Soundcraft Signature 10 Mixer With Effects

Product Code: eq70340
Availability: In Stock

$1,257.00 $1,860.36

Qty

39 reviews Write a review

Description
Reviews (39)

The Soundcraft Signature 10 Mixer with Effectsfrom Soundcraft Signature 10 Mixer with Effectsis a 10-input analog mixer with onboard effects. The Signature 10 features faders with GB Series audio routing, flexible pre/post switching on each Aux, routing and switching options, and dedicated outputs. Housed in a robust metal construction and equipped with an internal universal power supply, this mixer is recommended for use by musicians and bands, in music venues and theaters, for tour sound, houses of worship, and more.

The built-in Ghost microphone preamps deliver high-quality audio with a wide dynamic range, clarity, and a high level of headroom. Additionally, the mixer uses Sapphyre Asymetric EQ for equalizing every vocal and instrumental element in a mix, and GB Series audio routing technology.

The mixer provides a wide variety of built-in Lexicon studio-grade effects including reverb, chorus, and modulation, as well as dbx limiters on the input channels. XLR and switchable Hi-Z inputs enable guitars, basses, and other instruments to be connected directly.

The Signature 10 comes with a 2-in/2-out USB interface and free downloads of the Lexicon MPX-L native plug-in and Ableton Live 9 Lite.

10-Input Analog Mixer 6 Ghost Mic Preamps Sapphyre British EQ Per Channel 2-In/2-Out USB Recording Lexicon Effects Engine Switchable Hi-Z inputs HPF & 48V on Mic Channels

Parameters
Frequency Response	Mic / Line In to Any Output: 20 Hz to 20 kHz (±1.5 dB)
THD	Mono Mic Sensitivity -30 dBu, Input Level -16 dBu, +14 dBu @ Mix Output: < 0.002% @ 1 kHz Stereo Mic Sensitivity -30 dBu, Input Level -16 dBu, +14 dBu @ Mix Output: < 0.007% 1 kHz
Noise	Mono Mic Input E.I.N. (Max Gain): <-126 dBu (150 Ohm source) Stereo Mic Input E.I.N. (Max Gain): <-124 dBu (150 Ohm source)
Crosstalk @ 1 kHz	Channel Mute: >-90 dB Fader Cut-off (rel +10 mark): >-90 dB Aux Send Pots Offness: >-82 dB
EQ Section	EQ (Mono Inputs) HF: 12 kHz, ±15 dB MF (swept): 140 Hz to 3 kHz, ±15 dB LF: 60 Hz, ±15dB EQ (Stereo Inputs) HF: 12 kHz, ±15 dB MF: 1 kHz, ±15 dB LF: 60 Hz, ±15 dB
Input & Output	Input and Output Levels Mic Input: +12.5 dBu max Line Input: >+26 dBu max Stereo Inputs: >+26 dBu max Mix Output: +21.5 dBu max Headphones (@ 150 Ohms): 300 mW
Impedance	Input & Output Impedance Mic Input: 1.2 kOhms Hi-Z Input: 968 kOhms Line Input: 10 kOhms Stereo Input: 21.5 kOhms Outputs: 150 Ohms (balanced), 75 Ohms (unbalanced)
USB Audio	Inputs/Outputs: 2-in, 2-out Bit Depth: 16-bit, 24-bit Sampling Rate: 44.1 / 48 / 88.2 / 96 / 176.4 / 192 kHz
Power Consumption	<50 VA
Operating Temperature	41 to 104°F / 5 to 40°C
Dimensions	19.3 x 15.0 x 8.3" / 490.0 x 380.0 x 210.0 mm
Weight	10.9 lb / 5.0 kg
Packaging Info
Package Weight	13.95 lb
Box Dimensions (LxWxH)	19.3 x 15.2 x 8.3"

High-Performance 10-input small format analog mixer with onboard effects

Ghost mic preamps with low noise performance

Sapphyre British EQ with sweepable mid-bands per channel

Lexicon effects engine featuring reverbs, delays, choruses, and modulations

dbx limiters (high-ratio compressors) on input channels

2-in/2-out USB audio playback and recording

Switchable Hi-Z inputs for guitars, basses, and other instruments

Hi-Pass filters (low-cut) and 48V phantom power on all mic channels

Comprehensive GB Series audio routing

Smooth faders

Robust metal construction for tour-grade build quality and reliability

Internal universal power supply

Related Questions and Answers

Q: 1. Does this mixer have midi in/out for fx sync?

A: The Soundcraft Signature 12 MTK does not feature any MIDI functionality or connections.

Q: 2. Where is the FX16ii manufactured?

A: The country of manufacture for the Soundcraft FX16ii 16-Channel Mixer with Built-In Lexicon Effects Processor is China.

Q: 3. Is this 110-240V?

A: Based on the manual, this unit is rated at 110-240v.

Q: 4. what is the origin of the product?

A: The origin of this product is China.

Q: 5. Is there a mic and line level switch for the outputs on this board?

A: No, the Soundcraft EFX 12-Channel Mixer has separate Mic and Line inputs.

Q: 6. What are the dimensions (out of the box) of this device? Thanks!

