The Edimax GS-1008PHE V2 is an eight port Fast Ethernet switch with four PoE+ Ports designed for use in home, small or medium sized network environments. With four DIP switches, PoE ports can be manually set with on/off control, extending PoE delivery distance up to 200 meters and port-based on/off control for VLAN and QoS is also supported. The switch easily connects and supplies power to PoE-enabled devices such as wireless access points, network cameras and IP phones as well as other Ethernet-enabled devices such as computers, printers or network attached storage (NAS). The compact size and fan-less design make the switch an ideal solution for expanding home and small business networks.

• Eight 10/100/1000Mbps gigabit ports and four PoE+ ports
• IEEE 802.3af/at PoE compliant (ports 1 - 4) for simplified deployment and installation
• Up to 30W per PoE port (total power budget: 60W) for powering PoE-enabled devices
• Auto-detection of powered devices (PD) and power consumption levels
• Hardware DIP switch for "Standard" and "Extend" mode selection; the "Extend" mode features 30-watt PoE transmit distance of 200m at speed of 10Mbps
• Port-based VLAN and loop protection features
• Supports 802.1p quality of service (QoS)

Features four IEEE 802.3at Power over Ethernet (PoE+) ports which supply up to 30 watts of electricity per port. It can convert standard 100-240V AC power into low-voltage 50 - 57V DC electricity to power IEEE 802.3at compliant network accessories via existing LAN cables. With PoE detection capability, the GS-1008PHE V2 is able to verify whether the connected device is IEEE 802.3at compliant. In the event that a PoE device is not detected, only network data will be transmitted through the LAN cable - meaning easy setup and management of network devices such as access points and network cameras.

The unique CCTV-mode DIP switch function is ideal for surveillance networking environment. Switching all DIP switches to on enables CCTV mode which gives multi-function PoE + data extension, Port Isolation and QoS on the GS-1008P V2. When using video surveillance systems for homes, business or institutions, the CCTV mode provides better speeds for multicast viewing and easier installation. Setting all DIP switches back to off quickly changes the GS-1008P V2 back to normal for general-use data transmission.

The built-in DIP switch provides extended operation modes on switch 1 & 2. The GS-1008PHE V2 operates as a "standard" IEEE 802.at/af PoE Switch when DIP switches are off. With switches on, the GS-1008PHE V2 operates on a per-port basis at 10Mbps duplex operation but can support 30-watt PoE power output over a distance of up to 200 meters, overcoming the 100m limit on Ethernet UTP cables. With this feature, the GS-1008PHE V2 provides an additional solution for 802.3at/af PoE distance extension and saves costs of Ethernet cable installation.

The GS-1008PHE V2 features port-based VLAN where ports can be isolated from each other via DIP switch port 3. This can help to prevent IP camera's multicast or broadcast storms from affecting each other.

Supports 802.1p QoS via DIP switch port 4. This ensures first priority for video and voice traffic.

Just plug Ethernet or PoE enabled devices into the switch. Data and power can be transmitted through existing standard Cat-5e Ethernet cables with no additional cables or configuration required. The GS-1008PHE V2 reduces the difficulty, time and cost of network setup.

A fast and effective solution when power outlets are unavailable for your network devices. The switch additionally supports IEEE 802.3az Energy Efficient Ethernet which allows for less power consumption and reduced costs during periods of low data activity.

A fan-less design ensures quiet operation and enables an even more compact design, keeping valuable desk space free in home or small office environments.

Related Questions and Answers

Q: 1. I need a poe switch to transmit my nvr video feed to several locations. does this switch support hdmi over ethernet?

A: Yes, this Netgear GS308EP 8-Port Gigabit PoE+ Compliant Unmanaged Switch will support the HDMI. The setup usually is that the cameras will connect to the switch, the switch to the NVR, the NVR to HDMI splitter (per monitor), to HDMI over Ethernet extender, to each monitor.

Q: 2. What power adapter can I use with the USW-Flex Switch? I think the PoE-50-60W. Yes?

A: Yes, that is correct.

Q: 3. On the 8 port passive POE switch, could you power a POE device and a POE+ device?

A: The Ubiquiti Networks US-8 UniFi 8-Port Gigabit PoE Compliant Managed Switch can only supply PoE power via its single PoE passthough port.

Q: 4. what software do i use to manage this switch.? can it be managed via web browser with an IP address?

A: As others have already said, you would need the UniFi controller.

Q: 5. Can you power a NSM5 nanostation with a USW-Flex?

A: Yes, the Ubiquiti Networks UniFi Switch Flex 5-Port Managed Gigabit PoE Network Switch can power the Ubiquiti Networks airMAX NanoStationM 5 GHz Outdoor Router.

Q: 6. Can an individual POE port on this switch be scheduled to turn on and/or off automatically (based on a schedule that you setup)?

A: Unless scheduling has been added as a feature in the Unifi Controller, PoE status can not be scheduled. It is either on or off, with additional features such as indicating whether passive or active PoE and such.

Q: 7. Does it support RADIUS?

A: No, the Netgear GS308EP 8-Port Gigabit PoE+ Compliant Managed Switch does not support RADIUS.

Q: 8. Can it deliver power to the UAP-AC-LITE UniFi Access Point?

A: Yes, the Ubiquiti Networks UniFi Switch Flex 5-Port Managed Gigabit PoE Network Switch BH #UBUSWFLEX can power a single UAP-AC-LITE.

Q: 9. Can two of these switches be daisy chained and if so does it have AutoMdix capability or is a Patch style cable required?

A: The Netgear GS308EP 8-Port Gigabit PoE+ Compliant Managed Switch features auto-MDI/MDIX.

Q: 10. Can I use poe ports to pwr the UAP-AC-PRO-E? If so how far can the cable be before there is a problem. The poe is for pwr and Data correct? The poe ports are 802.3af and that is what the AP says if needs.

A: Yes, the power rating has to be correct but yes!