Compatible with most FlashForge and third-party 3D printers, the aluminum FlashForge 1.75mm Metal-Filled Filament Aluminum 1kgfrom FlashForge 1.75mm Metal-Filled Filament Aluminum 1kgfeatures a metal powder infused within the filament, which provides a metallic finish. This filament has a diameter of 1.75mm and operates at print speeds ranging from 60 to 90mm/s and printing temperatures of 365 to 428°F.

1.75mm Filament    Provides a Metallic Finish    Printing Temperature: 365 to 428°F    Printing Speed: 60 to 90mm/s

Related Questions and Answers

Q: 1. what size is the allen wrench for that tiny set screw? I have about 50 of these windscreens and I'm very satisfied with their effectiveness except for that set screw

A: Per a Shure representative, the hex key required is a #2 .9mm or .035".

Q: 2. this sistem wont fit my standard 19 rack. is there a bigger link bar?

A: The link bar is only used to attach 2 ULX/SLX series receivers together for rack mounting. This is not used to mount to the rack. You will need the additional rack ears compatible with your series of receiver.

Q: 3. When used as a saddlebag over the large leg of a c-stand, is there clearance between the bottom of the bag to the ground? How does it fit as a saddlebag over the other legs of a c-stand?

A: No, when put over the largest leg of a c-stand it touches the ground, which reduces it's usefulness. It works, but as you know, if they hangs instead of sit on the ground, sand bags are more effective. As an alternative, I wrap it around the pole so that it effectively is stretching across two of the legs which works well (and has ground clearance). If you want to hang them on a single leg go with the 15s and double up.

Q: 4. Do these 20 lb black sandbags have a 20 lb on them?

A: The Impact Filled Saddle Sandbag (20 lb, Black) is filled and is 20 lb.

Q: 5. Why isn't there a 10 lb version?

A: The manufacture makes the Impact Filled Saddle Sandbag (5 lb, Black) and in that style 15 lb. But in the same brand for 10lb it is this one, https://bhpho.to/3PHMukK.

Q: 6. does this mean that there are 6 bags 15 lbs each?

A: The Impact Filled Saddle Sandbag (15 lb, Orange, 6-Pack) comes as pack of 6 sandbags and each of them is 15lbs.

Q: 7. What type of material does the bag come prefilled with?

A: The sandbag is filled with sand.

Q: 8. What counts as one saddle bag? Is the one bag made of two compartments?

A: Yes.

Q: 9. What weight bag is best for the hollywood c stand?

A: There is no specific recommended sandbag weight for C-stands. Ultimately, it would depend on the total load you are placing on the C-stand. It would be good to have a similar weight of sandbags on the base of the light stand as the weight of the item on the top of the light stand. (However, personally, you can never have too many sandbags, especially from a safety standpoint).

Q: 10. Does the bag come prefilled?

A: Yes