Simplify your multi-system workflow with the Smart-AVI 4-Port HDMI 2.0 KVM Switch USB Audiofrom Smart-AVI. The switch can manage up to four HDMI-outfitted computers using a single console, which includes a pair of HDMI-enabled monitors, a keyboard, a mouse, and a set of speakers and useful USB peripherals. With HDMI 2.0 support, the switch can deliver screen resolutions of up to 3840 x 2160 at 60 Hz. Additionally, it offers EDID video emulation support, which enables digital workspaces and screen resolutions to be saved for responsive reconnects.

To complete the multimedia setup, one 3.5mm audio output and four 3.5mm audio inputs are on board. Switching between your four systems can be easily accomplished via hot key commands or front-panel buttons. Moreover, the switch is equipped with a 2-port USB hub, allowing you to scan a document and save it in another computer.

Dual Monitor Support    8 x HDMI 2.0 Inputs    2 x HDMI 2.0 Outputs    2-Port USB 2.0 Hub    Resolution up to 3840 x 2160    3D Graphics Support    Hot-key Switching Support    Plug-and-Play Installation    EDID Video Emulation

Supports up to 3840 x 2160 @ 30/50/60Hz

Supports 3D

Supports LPCM, Dolby-AC3, DTS 7.1, and DSD/Dolby TrueHD/DTS-HD master audio

HDMI 1.3, 1.4, and 2.0 compatible

HDMI and HDCP compliant

Control up to four computers with a single KVM

EDID HDMI video emulation

Zero pixel loss with TMDS signal correction

Supports USB Keyboard/Mouse emulation

Supports USB 2.0 devices

Rack-mountable

Hot-key commands for quick channel selection

Independent (asynchronous) switching of KVM and peripheral USB ports (users can scan a document and save in another computer)

KVM emulation for error-free booting

Easy switching via front panel, RS-232, or hot keys

Made in the USA

Related Questions and Answers

Q: 1. So this device will add mic audio to the existing HDMI audio and combine both audio's in the HDMI output?

A: The MuxLab 4K HDMI 2.0 Audio Embedder can intake audio from the HDMI input, TOSLINK S/PDIF Input, or the 1/8" / 3.5 mm Aux/Line Input, and then merge it with the HDMI output.

Q: 2. Does this device extract audio from Apple Tv to output to amplifier via Rca Output?

A: Yes, the DVDO HDMI 2.0 Audio Extractor does support HDCP 2.2 and that is one of the requirements for the Apple TV. It should work.

Q: 3. Will the 3.5mm input power an attached microphone?

A: No, the KanexPro 4K HDMI 2.0 Audio Embedder's 3.5mm input can not power a microphone.

Q: 4. What is hardware revision of this switch?

A: We are unable to verify which hardware version a switch has. As we may have mixed inventory. And they are not sorted by version numbers.

Q: 5. Is there a possibility of video latency with this device? I've had the problem with a cheaper Amazon HDMI audio splitter.

A: Even with processing, the latency on the DVDO HDMI 2.0 Audio Extractor is minimal.

Q: 6. I have a dumb HDMI monitor, not a TV. Will this device extract the audio without audio feedback from the monitor?

A: The DVDO HDMI 2.0 Audio Extractor is capable of extracting 2 channel or 5.1 channel audio from an HDMI output device while still passing the audio with video over HDMI. To avoid feedback to external audio monitors, turn down to 0 on any audio from the source and destination display.

Q: 7. Is this USB switch bidirectional, For eaxmple will it route data from a scanner to either of two computers hooked up to it?

A: Correct, the IOGEAR 2x4 USB 2.0 Peripheral Sharing Switch will allow you to connect a scanner to either computer.

Q: 8. Can this device be used to connect turntable output rca to hdmi for 50 foot run to a receiver?

A: That would not be possible with the DVDO HDMI 2.0 Audio Extractor. If you want to combine the audio from your turntable, with a different video source and your turntable has a phono preamp built in, then you would want to use something more like BH #MU100527

Q: 9. Does the DVDO HDMI 2.0 Audio Extractor output Stereo Audio or 2 channels of Mono audio?

A: The DVDO HDMI 2.0 Audio Extractor will take the input and output it the way it came in, i.e., if it comes in as stereo, it will output it the same way.

Q: 10. Does the HDMI output still retain the full HDMI Audio output?

A: Yes it does. The Audio is still present on the HDMI output when using the DVDO HDMI 2.0 Audio Extractor.