Designed to offer versatility and durability to tactical professionals, SureFire M613V Vampire Scout Light with Switch & Mountweapon light is outfitted with a 350-lumen output white light LED and a 120mW, 860nm invisible infrared (IR) LED. This dual output capability allows its use in conventional and stealth operations, with switching from IR to visible light accomplished with a twist of its self-locking selector on the bezel. A factory-focused Total Internal Reflection (TIR) lens optimizes the visible light's throw and produces a beam with a bright center, and a dimmer peripheral ring without holes or hotspots. Its regulated output is designed to maximize battery life and provide consistent beam intensity throughout the life of the battery.

This configuration of the Scout Light can be activated using the remote pressure pad switch, which enables fingertip activation while in the firing position, or the integrated push-button tailcap switch. The DS-SR07-D-IT dual pressure switch can be used to operate the Scout Light and a separately sold Advanced Target Pointer/Illuminator/Aiming Laser (ATPIAL). The light comes with an RM45 Picatinny/Weaver offset rail mount. This mounting bracket places the light to the side, and between, the rail which not only lowers the weapon's overall profile and reduces the snag hazard, but also eliminates the light's interference with other accessories such as optics, illuminators, grips, and iron sights. Its lightweight aluminum housing is anodized with a Type III hard coat for abrasion and corrosion resistance, and gasket-sealed for weatherproof performance -- making this tactical accessory ready for just about any situation or condition.

350-Lumen White Light LED    120mW, 860nm Infrared LED    1.125" Diameter Bezel    Total Internal Reflection (TIR) Lens    Tailcap/Dual Pressure Pad Switch    Momentary/Constant-On Modes    Weatherproof, O-Ring and Gasket-Sealed    RM45 Offset Picatinny/Weaver Rail Mount    Type III Hard-Anodized Aluminum Body    Runs on Two CR123A Batteries

• Dual output: Visible and infrared (IR)
• 350-lumen white light output
• 120mW, 860nm invisible IR output
• Total Internal Reflection (TIR) lens system produces a smooth pre-focused visible beam of light without holes or hotspots; beam has a large center of bright light and long throw, with a generous spill to maintain situational awareness
• IR LED output is compatible with most NVD devices and scopes and provides a wide area of invisible illumination
• Rotating self-locking selector on the bezel changes output from visible to IR, eliminating the need for accessory filters that can get lost or broken
• Digitally regulated output maintains consistent beam intensity throughout life of battery

• Type: Push button and remote cable touchpad
• Location: Tailcap, and 7" cable for precise placement based on personal shooting style
• Momentary-on only for remote touchpad
• DS-SR07-D-IT dual pressure switch operates Scout Light and separately sold Advanced Target Pointer/Illuminator/Aiming Laser
• Momentary and constant-on switch on tailcap provides switch redundancy
• System disable to prevent accidental activation during transport and storage, or when strict light discipline must be maintained

• 1.125" diameter bezel
• RM45 Picatinny/Weaver offset rail mount places the light to the side of the rail for a smaller profile, reduced snag hazard, and to avoid interference with other accessories like scopes, sights, illuminators, or iron sights
• Lightweight aluminum housing
• Scratch- and corrosion-resistant black Type III hard-anodized finish
• O-ring and gasket sealed for weather-resistance
• Tempered impact-resistant glass lens window
• Powered by two CR123A lithium batteries
• Weight: 6.5 ounces with batteries

Related Questions and Answers

Q: 1. Will this work with Omni Sony UWP-D16?

A: The Sony lav would be too big for this clip. Here's a universal vampire clip option BH #POVCLIPBL.

Q: 2. Will these work for the Sennheiser ME2 as well?

A: According to Sennheiser, this will fit the ME2/ME2-II very nicely.

Q: 3. Will this fit the Sennheiser ME 2-II lav?

A: Thank you for your question. This unit will not fit the ME-2. i recommend using B&H # SEZH102.

Q: 4. what size allen wrench is needed to mount the picatinny light mount?

A: According to the user manual for the SureFire Dual Fuel Turbo Scout Light Pro Weaponlight, they suggest using a flathead screw driver to tighten the screw and not an allen wrench.

Q: 5. Will this work with something like the Countryman EMW?

A: Yes, the LMC Sound CMTVPRBK C Mount Vampire Clip Universal Lavalier Mount should be capable of use with the Countryman EMW Omnidirectional Lavalier Microphone. Although compatibility is not specifically stated, the EMW has a 6.6mm measurement that is within the stated mic head size of 5-7mm compatible with the CMTVPRBK, and also has a similar form factor to other microphones stated as compatible such as the Tram TR50.

Q: 6. Can Surefire tape switch be used with this light without an adapter??

A: The SureFire Dual Fuel Scout Light Pro Weapon Light (Black) will need this SureFire DS00 Waterproof Switch Assembly for Scout Light Weapon Lights (Tan) in order to be used with the tape switch: https://bhpho.to/2F1Qw4m

Q: 7. Will these work with any lav mic?

A: The ZH102 was designed for use with Sennheiser's ME 2 and MKE 2 mics, but it can be used with other mics that are a similar size.

Q: 8. whats the equivalent Watt output?

A: depends on the speed-light used

Q: 9. How reliable is this?And can we map the focus throw to whatever degrees we want? i.e. a lens with a 240 degree throw we can map it to 90 degrees on the thumbwheel?

A: Very! And by that I am assuming you mean repeatable. It's also extremely solidly built, so it won't just break down into bits while you use it. Mine had a bit of motor jitter, which annoyed me. But Redrock support was extremely helpful and pointed out to me that you can in fact control the amount of torque on the motor so I managed to dial it down to a point where I am now extremely happy with the responsiveness.Regarding remapping the throw of your lens, it actually works the other way. No matter what the throw of your lens, the Scout will remap it to 270 degrees. It would have been cool if they allowed us some control on the remapped angle, but in practice I have seen it doesn't really matter, because most of the time you don't really rack focus from infinity to the minimum distance your lens supports. You only need half that ability in most cases, and even less if you are following some form of action, like a dance or a group of actors etc.

Q: 10. Want to confirm, does this utilize the switch system so I can use a bowens flash head on them? I know they say switch but don't see it mentioned int he description at all.

A: That is correct. This unit ships with the Speedlite inserts, however you can change to a Bowens mount, or any other Switch insert.