Da-Lite Motorized Rear Projection Screen 45X80"

Da-lite Motorized Rear Projection Screen 45x80"

Product Code: eq7063
Availability: In Stock

$17,539.20 $22,274.78

Qty

13 reviews Write a review

Description
Reviews (13)

The Da-Lite Motorized Rear Projection Screen 45x80"is unique in its design. It is manufactured to be installed during the construction phase of your media, class or board room. Afterwards, the fabric is added to complete the set-up. This stylish ceiling recessed screen is for those who don't want the screen showing when it is not immediately needed but available at the flip of a switch.

For easy installation, the Tensioned Advantage Deluxe is available with SCB-100 and SCB-200 (RS-232 serial control board) or Low Voltage Control unit built into the case.

Tensioned models are made with a thin vinyl surface that is stretched to assure a perfectly flat surface. Non-tensioned screens are fiberglass and not as taut as tensioned models.. Deluxe models have a door that opens and closes, Non-Deluxe models have a 2" slot.

Ceiling Recessed Tensioned 92" Diagonal HDTV Format 16:9 Aspect Ratio DA-Tex Finish Patented in-the-Roller Motor Quiet Operation Case Put in During the "Rough-in" Stage

Parameters
Type	None
Style	Advantage Deluxe
Front/Rear Projection	Rear
Mount	Ceiling recessed
Finish	DA-Tex - flame retardant and mildew resistant
Tension Control	Tensioned
Keystone Control	Not Applicable
Dimensions	None
Overall Size	Not Specified by Manufacturer
Image Size	45x80" (1.1 x 2 m)
Diagonal	92" (234cm)
Format	HDTV
Aspect Ratio	16:9
Masking Options	Black masking borders standard
Controls	None
Voltage	Door is 120VAC, 60Hz, 1.2 amp Screen motor is electrically operated 120 VAC, 60Hz, 1.4 amp
Control Options	Single motor Low Voltage Control(LVC) - external Single motor Low Voltage Control(LVC) - built-in electrical connections will be on right end of screen case on units with built-in LVCs Wireless Remote Control for LVC Radio Frequency Remote Infrared Remote Video Projector Interface - 12V or 5V Key Locking Cover Plate for 120V Switch or LVC Key Operated Switch for 120V only (NOTE: Cannot be used with LVC) 220/240 Volt (50Hz) Motor NET-100 Ethernet-Serial Adapter
Casing	None
Color	White
Material	Rigid aluminum
Length	102.75" (261cm)
General	None
Shipping Weight	125 lbs (56.7kg)
Packaging Info
Package Weight	135 lb
Box Dimensions (LxWxH)	106 x 13 x 10"

Handsome white powder coated closure doors and case provide a clean look and allow easy installation of ceiling tiles

Front projection surfaces standard with black backing for opacity

UL Plenum Rated case

Related Questions and Answers

Q: 1. CAN YOU ADJUST HOW FAR IT COMES DOWN IF YOU DON'T WANT THE WHOLE 12" DROP?

A: Elite Screens Spectrum2 Motorized Projection Screen with 12" Drop (49.0 x 87.2") BH #ELSPM100HE12 may be stopped anywhere along its descent or ascent.

Q: 2. Does this come in a black case version? If not, can the white casing be painted?

A: The Elite Screens Spectrum2 Motorized Projection Screen with 12" Drop (44.6 x 79.4") B&H # ELSPM91HE1 is not available with a black case. If the case was properly prepared it may be painted. This would void the manufacturer's warranty however.

Q: 3. is 8'2" X 13'11" the actual screen size, not including the frame? Or is it 8'2" wide and 13'11" tall fully assembled?

A: Overall Size 8'2" x 13'11" (2.5 x 4.3 m)

Q: 4. Can this be used in New Zealand (eg 240v)? thanks

A: This operates on 110v you would need a step up converter.

Q: 5. is this 16:9?

A: The aspect ratio of the screen is 1.85:1.

Q: 6. I'm confused. The Heading and the Specs don't match with respect to viewing size. So which is correct?

