The Bright Tangerine Titan Support Arm, in orange, introduces a new technology to articulating arms in order to better support monitors in cine applications. Instead of the common rosette-type center mechanism that immediately becomes floppy when loosened, the Titan Support Arm has a friction-based center mechanism supporting up to 17.5 lb. The arm measures 11" from end to end and comes with 1/4"-20 and 3/8"-16 endpoints while supporting optional interchangeable ones.

When you loosen or tighten the center joint, it does so gradually, and the arm articulates with a corresponding amount of friction. One advantage of this is that you won't accidentally loosen the arm to the point that your monitor flops and crashes against your camera. If the arm, for example, is three-quarters of the way tight, it will still keep its position when you let go, but it will also let you further adjust the position without having to loosen the center.

The reinvented design is based on a new center mechanism Bright Tangerine calls "core transmission technology." Approximately 2.5 tons of pressure is generated at the center point and distributed through pistons up the two segments of the arm to the ball bearings at the endpoints. The result is effective friction capable of handling the full payload of the arm.

Another highly useful feature of this arm is that the 1/4"-20 endpoint remains adjustable even after the arm is fully tightened. This allows you to fine-tune the position of your load after everything is set up. Although adjustable, this endpoint won't move on its own but rather only if you put pressure on it by hand. In this way, you can make adjustments as needed throughout the shoot without making any changes to the other settings of the arm. Additionally, the 1/4"-20 end also has a mounting disc to provide better support for your monitor when making these micro-adjustments and in general.

Other features of the Titan Support Arm include over-tightening protection, which ensures that there's no way to over-tighten the center joint. At a certain point, it locks and can't be tightened any further. Such a design also prevents over-torquing of joints and wear and tear. The Titan Support Arm is made of anodized aluminum with hardened, damage-proof stainless steel parts. While looking rich in appearance, it's also built to withstand harsh weather and on-set conditions.

Friction-Based Adjustment Cine Arm    17.5 lb Load Capacity, 11" Length    Interchangeable 1/4"-20 and 3/8"-16 Ends    Continuously Adjustable 1/4"-20 Endpoint

• Friction-based adjustment for cine applications
• 11" length
• 17.5 lb load capacity
• Interchangeable 1/4"-20 and 3/8"-16 endpoints
• 1/4"-20 endpoint is further adjustable even after the center is fully tightened

Related Questions and Answers

Q: 1. Is there a version with 1/4 screws on both ends?

A: We are planning to offer a additional 1/4 screw in the coming weeks, you can use any other manufactures 1/4 screw that can be easily fitted to the Titan arm.

Q: 2. Either end threaded?

A: The Bright Tangerine Drumstix 15mm Sterling Titanium Support Rods do not have threading on either end.

Q: 3. Curious, would this fit the Wooden Camera PL-E mount?

A: The Bright Tangerine Vocas E-PL Adapter MK II Support for Sony FX6 requires the Bright Tangerine Sony FX6 Top Plate Mark II and is unlikely it'll mount over a non Bright Tangerine adapter.

Q: 4. How much does this weigh?

A: The weight of the Titan is 530g or 18oz

Q: 5. Would this work with the Wooden camera RF to PL adapter? Or is there a better option.

A: The Bright Tangerine Vocas RF-to-PL Lens Adapter Support for RED KOMODO is not compatible with the Wooden Camera Canon RF to PL Mount Pro Lens Adapter for RED KOMODO/V-RAPTOR.

Q: 6. how much does it weigh?

A: The Bright Tangerine Morrissey 15mm LWS Lens Support with 1/4" Post weighs 0.44 lbs.

Q: 7. what is the measurement of the inner diameter?

A: The exact inner diameter is not specified by Bright Tangerine at the moment.

Q: 8. Will This fit Metabone EF to RF 0.71x speedbooster?

A: Unfortunately, the Bright Tangerine Canon 0.71x Lens Adapter Support for RED KOMODO does not list fitment of the Metabones T Speed Booster Ultra 0.71x Adapter for Canon Full-Frame EF-Mount Lens to Canon RF-Mount Camera.

Q: 9. Will This fit Canon EF to RF Drop-In Filter adapter?

A: The Bright Tangerine Canon 0.71x Lens Adapter Support for Komodo is specifically made to mount the Canon 0.71x Lens Adapter. It is not designed to support or fit other adapters.

Q: 10. would this work with the metabones FD to RF adapter (#MEFDEFRBT1) ?

A: No.