Vislink Hht3 Handheld Receiver Kit Gold Mount

Product Code: eq70496
Availability: In Stock

$59,850.00 $94,563.00

Qty

18 reviews Write a review

Description
Reviews (18)

Featuring a bright 12" display and rugged carbon fiber construction, the VISLINK HHT3 Handheld Receiver Kit Gold Mountfrom VISLINK HHT3 Handheld Receiver Kit Gold Mountis a lightweight and portable solution for receiving, monitoring, and outputting wireless video transmission signals from UAV-mounted cameras and other wireless systems, such as HEROCast-equipped GoPro cameras. Included in this kit is a case for storing and transporting the receiver, and an Anton Bauer battery mount for powering the unit using a Gold Mount battery.

Using active signal diversity, the receiver accepts signals from two antennas to enhance demodulated performance and increase operating range. It operates on the 2.0 to 2.5 GHz frequency bands and supports resolutions up to 1080i at 25/29.97 fps and 720p at 50/59.94 fps. Video can be decoded as MPEG-2 or H.264/MPEG-4.

The bottom of the receiver features a comprehensive connector panel which includes HD-SDI, HDMI, composite video, and component video outputs. There is also an analog audio output, user data channel output, and an Ethernet port for control via a web browser interface. On-board control and monitoring is available via the built-in display and front panel buttons. Built-in speakers enable on-board audio monitoring.

2.0 to 2.5 GHz Frequency Bands Supports 1080i and 720p Video Dual Antennas H.264/MPEG-4 and MPEG-2 Video Decoding Built-in 12" LCD Screen HDMI, HD-SDI, and Analog Video Outputs Analog Audio Output Control via Buttons and Ethernet Gold Mount Battery Plate Lightweight Carbon Fiber Construction

RF Specification
Frequency Bands	2.0 to 2.5 GHz
Tuning Range	400 MHz nominal
Frequency Selection	Up to 16 pre-set channels, or tuning in 1 MHz steps via front panel control
Noise Figure	3 dB typical, 4 dB max.
Threshold	92 dBm to BER 10E-5 (nom. QPSK)
Demodulation	DVB-T 2k ISDB-T 2k, 4k, 8k, with time interleaving
Demodulation Modes	QPSK, 16QAM, 64QAM FEC: 1/2, 2/3, 3/4, 5/6, 7/8 Guard Interval: 1/32, 1/16, 1/8, 1/4
Bandwidth	6, 7, 8 MHz
Data Rate	4.98 to 31.7 Mbps
Decryption	BISS 1 and E
User Data Output	Selectable in the range 1,200 to 230,400 baud
Video and Audio
Decoding	H.264/MPEG-4 and MPEG-2, 4:2:2 and 4:2:0, with automatic selection
Video Outputs	1 x HDMI 1 x HD-SDI, SMPTE-292M (299M) 1 x SMPTE-259M (272M) 1 x Analog composite (YUV) and Y/C component
ASI	1 x DVB ASI, 188/204 output
Formats	1080i: 1920 x 1080, 25/29.97 fps 720p: 1280 x 720, 50/59.94 fps 480i (NTSC): 720 x 480 and 720 x 512 576i (PAL): 720 x 576 and 720 x 608
Latency	Automatic selection down to 1 frame (40 ms), transmitter encoding profile dependant
Digital Audio Output	Two stereo channels embedded in SDI and HDMI
Analog Audio Output	LEMO-type connector (4 x mono / 2 x stereo)
Speakers	2 x 1.5 W
Monitor
Type	LCD
Backlight	LED
Size	12" (30.5 cm)
Aspect Ratio	16 x 9 (4 x 3 pillar box mode)
General
Remote Control	Ethernet (LEMO-type connector)
Software Upgrade	USB (shared with Ethernet over LEMO-type connector)
Power Supply	12 to 36 VDC
Operating Temperature	-4 to 122°F (-20 to 50°C)
Operating Humidity	95%
Operating Altitude	2.8 miles (4500 m)
Dimensions	8.7 x 15.7 x 4.3" (22.0 x 40.0 x 7.2 cm)
Weight	7 lb (3.2 kg)
Packaging Info
Package Weight	24 lb
Box Dimensions (LxWxH)	21.1 x 16.1 x 8.1"