A: The Elite Screens Spectrum2 Motorized Projection Screen with 12" Drop (44.6 x 79.4") BH #ELSPM91HE12 specifications: View Size: 44.6" H x 79.4" W. Overall Size: 62.8" H x 86.1" W x 3.5" D. Diagonal: 91" Aspect Ratio: 16:9 Extra 12-inch Drop.

Q: 7. Is it possible to replace just the screen for this model? Mine is damaged but the frame is still good.

A: The replacement fabric screens for the Elite Screens Yard Master 2 Dual Folding Front/Rear Projection Screen (73.5 x 130.7"), B&H # ELOMS150H2DU, would be the Elite Screens Yard Master 2 Dual 150"/16:9 Indoor/ Outdoor - Wraithveil Dual (B&H # ELZOMS150H2D).

Q: 8. How fast does it take to go up 4 mins. that seems like a long time??

A: The screen takes about 15 seconds to drop or raise. The motors in these screens have built in heat sensors, so the information posted on our website indicates how long the motor can run before shutting itself off.

Q: 9. Is there a connector where the power cord plugs into the screen? If so, what are its dimensions?

A: The AC line cord is hard-wired into the screen's motor of the Elite Screens Spectrum2 Motorized Projection Screen with 12" Drop (49.0 x 87.2") BH #ELSPM100HE12.

Q: 10. What are the dimensions of the carrying case? I'm wondering if it will fit in a hard case smaller than 62 linear inches as required for checked airline luggage.

A: The carrying case for the Elite Screens Yard Master 2 Dual Folding Front/Rear Projection Screen (58.8 x 104.6"), B&H # ELOMS120H2DU, is measured at 38.6 x 7.1 x 9.8".

Doug	29/09/2024
[16:9 ] Looking forward to getting all of this stuff together 5

A_Step	24/09/2024
[Rigid aluminum] Screen is being used in a 40 x 40 foot room with a 7.2 theater system. The projection screen is over the stage and is long enough to extend down and up out of the way when not in use. If the light were not in the way, I could have moved the screen even higher. 5

haze_1	07/09/2024
[92" (234cm) ] I use it in a classroom at a university. It's got a great surface, brilliant white, big and more than I expected. It looks like a big LCD screen on the wall, way cool. 5

Tedsnap	28/08/2024
[92" (234cm) ] Well packaged. Easy to assemble. System tensions screen perfectly for a no-sag presentation. 5

HOZ	29/06/2024
[White] EASY ASSEMBLY, GREAT PICTURE. ...GREAT PRICE....COULD NOT BE MORE PLEASED 5

Kevin	21/06/2024
[106 x 13 x 10"] The screen functions as described. we used the additional brackets to mount the screen to a concrete wall. The mechanical parts of the screen are smooth and easy to use! 5

Coastal	08/06/2024
[HDTV ] Great for confrence rooms 5

Chip	04/06/2024
[106 x 13 x 10"] We use the screen in our church sanctuary once or twice a month. Installing it was an adventure with the weight and length, but several sections of scaffolding and a couple friends made the install move along nicely. The instructions for wiring were right on and it worked first try! The image is right on and visible the entire length of our viewing area (over 100'). 5

CMS	02/06/2024
[135 lb] The screen, frame, and legs are well built and should last a long time. 5

Zack	24/05/2024
[Tensioned] I installed in my living room in between ceiling joists. It works great. I use it with a Panasonic HD projector. It impresses everyone who walks in the room. Has a clean appearance when retracted. Note: it didn't come with a 12v trigger as both the B&H customer service rep and myself thought it did. We both misunderstood the description (it's optional.) The part was available at Da-Lite for $80 and came with no instructions. I got it to work after a few emails and chats with da-lite. Also, I ended up placing some holes in the top of the case to mount using 8 Lag bolts into the 2nd story floor structure. All the hardware that comes with it assumes you will have access to hang it from the top which requires access via the side while it's in it's final position. I was putting it in a hole the size of the case in my finished ceiling so that method would not work ( I would have had to remove and re-install a lot of drywall). I knew this before I purchased by reading the installation instructions so no worries just a fact and maybe a consideration for future changes to the case or just the directions. 5