A: Height 4.3 Width 26 Depth 19.3 Weight 25.1 lbs.

Q: 7. Regarding the Rack Mount Kit, How many RU space does this take?

A: I wish I could help you, but I use mine on a desktop.

Q: 8. Soundcraft Signature 10...I need to know the dimensions. Weight, length, width and height...I can't seem to find answers?

A: Weight: 13.25 lbs.Dimensions: 4.33 x 12.20 x 14.96

Q: 9. Can this unit perform a mix minus?

A: You can create a mix minus using one of the Aux sends as your mix to a caller, and bring the callers audio into an available channel on the board. The board by itself does not have a mix minus feature. For a podcasting style mixer/ recorder with built-in mix minus, here's this option BH #RORDECSTRPRO.

Q: 10. Can I use an adapter to record onto a USB flash drive? Like USB A to B Adapter, Type A Female to Type B Male

A: Unfortunately you cannot record onto a flash drive. The Soundcraft Signature 10 can only be connected to your computer as an interface. This is the cable you will need BH #PECUAMUBM6 which can be found on the B&H website.

Frank	27/09/2024
[13.95 lb] This little mixer was perfect for my jazz trio with two vocals and electric piano. I was looking for simple, small, and quiet, and all three criteria were met. Like a lot of small devices, it has the 'wall wart' power supply which is the only negative for me, but that is a very small negative. The reverb/delay helps 'room up' the vocals which helps especially outdoors in a small setting. 5

Frank	27/09/2024
[13.95 lb] This little mixer was perfect for my jazz trio with two vocals and electric piano. I was looking for simple, small, and quiet, and all three criteria were met. Like a lot of small devices, it has the 'wall wart' power supply which is the only negative for me, but that is a very small negative. The reverb/delay helps 'room up' the vocals which helps especially outdoors in a small setting. 5

Frank	27/09/2024
[13.95 lb] This little mixer was perfect for my jazz trio with two vocals and electric piano. I was looking for simple, small, and quiet, and all three criteria were met. Like a lot of small devices, it has the 'wall wart' power supply which is the only negative for me, but that is a very small negative. The reverb/delay helps 'room up' the vocals which helps especially outdoors in a small setting. 5

Manuel	16/09/2024
[<50 VA] Got delivered quickly and Fits perfectly ! 5

Manuel	16/09/2024
[<50 VA] Got delivered quickly and Fits perfectly ! 5

Michael	01/09/2024
[<50 VA] I could not find this part anywhere for my Soundcraft Signature 10 mixing board (Awesome board by the way!). So I googled it and happened upon B & H Photo's website. They had the custom rack mount kit for my board (They have a HUGE inventory of Pro Audio equipment). So after ordering it came very quickly and packaged very sturdily. I'm not sure about every state but in Florida there is no charge for sales tax and most items with B & H are free shipping! The rackmount is painted in a beautiful metallic sky blue to exactly match the Soundcraft mixing board line's color scheme. It also has a pre-fabricated optional knockout that you can pop out to neatly route your cabling from your rack to the top of your mixing board. I have also since ordered some other audio equipment from B & H Photo and every transaction has been 100% awesome! Michael from Orlando. 5

Michael	01/09/2024
[<50 VA] I could not find this part anywhere for my Soundcraft Signature 10 mixing board (Awesome board by the way!). So I googled it and happened upon B & H Photo's website. They had the custom rack mount kit for my board (They have a HUGE inventory of Pro Audio equipment). So after ordering it came very quickly and packaged very sturdily. I'm not sure about every state but in Florida there is no charge for sales tax and most items with B & H are free shipping! The rackmount is painted in a beautiful metallic sky blue to exactly match the Soundcraft mixing board line's color scheme. It also has a pre-fabricated optional knockout that you can pop out to neatly route your cabling from your rack to the top of your mixing board. I have also since ordered some other audio equipment from B & H Photo and every transaction has been 100% awesome! Michael from Orlando. 5

Jonathan	22/08/2024
[13.95 lb] This is not a heavy metal chassis screwed down metal shaft pot battle tank. It also has a very light switcher instead of a transformer based power supply. It is a great relief in my gig bag compared to the heavy Mackie 802 it replaced. The features are perfect for a duo: two mics and two instrument/line inputs. The reverbs are nice. The overall sound is as good as the Mackie it replaced. 5

Jonathan	22/08/2024
[13.95 lb] This is not a heavy metal chassis screwed down metal shaft pot battle tank. It also has a very light switcher instead of a transformer based power supply. It is a great relief in my gig bag compared to the heavy Mackie 802 it replaced. The features are perfect for a duo: two mics and two instrument/line inputs. The reverbs are nice. The overall sound is as good as the Mackie it replaced. 5

Jonathan	22/08/2024
[13.95 lb] This is not a heavy metal chassis screwed down metal shaft pot battle tank. It also has a very light switcher instead of a transformer based power supply. It is a great relief in my gig bag compared to the heavy Mackie 802 it replaced. The features are perfect for a duo: two mics and two instrument/line inputs. The reverbs are nice. The overall sound is as good as the Mackie it replaced. 5