The 19.6' Comica XLR to USB-C Audio Interface Cable for Androidaudio-interface cable is used to record sound from a dynamic microphone or a battery-powered microphone into an Android smartphone or a computer. The cable is compatible with Comica VP2/VP3 shotgun microphones, HRM-C handheld mic (for interviews), and similar microphones from other brands.

The cable is terminated with a female XLR connector on one end and a USB Type-C connector at the other.

Record XLR Microphone to Android Device    For Dynamic or Battery-Powered Mics    USB Type-C Connector for Android

Related Questions and Answers

Q: 1. This Mixer, have a 48 Phanton volt?

A: Yes, this will provide phantom power (48volts)

Q: 2. Why is the headphone output of the mic so low but the system audio normal?

A: The headphones you are using with the XLR-USB-48 may require more power which can be achieved by using a headphone amplifier such as the Polsen HPA-4X2 (B&H # POHPA4X2) to provide more volume. You can find additional options for headphone amps listed under the "Accessories" tab.

Q: 3. Does this interface have direct monitoring(hear myself in my headphones)?

A: Yes, the Elgato Wave XLR Microphone Preamp and USB Audio Interface has a 3.5mm TRS headphone jack for direct monitoring,

Q: 4. what is a Polsen audio interface?

A: This devices allows connection of your XLR microphone to the USB input of your computer for recording purposes.

Q: 5. Will this work with a Rode Video Mic, that I want to plug into my Iphone 12?

A: Yes, but not directly; you need to also get the Rode SC4 conversion cable: https://www.bhphotovideo.com/c/product/1048151-REG/rode_sc4_trs_to_trrs_adaptor.html?sts=pi&pim=Y

Q: 6. mr18 have deesser plugginn

A: thank you for your question. This unit does not have a primary deesser effect available but you can achieve a similar effect but a combination of EQ and compression.

Q: 7. Will this work between a mixing board and an android smartphone? Using an auxiliary output from the mixer

A: No, this cable is intended for connecting a dynamic microphone with the input on a smartphone. Since you will be connecting the output from a mixer, which is a louder line level signal (not mic level), you will need to use an attenuator (level matching) cable that will pad the line level signal from the mixer and make it compatible with the mic level input on a smartphone. If you will be connecting from a mixer's XLR output, you will want to send both the left and right output signals so you will need a cable like the Sescom SES-43DB-# 43 dB Pad DSLR Attenuating Line to Mic Level Cable - 18" (B&H # SES43DBMZ2XJ) combined with a USB-C adapter such as the Apple USB Type-C to 3.5mm Headphone Jack Adapter (B&H # APMU7E2AMA) to convert the 3.5mm TRS plug to USB-C. If you have other output options on the mixer, such as RCA (Tape output), you can use the Sescom SES-43DB-# 43 dB Pad DSLR Attenuating Line to Mic Level Cable - 18" (B&H # SES43DBMZ2P). Please

Q: 8. How does this differ from the Behringer XR-18? And does this use the same software?

A: The Midas MR18 is made from higher grade components, offering the quality sound Midas is known for; though the software, functionally, will be the same. Granted, you would want to get the m-air app instead of the x-air app with the MR18.

Q: 9. Will this work with an Android or iPhone recording program?

A: The Polsen XLR-USB-48 XLR to USB Audio Interface is intended for use with computers running Mac OS or Windows. It is not intended for use with mobile devices like Android smartphones or iPhones.

Q: 10. Should the plastic cover half way down the silver top of the device be removed?

A: No