Da-Lite Motorized Front Projection Screen 78X139"

Da-lite Motorized Front Projection Screen 78x139"

Product Code: eq7078
Availability: In Stock

$29,472.00 $41,260.80

Qty

8 reviews Write a review

Description
Reviews (8)

The Da-Lite Motorized Front Projection Screen 78x139"is unique in its design. It is manufactured to be installed during the construction phase of your media, class or board room. Afterwards, the fabric is added to complete the set-up. This stylish ceiling recessed screen is for those who don't want the screen showing when it is not immediately needed but available at the flip of a switch.

For easy installation, the Tensioned Advantage Deluxe is available with SCB-100 and SCB-200 (RS-232 serial control board) or Low Voltage Control unit built into the case.

Tensioned models are made with a thin vinyl surface that is stretched to assure a perfectly flat surface. Non-tensioned screens are fiberglass and not as taut as tensioned models.. Deluxe models have a door that opens and closes, Non-Deluxe models have a 2" slot.

Ceiling Recessed Tensioned 159" Diagonal HDTV Format 16:9 Aspect Ratio Cinema Perf High Contrast Finish Patented in-the-Roller Motor Quiet Operation Case Put in During the "Rough-in" Stage

Parameters
Type	None
Style	Advantage Deluxe
Front/Rear Projection	Front
Mount	Ceiling recessed
Tension Control	Tensioned
Keystone Control	Not Applicable
Dimensions	None
Overall Size	Not Specified by Manufacturer
Aspect Ratio	16:9
Masking Options	Black masking borders standard
Controls	None
Voltage	Door is 120VAC, 60Hz, 1.2 amp Screen motor is electrically operated 120 VAC, 60Hz, 1.4 amp
Control Options	Single motor Low Voltage Control(LVC) - external Single motor Low Voltage Control(LVC) - built-in electrical connections will be on right end of screen case on units with built-in LVCs Wireless Remote Control for LVC Radio Frequency Remote Infrared Remote Video Projector Interface - 12V or 5V Key Locking Cover Plate for 120V Switch or LVC Key Operated Switch for 120V only (NOTE: Cannot be used with LVC) 220/240 Volt (50Hz) Motor NET-100 Ethernet-Serial Adapter
Casing	None
Color	White
Material	Rigid aluminum
Length	166.25" (422cm)
General	None
Packaging Info
Package Weight	215 lb
Box Dimensions (LxWxH)	175 x 13 x 10"

Handsome white powder coated closure doors and case provide a clean look and allow easy installation of ceiling tiles

Front projection surfaces standard with black backing for opacity

UL Plenum Rated case

Related Questions and Answers

Q: 1. Is this for HD, 4K and/or 3D?

A: Yes, this material will support 4k/ 3D content.

Q: 2. Can this be used indoor too

A: Yes as long as you have the room to put it I have used it both inside and out. Awesome picture quality. Would buy again.

Q: 3. Does it come with stand / frame?

A: Yes, it comes with the frame.

Q: 4. what is the screen gain?

A: This screen uses their cine white material which has a gain of 1.1.

Q: 5. Does this come with additional support (ie., stakes) to prevent wind from toppling the screen over when using outdoors or does the screen not need additional support?

A: Yes, Elite Screens provides ropes and stakes to anchor the screen. For additional stability sandbags(sold separately) can be placed on the legs. As per the user manual ◆ Be sure to use the screen only during a light breeze; it is not meant to withstand heavy winds. *Elite Screens is not responsible for damages due to negligence resulting from misuse under weather conditions and will void your warranty.

Q: 6. What is the high from the base of the screen to the ground once setup?

A: The Elite Screens Yard Master 2 Front Projection Screen (58.8 x 104.6") BH #ELOMS120H2 offers a ground to the bottom of the screen height of about 24.1 inches

Q: 7. Can you project in front and rear?

A: You can not. It is only front projection.

Q: 8. Is the rear side of the screen blacked out (covered in black material) to limit the amount of light penetration?

A: Yes, the back of the screen is blacked out.

Q: 9. I'm looking at the Yard Master 2 (120). Can it be use with both front and rear?

A: This is a front projection screen only.

Q: 10. Is Yard Master 2 front projection screen 44.1x78.4 easy to transport?

A: Folded up in the bag, it's only about 33" x 11". It weighs only 20 lbs. It is easy to transport.

iJam	27/09/2024
[Rigid aluminum] From an installers point of view, this screen really is nice. Install a top and bottom rail and the screen slides over the rails for an easy installation. The screen snaps to the rear of the frame for a very tidy and clean cut appearance. High quality frame, packaged well, easy to install... a good deal all the way around. 5

anyonymous	19/08/2024
[175 x 13 x 10"] I use the Da-Lite Floor Model C on a stage for school presentations. It provides a quality solution where other screen mounting options ate not available. The screen is well supported and flat for a great presentation. The 9'x9' screen size is not excessively heavy or unwieldily to store. 5

haze_1	29/07/2024
[215 lb] I use it in a classroom at a university. It's got a great surface, brilliant white, big and more than I expected. It looks like a big LCD screen on the wall, way cool. 5

Doug	27/06/2024
[Tensioned] Looking forward to getting all of this stuff together 5

Andreas the squint	21/06/2024
[White] I used this screen in a small conference room and it was very simple to instal. 5

Simulator	11/06/2024
[Rigid aluminum] We purchased the Screen and the matching base. Easy to deploy, and rock solid. We used it under a canopy, for an interactive (laser based) Simulator, at a Senior Management Industry Conference. It is definitely a Professional grade tool - and was a key component of a successful exhibit. We did not expect to pay so much for the screen and base, not to mention the huge shipment costs - BUT, it was well worth the investment. The screen (and the base) are sturdy and we expect that it will provide years of service. 5

Cat5 King	16/04/2024
[White] This screen was installed in a small conference room with an NEC projector. The screen can be wall or ceiling mounted, and this flexibility came in handy when we had to switch to a ceiling mount at the last moment. The screen presents very well, and is unobtrusive when retracted. The tensioning system works nicely, and we didn't have to change any of the factory settings for the drop. I would have liked to see some additional mounting holes for attaching the screen to studs in the wall, so the installer has more options for wall mounting. 5

Kevin	30/11/-0001
[215 lb] The screen functions as described. we used the additional brackets to mount the screen to a concrete wall. The mechanical parts of the screen are smooth and easy to use! 5