This Blackmagic Mini Converter SDI Multiplex 4Kfrom Blackmagic Mini Converter SDI Multiplex 4Kallows you to convert between Quad Link HD-SDI, Dual Link 3G-SDI, and Single Link 6G-SDI Ultra HD (UHD) signals. This is useful for connecting devices that use Quad and Dual Link UHD signals with those that use Single Link 6G signals. You can also convert between Dual Link HD-SDI 4:4:4 and Single Link 3G-SDI.

The output signal from the Mini Converter will have a matching resolution and frame rate as the input signal. Embedded SDI audio is sampled at 48kHz and 24-bit. When inputting a single SD or HD SDI signal, all four SDI outputs are active and pass through the incoming signal with no conversion. This also applies for 6G-SDI signals when no Dual Link or Quad Link conversion is selected. This lets you take a single SD/HD/6G-SDI signal and send it to four separate devices. For powering the Mini Converter, a 12V universal power supply comes included.

Convert Between 4K and UHD SDI Signals    Single Link 6G-SDI Input & Output    Dual Link 3G-SDI Input & Output    Quad Link HD-SDI Input & Output    Automatic SD, HD, and 6G Switching    Output Resolution Matches Input    48kHz 24-Bit Audio    4:2:2 and 4:4:4 RGB and YUV Support    USB 2.0 Port for Updates    12V Universal Power Supply Included

Features the latest 6G-SDI technology that operates at four times the data rate of normal HD-SDI.

The Mini Converter allows you to convert between Quad Link HD-SDI, Dual Link 3G-SDI, and Single Link 6G-SDI Ultra HD (UHD) signals.

Conversions:

- Single Link 6G/3G to Dual Link 3G/1.5G

- Single Link 6G to Quad Link 1.5G

- Dual Link 3G/1.5G to Single Link 6G/3G

- Dual Link 3G to Quad Link 1.5G

- Quad Link 1.5G to Single Link 6G

- Quad Link 1.5G to Dual Link 3G

6G-SDI is fully compatible with all SD, HD, and 6G-SDI equipment, so you can connect to all your existing equipment. A wide range of video resolutions are supported, including 4K 4096x2160p24 signals, Ultra HD 3840x2160p, 2K 2048x1080p, 1080p, 1080i, 720p, and SD in both NTSC and PAL. Resolution and frame rate of the output signal will match that of the input signal.

Control Mini Converter settings using the DIP switches on the side of the device, or use the included Converter Utility software via the USB 2.0 connection. The Converter Utility software is also used to download and install firmware updates directly from Blackmagic Design's website.

The 12V universal power supply comes with international plug adapters for all countries. A cable tie point is provided to secure the power supply connection, thus preventing any accidental power disruption.

• 4:2:2 and 4:4:4 color precision in YUV and RGB color spaces
• Compliant with SMPTE 292M, SMPTE 259M, SMPTE 296M, SMPTE 372M, SMPTE 424M and SMPTE 425M standards

Related Questions and Answers

Q: 1. Does this support Talkback signal from BMD ATEM 2M/E Constellation HD to all 8 outputs? Considering I'm using BMD Studio Cameras

A: Yes, the Blackmagic Design Mini Converter SDI Distribution supports Talkback on all outputs.

Q: 2. could this be used to extend 4 independent HD-SDi signals? trying to find a 4in 4out HDSDI amp.

A: It cannot, this product is a Multiplexer that is designed to convert 4k to UHD through the various varieties of SDI connection. If you wanted to split a single SDI signal out 4 ways you would need the Mini Converter SDI Distribution 4K, which actually will allow you to split the signal up to 8 HD-SDI connections. If this is not what you are looking to do please email us directly at provideo@bhphoto.com. From there we can assist you in finding the proper product for your needs.

Q: 3. what cable to use?

A: You can use any standard 75 Ohm BNC cable (RG6 is recommended). I recommend the Canare HD-SDI cables, for example B&H # CA56HSVB20.

Q: 4. Can this ONE device be connected to one output on an atem constellations and extract audio from 2 diff inputs?

A: No. The Blackmagic Design SDI to Audio Mini Converter SDI outputs contain mixed program audio only. However, you could loop a single input through this converter and extract that audio.

Q: 5. This can take 2 different SDI input (example, SDI-1 and SDI-2) then out this 2 sources in one SDI out (SDI-out 1 or any)?

A: Duplicate

Q: 6. Does Blackmagic make a 12G version of this?

A: There is the Blackmagic Design Teranex Mini SDI 12G Distribution. https://www.bhphotovideo.com/c/product/1186267-REG/blackmagic_design_convntrm_ea_da_teranex_mini_quad_sdi.html

Q: 7. I have a Swann SDI camera and I have a new HD BNC Qsee recorder. Will this units output give me a usable HD BNC signal?

A: No, it will not. This will only give you a standard analog output, maybe wide screen but nevertheless it will be analog.

Q: 8. Will this convert a 35mm film camera output (analog) to SDI signal (Digital) ?

A: No, this is a converter to go from SDI to analog. Here is a converter that will convert from analog to SDI: https://www.bhphotovideo.com/c/product/558906-REG/Blackmagic_Design_CONVMAAS_Mini_Converter_Analog_to.html?sts=pi&pim=Y

Q: 9. I got my Mini Converter Analog to SDI. Question: How do you get S-VHS video into the unit with the BNC cables? I have yet to find an answer on line nor is there any instructions for me to get my head around this. A shot tried to sell me an adapter but in one look it was simply an S-VHS female to an old fashioned RCA composite. What am I missing here? Thanks! Tom from Thailand

A: You need a S-Video to BNC adapter. Since B&H has a stupid policy you'll have to google that otherwise I'd attach a link.

Q: 10. Can use the Dual Link SDI output from my Sony PMW-F3 and convert the streams to a single SDI 3G (444)?

A: Yes, the Blackmagic Design Mini Converter SDI Multiplex 4K can take Dual-Link HD-SDI output from the Sony PMW-FG3 and convert it to 3G-SDI in 4:4:4.