Operates on 2.0 to 2.5 GHz frequency bands
Compatible with HEROCast and HEROCast BacPac
Supports 1080i and 720p resolutions at 50/59.94 fps
H.264/MPEG-4 and MPEG-2 video decoding
DVB-T COFDM modulation
Dual antennas
Built-in 12" LED-backlit LCD screen for monitoring
HDMI, HD-SDI, and composite/component video outputs
Control via front panel buttons and over Ethernet
Summary front panel alarm and comprehensive internal lock alarms
User data channel output
Built-in two-channel speakers
Lightweight and rugged carbon fiber construction

Related Questions and Answers

Q: 1. Does this base kit slide back and forth to allow proper fitting on shoulder if longer lens is attached?

A: Yes, The base plate included in the Movcam Base Kit for Sony FX9 (V-Mount) will allow you to re-position the Arri style Dovetail plate to your requirements.

Q: 2. If I feed HDMI to transmitter. Will I be able to get converted video signal from SDI out on transmitter to feed to my monitor?

A: Yes, the Vaxis Storm 1000S Wireless Kit (V-Mount) will cross-convert from the HDMI to SDI.

Q: 3. How many transmitters can the receiver take?

A: Vaxis Storm 3000 Receiver (V-Mount) accepts a single transmitter.

Q: 4. What's the waist range in inches for the 'vest' on the Tilta Float?

A: The waist range is 23.6 to 47.2"

Q: 5. Is there a published frequency spectrum list for each corresponding channel of the Vaxis 3000? Is there anyway to get this if not?

A: The frequency range supported by the Vaxis Storm 3000 Wireless TX/RX Kit is 5.1 to 5.9 GHz.

Q: 6. Does it display camera information on Canon C300 mk III? Shutter angle, ISO and WB, etc.

A: The SmallHD ULTRA 5 will display info as it is set to. Having it show you camera settings is a configuration between the camera and the screen.

Q: 7. What is the inside diameter of the post mount?

A: The thread of the handle of the Tilta Float Handheld Gimbal Support System for DJI RS 2 (Gold Mount) (B&H# TIGSST01AB) or (V-Mount) BH #TIGSST01V is 1/4"-20. Tilta does not consider fitting this to other gimbals to be an especially tight fit, but it may be possible. After all, the RS2 is designed to attach to other devices. Similarly, if you are wanting to attach it to a different gimbal then your satisfaction with the fit may vary.

Q: 8. Hi , do you have in gold mount ?

A: We do not. This is not available with Gold Mount Plates.

Q: 9. Will this work with a DJI Ronin-S?

A: No, it will not work with the Ronin-S.

Q: 10. Judging by the image, the ARRI pins can be moved?

A: no the ARRI locating pins can not be moved

Joshua	26/09/2024
[6, 7, 8 MHz] Me being focus puller I made a very good purchase, this monitor is excellent for my job 5

Joe D	25/09/2024
[2 x 1.5 W] Yeah is pricey but this thing is solid. Metal internal frame and you can really snug the supplied nuts tight for the cold shoe. Removing the cold shoe and mounting on a small friction arm is really nice too! 5

Elvis	17/09/2024
[7 lb (3.2 kg)] The screen on the 702 Touch has a slightly wider gamut and I like the touch screen but switched this for 2 reason. More power efficient and can show 2 inputs at once. For setting up and checking on multiple cameras this has been amazing. Set up a button for SDI 1 and SDI 2 and multi view. Then I can quickly jump to one input or another or both. Makes setting up an interview easy and also great for just keeping an eye on multiple cameras. 5