This Nanuk 945 Waterproof Hard Case, in yellow, features a custom-cut foam that fits the DJI Phantom 4, Phantom 4 Pro, Phantom 4 Pro+, and Phantom 3 along with the gimbal and camera, up to four flight batteries, the radio controller with Wi-Fi extender, an iPad mini or similar tablet, and other accessories.

Also Fits Controller with Wi-Fi Extender    Fits Four Flight Batteries    Fits Spare Propellers / Propeller Guards    Fits iPad mini / Smaller Android Tablet    Protective Sleeve for Gimbal and Camera    Impact-Resistant, Watertight Hardshell

Dustproof and waterproof under IP67 rating – can be submerged in up to 3' for water for 30 minutes

Impact-resistant hard exterior shell

Gimbal sleeve encloses camera and gimbal in protective foam

Powerclaw latching system with sliding lock mechanism to prevent accidental opening

Eye hole for padlock

Related Questions and Answers

Q: 1. Does this fit the adjustment stand in it along with everything else?

A: Yes it does. Case opens up to 2 layers. Bottom fits controller and stand Top fits the ronin & 2 batts and smaller accessories. Well cut for everything.

Q: 2. Will this fit in the overhead bin of an airplane?

A: Yes

Q: 3. Does the stand also fit into this case?

A: Yes, fit

Q: 4. Does the foam below the drone body protect the gimbal in lieu of the cheap gimbal protector by DJI? My protector keeps breaking and I was wondering this foam replaces it. Thank you!

A: Yes. The foam insert of the Nanuk 945 Waterproof Hard Case for DJI Phantom 4/4 Pro/4 Pro+ & Phantom 3 will have a cut out to properly protect the gimbal unit of the drone.

Q: 5. Will this case fit the new stand and batteries that were updated by DJI?

A: Yes, this case should work with the latest accessories that come with the DJI Ronin-M.

Q: 6. It would be nice if this company gave more info on what this thing hold and if all the pieces need to be disablmed as well as a closeup shot of the inside. I'd like to know what this holds besides the Ronin-M. Does it hold the controller? Will it hold a monitor? Does the mounting plate need to be fully removed from the gimbal when in the case? Thank you

A: Nanuk actually has a very cool video on their website that shows you how to pack the Ronin-M in to this case. You do have to disassemble the Ronin-M, however it does hold the controller. Here is a link to the product page on Nanuk's website where you can find the video that shows this case in action.http://bit.ly/1o6v5lq

Q: 7. will this fit the new ronin-mx?

A: With the Ronin-MX just released 3rd Party Manufactures have not had a chance to make a case specifically for it. This case may not work. Please keep an eye on our website for new product releases. At this point your best bet will be to purchase a case with foam that you can customize to fit the Ronin-MX.

Q: 8. Do you need to disassemble the Ronin-M in order for it to fit in this case?

A: jip

Q: 9. Can you keep the propellers on and close the case? Also with the Phantom 4 Pro which is slightly higher than Ph4 and Ph3. Can it fit a CrystalSky 5.5 and battery?

A: I have closed the case with the propellers on and it seems to fit fine. However, I worry about possible deflection of the props if stored for a while, and the props are so easy to take off and put on with just a quarter turn, that I just prefer to always take them off.I'm not sure about the crystal sky, but the case has plenty of extra room to carve out foam to make additional items fit. Also, there is a pre-cut plug of foam adjacent to the opening for the controller that would appear to give about 3 inches more space for the monitor. My monitor is 3.25 inches tall and I think Crystal Sky is 5.25 inches? so there would be plenty of room. The case is extremely well made. I think it could drop down a staircase and protect the drone and accessories!

Q: 10. Will the Ronin MX fit in this case?

A: This case is designed specifically for the Ronin-M, it will not fit the Ronin-MX. A specific case for the Ronin-MX has not yet been released, so we are recommending a Porta Brace Hard Case with Foam. Please keep an eye on our website, we are hopeful that manufactures will soon be releasing cases designed specifically for the Ronin-MX now that it has been released.