3.5" 3G-Sdi Hdmi Lcd Electronic Viewfinder Laizeske

3.5" 3g-sdi Hdmi Lcd Electronic Viewfinder Laizeske

Product Code: eq71157
Availability: In Stock

$1,017.00 $1,403.46

Qty

29 reviews Write a review

Description
Reviews (29)

The 3.5" 3G-SDI HDMI LCD Electronic Viewfinder Laizeskefrom 3.5" 3G-SDI HDMI LCD Electronic Viewfinder Laizeskeis an efficient monitoring solution for camcorders or DSLRs having an SDI or HDMI output. This electronic viewfinder allows you to operate with the correct form factor for video; with the camera in-line to your rod system (the most stable way) and your eye in the viewfinder offset. In addition, the brightness, contrast, hue, and saturation can also be adjusted. It features a 3.5" TFT LCD screen attached to the viewfinder loupe. This LCD panel offers a native resolution of 800 x 480, and supports input resolutions up to 1920 x 1080. When viewing through the optical loupe, you can adjust the diopter by rotating the dial in either direction until the image becomes clear. This electronic viewfinder is suitable for both indoor as well as outdoor filming.

Parameters
Screen Size	3.5" (8.9 cm)
Resolution	800 x 480
Pixel Pitch (H x V)	0.0315 x 0.0945 mm
Aspect Ratio	15:9
Brightness	315 cd/m²
Contrast Ratio	800:1
Backlight	LED
Viewing Angle	80°/80° (L/R) 80°/80° (U/D)
Inputs/Outputs	Inputs 1 x HDMI 1 x 3G-SDI, BNC Outputs 1 x 3G-SDI, BNC 1 x 3.5 mm stereo headphone jack
Supported Resolutions	SDI 1080p 60/59.94/50/30/29.97/25/24/23.98 1080PsF 24/23.98 1080i 60/59.94/50 720p 60/59.94/50/30/29/25/24/23.98 576i 480i HDMI 1080p 60/59.94/50/30/29.97/25/24/23.98 1080PsF 24/23.98 1080i 60/59.94/50 720p 60/59.94/50/30/29/25/24/23.98 576p / 576i 480p / 480i
Picture Controls	Peaking focus assist, check field, camera mode, pixel-to-pixel, center marker, safe marker, image flip, image freeze, zoom-all, and U/D and L/R zooming
Mounting Interface	1/4"-20 thread socket
Operating Temperature	-4 to 122°F (-20 to 50°C)
Storage Temperature	-22 to 149°F (-30 to 65°C)
Power Requirements	6 to 18 VDC
Power Consumption	≤6 W
Dimensions	4.9 x 3.4 x 7" (12.4 x 8.8 x 17.9 cm)
Weight	12 oz (344 g)
Packaging Info
Package Weight	1.43 lb
Box Dimensions (LxWxH)	10.7 x 6 x 3.7"

3.5" TFT display with 800 x 480 native resolution and color reproduction for video monitoring

Audio monitoring via 3.5mm stereo headphone jack

3G-SDI and HDMI inputs, and 3G-SDI loop-through output

Wide viewing angles of 160°, both horizontally and vertically

Viewfinder loupe attached to the LCD can be flipped open

Optical loupe attached to the viewfinder body is completely detachable

Diopter can be adjusted when viewing through the optical loupe

Peaking focus assist (red highlight over parts of the monochrome image in focus)
Check field (red, green, blue, and mono) assists in adjusting the camera color settings
Camera mode function (full-screen mode)
Pixel-to-pixel with 1:1 mapping without scaling
Center marker
Safe marker (80%, 85%, 90%, 93%, 96%, and 2.35:1) for composition assist
Image flip (horizontal, vertical, and horizontal/vertical modes)
Image freeze
U/D and L/R zooming, and zoom-all mode
Custom color temperature

Related Questions and Answers

Q: 1. How do you keep it from fogging up? I put my eye on it and within 30 seconds the eye piece is all fogged up and I can't see.

A: Like with any eyepiece, the temperature and dew point of the atmosphere can fog devices like PORTKEYS LEYE III 4K HDMI 2.4" LCD Electronic Viewfinder BH #POLEYEIII • MFR #LEYE III. Here is one solution: ZEISS Anti-Fog Defender Lens Cleaning Kit BH #ZEAFDK • MFR #000000-2451-373

Q: 2. Will the diopter work with reading glasses?

A: Yes, the diopter can be adjusted to work with your reading glasses on the PORTKEYS LEYE III 4K HDMI 2.4" LCD Electronic Viewfinder.

Q: 3. Does this come with a D-Tap power cable like the other model?

