The SmallHD 5.5" FOCUS OLED HDMI Monitorcombines the accuracy of an OLED display with the ability to power select DSLR and mirrorless cameras. Viewable even in full daylight, this onboard monitor's 350 cd/m² bright 1920 x 1080 OLED panel is crisp enough for pulling focus, and features a single micro-HDMI input. Load custom LUTs and access focus and monitoring tools like waveform, false color, and vectorscope using the touchscreen interface.

Powered by a single Sony L-series type battery (not included), this versatile monitor can also supply power to select cameras when used with a separately available adapter cable. Display features include 2x and 4x pixel zoom, multiple anamorphic de-squeeze functions, false color options, image overlay, and up to 8-channel audio metering.

A Tilt Arm is included with the monitor for mounting to your camera's accessory shoe or 1/4"-20 threaded hole. The FOCUS OLED's rubberized plastic form includes three 1/4"-20 threaded mounting points. Additional features include SD card storage, a 3.5mm stereo headphone jack, and a low 5.76W power draw.

5.5" 1920 x 1080 Touchscreen Display    Micro-HDMI Input    350 cd/m² Brightness    60,000:1 Contrast Ratio    160° Viewing Angle, 402 ppi Panel    3.5mm Camera Power Output    L-Series Battery Mount    SD Card for Image Capture/Overlay & LUTs    3.5mm Stereo Headphone Jack    Includes FOCUS Tilt Arm with Shoe Mount

• Supports up to UHD 4K video
• SD card slot for loading custom LUTs
• Wide color gamut display
• 2x and 4x pixel zoom
• 1.33x, 1.5x, 1.66x, and 2.0x anamorphic de-squeeze
• Automatic/manual image flip and rotation
• Waveform, zebra, and vectorscope
• Preset and custom frame guides

A micro-HDMI connector is used to display up to a UHD 4K signal. A micro-HDMI to HDMI type A cable, a micro-HDMI cable, and four cable clips are included with the monitor.

An output port enables you to power your camera directly from an NP-F L-series battery mounted on the monitor, increasing runtimes over the standard batteries of many DSLR or mirrorless cameras.

Attach the FOCUS OLED monitor to your camera's shoe or 1/4"-20 thread using the included FOCUS Tilt Arm. The Tilt Arm enables 180° of tilt for convenient monitoring, and incorporates a cold shoe.

Related Questions and Answers

Q: 1. Is this monitor compatible with UHD at 25p ? Becouse in technical paper it says Supports UHD-1 4K at 30/29.97 @ RGB 444 8bit, YCC 444 8bit, YCC 422 12 bit & 24/23.98 @ RGB 444 10/8 bit, YCC 444 10/8bit, YCC 422 12 bit, YCC 4:2:2, 8/10/12 bit color in RGB & YCC 4:4:4 , but not 25p (the european frequency)

A: According to SmallHD it does not. For UHD the only frame rates listed are 30, 29.97, 24 and 23.98. However it does accept PAL frame rates in HD frame rates and in general cameras that shoot UHD are able to output HD only even while shooting UHD. You will still be able to us this monitor with PAL cameras.

Q: 2. Can I use Sony's EX 1 batteries to power up this monitor?

A: Unfortunately the monitor does not accept Sony BP-U batteries. This monitor is powered by Sony NP-F batteries.

Q: 3. Does this have a dc port so I can connect via D-tap?

A: To power this monitor through a battery with a D-Tap Connection you will need the SmallHD D-Tap to L-Series Dummy Battery Cable (32"), B&H # SMDTSLFB. This is the solution you need. https://bhpho.to/2VPOjRC

Q: 4. Can the monitor be used for focusing and will all the camera (Nikon D5) focusing features be retained while taking videos?

A: This monitor has its own selection of focus and exposure tools that you would use when shooting with the Nikon D5.

Q: 5. Country of origin of the small hd 5.5 oled SDI monitor?

A: The country of origin for this Monitor would be the Unite States of America.

Q: 6. Can the SD card be used for recording images?

A: The SD Card allows for Still Image Capture to be used as a comparison Overlay and for loading LUTs.

Q: 7. Is this monitor compatible with Nikon D810?

A: Yes it is.

Q: 8. Why is this monitor 350 nits brightness compared to the Focus LCD which is 800?

A: We are not aware of the exact reasons behind why a product is designed the way it is. SmallHD did not design this monitor with a bright panel.

Q: 9. Can you only power this via attached battery? I want to use d-tap from my v mount battery.

A: Along with a NP-F style battery you can also use the SmallHD D-Tap to L-Series Dummy Battery Cable (32") to power this monitor form a V-Mount Battery with a D-Tap Port, B&H # SMDTSLFB. https://bhpho.to/2JgCYDv

Q: 10. Is this small hd oled 5.5 monitor compatible with the teradec ace 800 receiver?if not on which monitor the SDI hdmi signal on the teradec ace 800 compatible to

A: Yes, this monitor is fully compatible with the Teradek Ace 800.