YI mirrorless camera. I wanted to attach it to a telescope for astronomy pictures. This fit the camera and the telescope barlow lens perfectly. 5

Mark	06/08/2024
[3.8 x 3 x 1.7"] Does what it does very well! I use it to attach my EM 1.2 to a 2” t-mount extension tube on my refractor telescope. Built well, nice finish and most important, good fit at BOTH ends- No extra movement at the MFT mounting side. 5