The Blonder Tongue CATV Modulator SAW Filter Channel 23from Blonder Tongue CATV Modulator SAW Filter Channel 23is an all-solid-state audio/video modulator that provides a modulated visual and aural RF carrier output on one specific CATV channel. The unit modulates the audio and video inputs and provides the requested RF CATV channel output for use in a CATV, MATV or SMATV system. The modulator accepts standard (sync negative) polarity video at a 0.7-2.5V peak to peak level from sources such as a TV camera, video tape recorder, TV demodulator or satellite receiver.

The modulator features a +55dBmV RF output level, and an IF SAW filtering for adjacent channel operation. All aeronautical channels are offset positive with a tolerance of ±5kHz as required by FCC 21006. All level controls are located on the front panel. The RF level control provides up to +55dBmV output. The video modulator control sets the depth of modulation for 87.5% over an input video level range from 0.7VP/p to 2.5VP/p. An audio modulation control permits adjustment for ±25kHz peak deviation of the aural carrier.

Meets FCC docket 21006 aeronautical frequency offset requirements

Fully compatible with BTSC encoded stereo audio

Front panel accessible level controls for easy set-up and adjustments

AC outlet

Related Questions and Answers

Q: 1. Is the duplicator able to lock the usb's once files have been loaded to them?

A: According to the manufacturer it cannot lock the USB drives.

Q: 2. do you have ex-stock for 2 units ? If not what is the lead time for this ?

A: We do not have this product in stock. This is a Special Order Product that is dropped shipped to you directly from the manufacture 7-10 business days after the order is placed.

Q: 3. Can residential input coaxial cables (TV, weather station, etc) convert directly to RJ45/RJ11 connector for indoor weather station console? VideoEase CATV Balun II appears to do this. Thank you...

A: Yes, you are able to use your standard coax cable and convert the signal to RJ-45.

Q: 4. Would this work with a Canon c70?

A: Yes, it will Canon eos C70 Cinema Camera (RF lens mount). The camera is 6.3 x 5.1 and the bag Ruggard Fabric Rain Shield Large is 23'' wide and can accommodate lenses below 21''.

Q: 5. what is the difference between the Tamarac anvil 23 and 27?

A: The Tamrac Anvil 23 is 17.3 inches tall and the Anvil 27 is 19.7 inches tall for the interior. All other interior dimensions are the same but because of the added height, the Anvil 27 would be able to hold a longer lens and/or more equipment.

Q: 6. Can this format erase, copy and compare in 1 function? I currently have that with Vinpower. Thank you

A: The EZ Dupe 23 Target USB Duplicator can format, erase, copy, and compare, but not in one function.

Q: 7. How does this Ruggard Rain shield large, compare with the Think Tank Emergency Rain cover large?

A: In comparing the large sizes in each model, the Think Tank Emergency Rain Cover is longer at 27.5" but only has a diameter of 7.8". The Ruggard Fabric Rain Shield Large is only 23" long but accepts a slightly wider diameter of 8".

Q: 8. Would any of these Ruggard Rain Shields work with a Sony PXW-X70 camcorder? I've looked at the listed accessories on the X70 page but aren't crazy about any of them (too expensive). Thanks.

A: Though it isn't necessarily made for the Sony PXW-X70, it will cover it and it will work to protect it when shooting in the rain.

Q: 9. Is there enough space for a canon 400mm lens with hood and canon 5D Mark iii dslr body?

A: There should be. The caveat would be 'What additional gear is being carried?' The dividers are Velcro and can be adjusted; however, if significant other gear is being carried, there may be some difficulty and with the camera and lens (total cost) how much risk is one willing to assume.

Q: 10. Is the padded hip belt removable?

A: Yes, the padded MOLLE hip belt is removable on the Tamrac Anvil 23 Backpack.