A: The PORTKEYS LEYE 3G-SDI & HDMI 2.4" LCD Electronic Viewfinder does not include a DTap power cable. Please see the cable options below for powering the LEYE. PORTKEYS D-Tap to Locking 4-Pin Power Cable for BM5 Monitor (3.28') BH #POBM5DTAPPC https://bhpho.to/3JYfUID or Kondor Blue D-Tap to Canon LP-E6 Dummy Battery Cable (Kondor Blue, 16-36") BH #KODTAPCLPE6 https://bhpho.to/406kNF5

Q: 4. Can either the SDI port, or HDMI port be used as a video out signal to another monitor?

A: No, the Portkeys LEYE 3G-SDI & HDMI 2.4- LCD Electronic Viewfinder, only has HDMI and SDI inputs.

Q: 5. What are some suggestions to mount this to camera?

A: If you have a cage you could mount the PORTKEYS LEYE with the following. SmallRig Adjustable EVF Mount with Nato Clamp BH #SMD3507 • MFR #MD3507 https://bhpho.to/3VwbzPr Other options could be articulating arms. https://bhpho.to/3HU16K8

Q: 6. Will this EVF work with the C70 when recording 4K DCI? and if so, at what frame rates

A: This EVF only accepts a 1080p signal at up to 60fps. However you will be able to set most cameras, including the C70, to output HD only even while filming in 4K. You should still be able to use this EVF with the C70.

Q: 7. is it possible to use hdmi in and sdi out? is it a signal converter?

A: This has SDI, HDMI inputs and a SDI loop-through output. Yes, HDMI to SDI is possible.

Q: 8. Will this device work with the Red Komodo?

A: The PORTKEYS LEYE III 4K HDMI 2.4" LCD Electronic Viewfinder would work with the Komodo. However, You would need to work with an SDI to HDMI converter to connect it to the RED Komodo. Using and SDI viewfinder would be the correct choice. PORTKEYS LEYE 3G-SDI & HDMI 2.4" LCD Electronic Viewfinder BH #POLEYESDI

Q: 9. can you suggest a cable to power this from a D-Tap?

A: I would recommend this cable: Tilta D-Tap to 4-Pin LEMO-Type Cable (22.5") BH #TICBDTP4LE17

Q: 10. what battery does the Laizeske 3.5 3G-SDI & HDMI LCD Electronic Viewfinder use?

A: It uses the very popular and available Sony L type battery. Here is a Waston version and charger: Watson NP-F770 Battery Kit with Compact AC/DC Charger B&H # WANPF770CK.

Claiborne	26/09/2024
[315 cd/m²] We are using it to convert from a VGA adaptor / DA to a Black Magic Design switcher for webcast. Used the builtin menu to configure - Black Magic switcher would not show output till we used a separate monitor with variable inputs. 5

Claiborne	26/09/2024
[315 cd/m²] We are using it to convert from a VGA adaptor / DA to a Black Magic Design switcher for webcast. Used the builtin menu to configure - Black Magic switcher would not show output till we used a separate monitor with variable inputs. 5

Claiborne	26/09/2024
[315 cd/m²] We are using it to convert from a VGA adaptor / DA to a Black Magic Design switcher for webcast. Used the builtin menu to configure - Black Magic switcher would not show output till we used a separate monitor with variable inputs. 5

Ben	08/09/2024
[12 oz (344 g)] Used these devices to successfully convert SDI content from a Blackmagic ATEM switcher to several HDMI displays. Initial use of Blackmagic SDI/HDMI converters was not successful because the Blackmagic device did not convert the 59.94Hz refresh rate to 60Hz. The Gefen Scaler/Converter is able to do this. One note: You MUST change the Blackmagic ATEM to Level A output from its default Level B. This is on the General Configuration tab. 5

Ben	08/09/2024
[12 oz (344 g)] Used these devices to successfully convert SDI content from a Blackmagic ATEM switcher to several HDMI displays. Initial use of Blackmagic SDI/HDMI converters was not successful because the Blackmagic device did not convert the 59.94Hz refresh rate to 60Hz. The Gefen Scaler/Converter is able to do this. One note: You MUST change the Blackmagic ATEM to Level A output from its default Level B. This is on the General Configuration tab. 5

Ben	08/09/2024
[12 oz (344 g)] Used these devices to successfully convert SDI content from a Blackmagic ATEM switcher to several HDMI displays. Initial use of Blackmagic SDI/HDMI converters was not successful because the Blackmagic device did not convert the 59.94Hz refresh rate to 60Hz. The Gefen Scaler/Converter is able to do this. One note: You MUST change the Blackmagic ATEM to Level A output from its default Level B. This is on the General Configuration tab. 5