Built specifically for use with the Angenieux EZ-1 and EZ-2 lenses, the Angenieux MSU-1 Cine Servo with 3 Motors & Wireless Modulefrom Angenieux MSU-1 Cine Servo with 3 Motors & Wireless Moduleis a removable lens drive unit that provides ENG-style control to the EZ-1 and EZ-2 cinema-style lenses. Built-in features you would expect to find on an ENG-style lens control grip, as well as a few extras, create a powerful combination when paired with your lens. The three lens drive gears are positioned to perfectly interface with your lens, and are 0.8 MOD to match the cine-style gearing. A run/stop button on the handle controls the camera, while the traditional zoom rocker is augmented by an adjustable speed control.

Further compatibility is ensured by the inclusion of Hirose and LEMO connectors. A built-in wireless module enables controlling the servo drive without a hard-wired connection. Those who wish to may control the servo with Canon or Fujinon standard ENG lens pan handles.

Removable ENG-Style FIZ Servo Handgrip    Camera Record Start/Stop    Zoom Speed Adjustment Knob and Rocker    0.8 MOD Drive Gears    Auto/Manual Iris Switch, Momentary Iris    12-Pin, 20-Pin Hirose Connectors    4-Pin, 6-Pin LEMO Connectors    Built-In Wireless Module    Compatible with ENG Lens Pan Handles

The MSU is self-aligning, mounting with three screws and a guide pin

• Auto Iris: on/off
• Rec: on/off
• Return video
• QZ (quick zoom)
• Iris: momentary
• Screen display
• Menu display

• System modes: analog demand, digital demand, wireless, local
• Iris control mode: auto/remote
• Wireless frequency select
• Firmware upgrade
• Trigger automatic calibration
• Lens data selection

Compatible with Canon & Fujinon standard ENG lens pan handles:

• 20-pin Hirose - analog and remote control
• 12 Pin Hirose - direct to lens port on camera
• 4-pin LEMO - "I" protocol communication
• 6-pin LEMO - MBUS port
• Cooke I System - real-time data transfer, no storage

A built-in wireless module permits interfacing with Movcam wireless lens controllers, selectable for iris, zoom, and focus

Via a 20-pin adapter cable (not included):

• Fujinon
• Canon
• Microforce

Via the 20-pin interface:

• Cmotion
• Preston
• ARRI

The motors have been optimized to provide high-speed motor drive while maintaining sensitivity and precision operation

• Zoom speed
• Q-Z switch
• information display
• VTR switch
• Function selector
• Display on/off
• Return switch
• Zoom operation switch
• Iris operation changeover switch
• Momentary iris auto switch

Related Questions and Answers

Q: 1. Will this work on my Angenieux Optimo Style 16-40?

A: Sorry, no. The Angenieux MSU-1 Universal Cine Servo with 3 Motors with Built-In Wireless Module B&H # ANMSU1 can only work with the new EZ line of Angenieux lenses. See the following link. https://bhpho.to/2nOmlBs

Q: 2. Does it have image stabilization, and if so how many stops?

A: No, the Canon CINE-SERVO 15-120mm T2.95-3.9 Zoom Lens with 1.5 Extender (EF Mount) does not have image stabilization support built in.

Q: 3. Are there Gears for focus zoom and iris? if so what pitch is each gear?

A: The Canon CINE-SERVO 15-120mm T2.95-3.9 Zoom Lens Kit with SS-41-IASD Servo (EF) (B&H# CAE15120EFK) has 0.8 MOD / 32 pitch focus gears and 0.5 MOD / 51 pitch gears on the iris and zoom rings.

Q: 4. What size clear lens filter fits this lens?

A: The Canon CINE-SERVO 15-120mm T2.95-3.9 Zoom Lens works with 112mm screw on filter sizes. A clear filter that would work would be - Haida 112mm NanoPro MC Clear Filter BH #HAHD3290

Q: 5. What is the zoom range?

A: Angenieux EZ1 30-90mm and EZ2 15-40mm T2

Q: 6. Which dial on the grip controls the focus motor?

A: On the bottom of the unit there are two switches to enable manual or servo control for both the focus and zoom. Change the focus switch to "S" for servo and change the zoom switch to "M" for manual. Use the rocker on the top of the unit to control focus.

Q: 7. Does this lens receive servo power the mount on a Canon C-500 MkII?

A: Yes, the Canon CINE-SERVO 15-120mm T2.95-3.9 Zoom Lens Kit with SS-41-IASD Servo (EF) receives power from the lens mount of a Canon C500 Mark II.

Q: 8. Can I connect this via LBUS to Arri cameras/RIA-1 to make use of the run/stop feature?

A: The Angenieux MSU-1 Universal Cine Servo with 3 Motors & Wireless Module for EZ-1/EZ-2 Lenses (B&H# ANMSU1) does allow for start/stop, and the ARRI Radio Interface Adapter RIA-1 Set (B&H# ARRIA1S) does offer start/stop control. However, no cable is included for making a connection to the 4-pin LBUS port on the RIA-1.

Q: 9. From an Amira to MSU-1, does this cable provide power?

A: For questions regarding Arri cameras please reach out to our Studio Sales team at TheStudio@BHPhoto.com

Q: 10. Any chance this would fit on a Fuji MK lens?

A: This product is designed for Angenieux EZ lenses. If you wish to have servo control with the Fuji MK lenses, please have a look towards Chrosziel Compact Zoom Control Kit for Fujinon MK Lenses B&H # CHCDMMKZ MFR # CDM-MK-Z. https://bhpho.to/2Ab9hR6