The IndiPRO Power Grid System with LP-E6 Batteries for Blackmagic Camerafrom IndiPRO Power Grid System with LP-E6 Batteries for Blackmagic Camerapowers your Blackmagic Pocket Cinema Camera using two available Canon LP-E6 type batteries. The Plate incorporates a clamp so you can mount it to LWS 15mm support rods and it features a right angle power plug to keep the cable neat and snug on the camera.

The plate itself features a two-sided design that mounts the batteries one on each face, two batteries are required to supply the necessary voltage to power the camera. The batteries securely snap in to the plate, and you must press a small tab to remove them. A green LED built into the plate lights up to indicate sufficient voltage to power for the camera. When used in conjunction with the camera's internal battery, you can hot swap the batteries without powering down the camera. The Power Grid System is Made in the USA.

External Battery Power System    7.4V, 1750mAh Lithium-Ion Batteries    15mm Rod Clamp Mount    Supports Hot-Swapping    Right-Angle DC Power Connector

Powers your Blackmagic Pocket Camera using two available Canon LP-E6 type batteries.

Integrated rod clamp for LWS (light weight standard) 15mm support rods, allows you to mount the Power Grid System in a variety of positions.

Space saving battery plate that mounts available batteries face to face instead of side-by-side.

Batteries securely snap into place, and a release tab must be depressed to remove them, which means that the batteries remain attached during normal use.

A built-in green power LED provides confirmation that the Power grid system is supplying enough voltage to power the camera.

Related Questions and Answers

Q: 1. Is this compatible with other cameras? Specifically Sony a7siii

A: No, the following unit is made and designed for blackmagic pocket cinema camera.

Q: 2. Where does it mount to the Pocket Camera?

A: It's designed to mount on rails, not the camera itself, but the rail mount can be unscrewed leaving a 1/4-20 hole if you want to mount it another way.

Q: 3. Does this work with the Blackmagic Pocket Cinema Camera 4K? As it also uses LP-E6 batteries... Thanks.

A: Yes, this product should work with the Pocket Cinema Camera 4K. The Pocket Cinema Camera 4K is powered by LP-E6 batteries, which is the kind of dummy connection this offers.

Q: 4. does it include the batteries?

A: No this unit does not include batteries. All batteries are sold separately.

Q: 5. Does this come with the batteries?

A: There are no batteries that come with this unit. All of the batteries are sold separately.

Q: 6. this rig works with black magic cinema camera 4k ? (Not the pocket)

A: This rig is made for the Pocket camera only.

Q: 7. how long does it power Bmpcc?

A: With two fresh batteries, you should get about 4-5 hours of run time.

Q: 8. would this work for Blackmagic cinema pocket camera?

A: The IndiPRO Tools POWER POD produces 7.2 VDC while the BM Pocket Camera requires 12-20 VDC. So this power solution is not correct.I would suggest the Switronix PocketBase and the Quick release as the best solution at this time.

Q: 9. can you power an external monitor with this as well as a bmpcc simultaneously?

A: No, it does not have a D tap or any other sort of DC out other than the plug for the Pocket Camera. Also, the power demands of the camera itself would make doing this impractical.

Q: 10. Is there an adapter to make it usable for BMCC as well? I have both BMCC and BMPCC, it would be great to have a battery system that can go between 2 cameras.

A: I actually had to get my ends changed for my BMPCC. A local shop swapped my wall charger end (straight) with the battery pack (right angle) as far as the bmcc I think you may need to cal indipro or a specialized cable maker to make you an adapter.