This Novoflex BALPRO 1 Mamiya 645 Adapter Ringallows you to attach a Mamiya 645-mount medium format camera to a Novoflex BALPRO 1 Mamiya 645 Adapter RingBALPRO 1 or BALPRO T/S Bellows. This is a simple manual interface that attaches the bellows system to the camera's bayonet for use.

Connects Camera with Mamiya 645 Mount to BALPRO Bellows

Related Questions and Answers

Q: 1. Hi, does this adapter fit on the sony A7r?thanks

A: The FotodioX Mamiya 645 Lens to Sony NEX is compatible with the a7R, yes.

Q: 2. Mamiya 645 Lens covers the full frame on the A7S II with this adapter?

A: Hi Dave,I did some tests on the A7R; A-900; Nikon D700. As you know - all of these are FF. The Mamiya 645 with this adapter covers approx. 156% of the sensor. You will experience ZERO light fall-off, even when fully stopped down (at highest f-stop). Mamiya 645 lenses are fantastic - so enjoy - it opens up a totally new world of excellence. If I may - just one word of sound advice. Due to the resolving power of the lens, and the high pixel density of the sensor, I advise that ALL shots with 645 lenses are done using a sturdy tripod. Even at high speeds, getting a pin sharp photo is VERY challenging. During 2015, I've done approx. 12000 shots with my 645's, with in excess of 90% on tripod. Of these, the rejection rate is approx. 7%.Kind regardsJohannes van GraanCenturionSouth Africa

Q: 3. Does this work with the A7II?

A: I use this with an A7R and several Mamiya lenses, they work great. Just remember auto focus and auto aperture do not work, you must use manual mode. You can use aperture priority mode if you want the camera to set both ISO and Shutter speed. Use Peaking Level to assist with focus, may need to keep the aperture open to get light to focus. Also set Zebra on to help with exposure. Fit of the adapter to both lens and body has been snug with no movement or wiggle. I plan to add several more used Mamiya lenses

Q: 4. Hi, does it work with m645 mount Phase One/Schneider lens? Thanks

A: The following unit accommodate a camera mount FUJIFILM G lens mount to mamiya 645 camera body.

Q: 5. Wil this work on the Canon 6D? If not is there any adapter which will allow me to use Mamiya 645 lenses on the Canon 6D?

A: Yes, this adapter would work on the Canon 6D as well as other Canon EOS digital or film SLR cameras.

Q: 6. Hi, I purchased the Balpro and the FUGPRO adaptor. I now need a adaptor on the lens side. I have a Fujifilm GF 63mm lens, what adaptor would I need to get?

A: Unfortunately they do not currently make an adapter for the FUJIFILM G Mount lenses.

Q: 7. Does this adaptor work with newer Phase One lens like the 80mm leaf shutter ? I have an adaptor but only takes the old manual lens I have a new Hartblei 45mm TS which is full manual but has the newer mount flange. Any help would be great as Fotodiox don't come back to me on this question.

A: Hello Lea,Unfortunately, I cannot tell you if it works with Phase One lens. I have only old manuals lens. It works well with them.

Q: 8. This adapter works on ARRI ALEXA Classic?

A: Yes, if your Arri Alexa Classis has a PL lens mount, the KIPON Baveyes M645-PL 0.7x Adapter will work with your camera model.

Q: 9. Will this adapter works with the Sony PXW FS7?

A: It works perfectly of my FS5 so I would say it will work perfectly on a FS7. :-) Naturally only with manual focus and manual iris.

Q: 10. can used be Hasselblad CF lens ?

A: Yes Novoflex BALPRO 1 Universal Bellows can be used with Hasselblad CF lenses with this adapter: https://www.bhphotovideo.com/c/product/269742-REG/Novoflex_PROHA_Balpro_1_Adapter_for.html