The 10" Balanced 3-Pin XLR Female to 3-Pin LEMO Adapter Cable from Ambient Recording can be used with to feed a balanced signal to the input of a compatible component, such as a wireless audio transmitter.

10" Balanced Cable    Locking 3-Pin LEMO Connector

Related Questions and Answers

Q: 1. Can I use the VXLR Pro to connect a Roland CS-10EM Binaural Mic to XLR connectors capable of supplying phantom power?

A: Yes you can use the Roland CS-10EM with the Rode VXLR Pro.

Q: 2. Does this convert an unbalanced signal into a balanced signal?

A: Yes it does.

Q: 3. Will this work with my Zoom H5 and Saramonic WM2100 Lav mics?

A: Yes, the Rode VXLR Pro Transformer-Balanced 3.5mm TRS Female to XLR Male Adapter with Phantom-Power Converter can be used to make a hardwired connection between the lavalier microphones included in the Saramonic SR-WM2100 2-Person Camera-Mount Digital Wireless Omni Lavalier Microphone System and the Zoom H5 Portable Handy Recorder. The VXLR Pro will properly convert phantom power from the H5's XLR inputs down to the plug-in power voltage required by the lavaliers.

Q: 4. Would this work for a Sennheiser mic k6/me66 to Sony PCM M10 and give balanced output to both L&R ?

A: Im afraid this will not work at all for what you want to do. As its the other way round. The 3.5mm is the input and the XLR is the mic level output. This would be used in a live situation for example where you may have a device that has a 3.5mm output which you plug in the Switchcraft 318 input. Now you can plug the XLR output of the Switchcraft 318 into a snake or stage box to go into the house mixer at mic level.

Q: 5. Will this allow me to connect my 3.5mm lav microphones to the XLR ports on either a Tascam DR-40x or Zoom H5 or H6 ?

A: The Switchcraft 318 is for connecting a line out 1/8'' source to an XLR mic input. For an 1/8'' microphone that is battery powered, it would be more ideal to use a Kopul mini to XLR adapter (B&H # KOAXMMF). https://www.bhphotovideo.com/c/product/985832-REG/kopul_a_xmmf_adapter_xlr_male.html If you are using an 1/8'' microphone that is not battery powered and instead uses mic plugin power, then you would use the Rode VXLR Plus adapter with the phantom power on your DR-40X or H5 or H6 turned on (B&H # ROVXLRP). https://www.bhphotovideo.com/c/product/1358231-REG/rode_vxlr_mini_jack_to_xlr_adaptor.html

Q: 6. Will this work to connect a Deity V.Lav mic to the XLR input on a Zoom H6?

A: Yes it wll.

Q: 7. SO I can use this cable to go from an SM58 to my cell phone?

A: No. Look at irig products by ikmultimedia.

Q: 8. Does B&H sell a locking make 3.5trs to non-locking 3.5trs short cable, as this will be ideal for connecting this adapter to my preferred mic and maximizing connection integrity, at least on the adapter side. Thank you.

A: No. A locking 3.5mm male TRS to a "non-locking" 3.5mm female TRS would be as special order, made to order from a specialty shop, such as Whirlwind. B&H could order for you$$.....

Q: 9. Hi it says it is for Red and Alexa but could it work on a ZCAM E2-S6? Thank you.

A: The connection on the Z-Cam E2-S6 is 5-pin lemo.. We can only confirm that the adapter has been tested with the RED cameras listed. However, the DigitalFoto Solution Limited 00B 5-Pin LEMO to Dual 3-Pin XLR Female Adapter with Audio Cable should work with the Z-Cam E2-S6 as well.

Q: 10. I want to run my iPhone to our church sound system. Can I use a lightning to 1/8" adaptor and then the Switchcraft 318 to go to xlr and get a good signal?

A: Yes, the Switchcraft AudioStix Stereo 3.5mm Female to Balanced Mono XLR Male Adapter is a good solution for converting a stereo 3.5mm signal connection from an iPhone to mono XLR output for connection to a sound system.