The titanium MeFOTO GlobeTrotter Aluminum Travel Tripod Kit Titaniumoffers a sturdy, compact aluminum alloy tripod that extends to 64.2", supports up to 26.4 lb, and folds down to just over 16". The GlobeTrotter is actually two camera supports in one: a foam-cushioned, removable leg attaches to the center column to convert to full size monopod.

The tripod's legs can be spread independently with two-position leg angle stops. A spring-loaded hook is located in a recess at the bottom of the center column, allowing you to hang a heavy object from it for additional stability.

The ball head offers separate head and pan locks, a 360° pan index, and an integral bubble level. An Arca-Swiss style quick release plate with a 1/4"-20 camera screw is included in the kit, along with a durable carry case with a shoulder strap for storage and transport.

Load Capacity: 26.4 lb    Max Height: 64.2"    Min Height: 16.1"    Folded Length: 16.1"    Leg Sections: 5    Weight: 4.6 lb    Converts to Monopod    Arca-Type Compatible Ball Head    Separate Head and Pan Lock    Carrying Case with Strap Included

The MeFoto GlobeTrotter has 5 leg sections and extends to over 5.0'

Weighs 4.6 lb yet strong enough to support a full-sized DSLR. It's an ideal choice mirrorless cameras as well

The removable leg and center column combine to make a full size monopod without tools

The tripod legs can be inverted and folded back 180°. At only 16.1" when folded, this travel friendly tripod can fit inside a backpack or suitcase

For an extra measure of flexibility, tripod legs can be independently locked into place at two different angles to enable shooting in cramped quarters, on uneven terrain or at low camera angles

Provides comfort and safety during long-term use

Uses the same twist-lock system as the legs for fast setup

A spring loaded recessed hook, located in the bottom of the center column, allows you to hang a heavy object from the tripod's center of gravity for increased stability

For a compact design and a wide range of height adjustments

MeFoto's rubberized locking grips combined with anti-rotation legs enable fast and fumble-free setup plus weather and dust resistance

Dual-action heavy duty ball head with Arca-Swiss style compatible quick release plate

Accurate panoramas can be easily accomplished using the graduated panning scale for accurate image alignment

Individual locking knobs make adjustments easy

The bubble level allows you to make accurate adjustments for seamless panoramas

Each MeFoto tripod comes with its own carrying case for transport and protection

Related Questions and Answers

Q: 1. Trying to find a solid tripod for my Pentax 645z without breaking the bank. Is this tripod up for the task of supporting a medium format camera?

A: I use a Nikon D800 with a battery grip and a 70-200 and it's very stable.

Q: 2. I intend to use this with a Nikon D750 with battery pack and Tamron 150-600mm G2 lens. Will it support the weight of this setup?

A: I used it on my Nikon D800e/Nikon 70mm-200mm/f2.8 combo and battery pack with two legs fully extended on flat surface. It seems to do just fine. However, I wouldn't recommend using under any windy conditions, unless weight are add it. Hope this help.

Q: 3. Can I use this tripod with a Nikon MC-DC2 Remote Release Cord or will the quick release plate get in the way?

A: You can use it with no issue

Q: 4. One of the legs came off and I cannot seem to Reattach it. Any advice?

A: You can call and ask for Chris Kellogg a href= http://www.mefoto.com/support#ServicingYourMeFOTO target= _blank http://www.mefoto.com/support#ServicingYourMeFOTO/a

Q: 5. Any suggestions to add extra safety, so my camera with my heavy 400mm, pointing straight up? It makes me very nervous with only a plate holding the weight, I fear it will all slip off and crash to the ground

A: The Arca-Swiss type mounting plate system used on this tripod has a built-in slip prevention feature built into it. If the knob that tightens the plate to the ball head becomes loose enough to allow the plate to slip, it will only slip about a half inch or so before being stopped by this feature. If the knob loosens further, then the plate can be released altogether. However, you might want to consider getting a larger tripod with a wider splay of the tripod legs for your heavy setup.

Q: 6. Will this work on a C100?

A: Should work so long as C100 has the standard 1/4 female tripod screw hole.

Q: 7. MeFOTO's website indicates the Globe Trotter comes with spiked feet however B&H says it does not. Which is correct?

A: Yes mine came with the spikes inside the bag. The has a storage compartment in it. That is where you will fine them as well as instruction booklet. Hope this helps.

Q: 8. the tripop MeFoto A2350Q2 come with a camera plate PU60. I need an extra one, which should I buy? could you indicate product number please. I will use it with a couple of Nikon D810

A: Any Arca-Swiss compatible mount plate will work with this ball head, they are made by a multitude of companies in various sizes as needed for your particular camera and lens mount application.

Q: 9. can you remove the head?

A: You can remove the mount and leave it on your camera, and you can also remove the whole head. It's sturdy and it travels very well.

Q: 10. How easy it is to buy from India? How to deal with customs?

A: You can easily order this tripod with a credit card via our website. As to customs, we unfortunately we cannot do that for you. We suggest contacting the shipping carrier, DNL for further information regarding customs payment in your area.