Avenview 4K Hdmi 2.0 Extender Over Fiber Optic Cable

Avenview 4k Hdmi 2.0 Extender Over Fiber Optic Cable

Product Code: eq70769
Availability: In Stock

$2,996.85 $4,465.31

Qty

13 reviews Write a review

Description
Reviews (13)

Avenview's FO-HDM4K-XX-MM 4K series fiber optic cable extends HDMI 2.0 digital signals up to 40 meters and supports up to 4K resolution. The fiber optic cable structure allows this 4K extender to transmit at high speed over long distance.

General
Device Type	Video/audio extender
Form Factor	External
Networking
Connectivity Technology	Wired
Optical Wave Length	850 nm
Max Resolution	4096 x 2160 @ 60 Hz
Max Transfer Distance	49 ft
Features	HDCP compliant, 4K resolution support, 7.1 channel audio support
Expansion / Connectivity
Interfaces	1 x HDMI
Miscellaneous
Cables Included	1 x fiber optic cable - 115 ft 1 x HDMI cable - 3 ft
Compliant Standards	RoHS
Power
Power Device	External power adapter
Power Consumption Operational	1.39 Watt
Manufacturer Warranty
Service & Support	Limited warranty - 3 years
Environmental Parameters
Min Operating Temperature	32 °F
Max Operating Temperature	104 °F
Humidity Range Operating	20 - 90% (non-condensing)
Packaging Info
Box Dimensions (LxWxH)	2.95 x 1 x 0.8"

High speed and long distance transmission by optical fiber
Compatible with HDMI 2.0
Supports up to 4K resolution
Main-link video signal / AUX data and hot-plug detection signal is transmitted by 1CH multi-mode fiber
MMF optical fiber /copper hybrid cable structure

Related Questions and Answers

Q: 1. Can I use this to convert the HDMI output of my video camera and feed it into the Zoom app on my Macbook?

A: Yes

Q: 2. Are there supposed to be 2 power supplies? One for the transmitter, one for the receiver?

A: No. Only one power supply is included since the units support 48V power-over-HDBaseT (PoH), allowing one unit to be powered by the other.

Q: 3. So is this card HDMI 2.0 not the same card as the one bundled with the latest DeckLink 4K Extreme 12G listed as HDMI 2.0b?

A: Yes, The Blackmagic Design Decklink HDMI 2.0 & Optical Fiber Mezzanine Card for Blackmagic Design is the card included with the DeckLink 4K Extreme 12G Capture & Playback Card bundle.

Q: 4. Will this work as a device to stream capture from the Dishanywhere app in the web browser or using Capture4me app ?

A: This will not allow you to capture a Dish Network or any other cable/satellite feed.

Q: 5. Will this embed the audio signal onto the HDMI without a video signal present?

A: A video signal must be present when using the KanexPro 4K HDMI 2.0 Audio Embedder.

Q: 6. What is the latency?

A: From the manufacturer. Regarding the latency for the HDM-C6IP-SET THE C6IP SET is an hdmi over IP Solution (minimal latency expected) Latency refers to a short period of delay (usually measured in milliseconds) between when a signal enters a system and when it emerges.

Q: 7. Hello... Does it work with Blackmagic Design Decklink 8K Pro.

A: The Blackmagic Design Decklink HDMI 2.0 & Optical Fiber Mezzanine Card for Decklink 4K Extreme 12G is meant to be installed as a component for the Decklink 4K Extreme 12G Main Board.

Q: 8. Will this also work with a deckling 8k pro?

A: No, System will only run off a Decklink 4K Extreme 12G unit only.

Q: 9. Is there any way to update the firmware on these? We're running into a bizarre issue with audio signal dropping

A: The micro USB port on the KanexPro 4K HDR HDMI 2.0 over Cat 7/6/5e Extender Set (18 Gb/s) can be used for utilities, including firmware updates.

Q: 10. I want to convert a HDMI out put from a Livestream hd 550 to a Ethernet input of a mushroom networks streamer, will this work?

A: the HDM-C6IP-SET is intended to work as a SET (Sender and Receiver). It depends on the Mushroom Network Streamer if it is able to decode the signal from the Sender connected to your Livestream HD 550.

Steve	17/08/2024
[RoHS] I haven't used them yet but they look first class. 5

Steve	17/08/2024
[RoHS] I haven't used them yet but they look first class. 5

Edward	05/07/2024
[External] It works like a charm and does everything it is supposed to do. I did not have a need for audio. 5

Tim	18/05/2024
[104 °F] Just note that this are single channels per box. So you essentially used the SDI output as an additional out which is nice and saves us a DA. Took a chance on an unknown player and happy to say they worked. These are the same guys that own lilliput (shared a booth at NAB at least) 5

Tim	18/05/2024
[104 °F] Just note that this are single channels per box. So you essentially used the SDI output as an additional out which is nice and saves us a DA. Took a chance on an unknown player and happy to say they worked. These are the same guys that own lilliput (shared a booth at NAB at least) 5

Tim	18/05/2024
[104 °F] Just note that this are single channels per box. So you essentially used the SDI output as an additional out which is nice and saves us a DA. Took a chance on an unknown player and happy to say they worked. These are the same guys that own lilliput (shared a booth at NAB at least) 5

Donald	13/05/2024
[1 x HDMI] Needed to connect desktop to monitor. Size just right. No negatives. 5

Donald	13/05/2024
[1 x HDMI] Needed to connect desktop to monitor. Size just right. No negatives. 5

marafy	12/05/2024
[1 x HDMI] easy to use 5

zippy	25/04/2024
[49 ft] Used to run a 40' hdmi line that was dropping out. This solved the problem and now the projector will pick up hdmi input. Absolutely no loss of signal at all. 5