Protect your investment with the orange and white Matrice 200/210 Fruity Chutes Parachute with Sentinel Triggerfrom Fruity Chutes. This lightweight parachute system is engineered with a 100mW radio and allows for automatic or manual deployment, providing your Matrice 200 or 210 with a nice gentle landing. Manual triggering is possible via the Skycat Rescue Radio system, which has an independent power supply. Automatic deployment is handled via the Sentinel triggering system, which can detect a variety of drone failures in as little as 0.5 seconds. Parachutes are ejected via a high-energy compressed spring so you can take the system with you to any location. You can even be conveniently folded and packed by the user for multiple uses without requiring shipment to the manufacturer.

For DJI Matrice 200/210 Drones    Automatic or Manual Deployment    Take Anywhere, Spring-Based Ejection    100mW Radio with Nano Receiver    Automatically Deploys in 0.5 Seconds    1000 lb Parachute Break Strength    Does Not Require Drone Power    Repack & Reload Yourself    Can Be Used Multiple Times    66" Iris Ultralight Parachute

If something goes extremely wrong during flight, the Sentinel triggering system is there to automatically step in and save the drone. The system can detect if the drone suddenly falls, rolls, or flips. Detection happens in as little as 0.5 seconds, which equates to roughly 6' of free fall. Typically, the chute will deploy before a pilot notices there's an issue. The Sentinel system has its own 500mAh battery, so the chute can be deployed even if the drone experiences a complete power failure.

Running off a 915 MHz signal to avoid interference with other devices, the 100mW radio transmitter and TBS Nano receiver gives pilots the ability to manually trigger the parachute in the event of an emergency, such as a flyaway. The chute can be deployed manually from up to five miles away, making it ideal for BVLOS (Beyond Visual Line of Sight) situations. The transmitter is designed to mount easily onto your controller, or on your belt/pocket with an included belt clip.

A carbon fiber Harrier launcher is used to eject the parachute by utilizing a high-energy compression spring. This allows the parachute to be ejected out and away from the drone quickly while having no regulatory or transportation limitations.

This Fruity Chutes parachute does not rely on the drone to operate. The entirely self-contained system means it can protect your drone even in the event of power failure.

The Iris parachute weighs only 2.62 oz, yet it can provide a gentle landing to drones that weigh between 7 and 11 lb, allowing them to land at a rate of 15 feet per second. If needed, the parachute can also land drones up to 27 lb or more. The parachute uses eight shroud lines that are each rated at a 200 lb break strength. The parachute bridle uses 1000 lb Spectra material, and the overall break strength of the chute is approximately 1000 lb of pull force.

There's no need to send your parachute back to the manufacturer after every deployment. The system is designed to let you refold, repack, and reload the parachute multiple times. A parachute rigger jig is included to help you quickly and easily fold the parachute properly.

Nearly everything you need to attach the parachute system to your drone is included. All you need to provide are simple tools. The parachute is designed to mount next to the battery to minimize its impact on flight. To help take the stress out of installation, online tutorials and other resources are available to walk you through the process.

Related Questions and Answers

Q: 1. How does this mount to my 70-200 and 500mm lenses?

A: You would need RucPac 1/4" Screw Strap D-Ring in order to attach the strap to your lenses 1/4-20 threads.

Q: 2. The strap holds the heavy camera at one point only. Will the camera strong enough to have all the weight at one point only?

A: According to the manufacturer it was tested to hold over 100kg or 220lbs. If you have a large lens attached you might want to attach the strap to the lens and not the camera strap eyelets.

Q: 3. Does the DJI Matrice 30T (Plus Combo) include hard cover case?

A: Yes, the DJI Matrice 30T Enterprise Drone (Plus Combo) includes a hard carrying cse.

Q: 4. Is the underarm strap really of any benefit?

A: Yes it keeps the strap from rolling forward and backwards, but if it is not comfortable for the way you use your camera, you can remove it if need be.

Q: 5. Does this battery work with Ronin 4D?

A: No, the DJI TB55 Intelligent Flight Battery for Matrice 200 Series Drones is not compatible with the DJI Ronin 4D. For the Ronin 4D, you will need the DJI TB50 battery, B&H # DJI2P5TIFB.

Q: 6. Does RucPac have the 1/4-20 'D' ring to attach a heavy lens mount or does this need to come from another maker?

A: The RucPac Sentinel Camera Strap (Black) does include a 1/4"-20 D ring.

Q: 7. Why doe the photos show items not included, such as the "snoot", and why a bag 'without wheels' instead of "wheeled bag" listed?

A: Photos most of the time come direct from the manufacture and kits change all the time. The list on the lower right of the product page is what the kits come with.

Q: 8. How many batteries can the 30 series battery station charge and or carry ?

A: The DJI Matrice 30 Series Intelligent Battery Station (NA) can carry and charge up to four pairs of TB30 Intelligent Flight Battery.

Q: 9. When placed on a Matrice 200. Will I be able to see views from any of the 3 cameras with the go app?

A: Hey Gerald. You can only see a maximum of 2 camera views at the same time.

Q: 10. Is it compatible with M210 v2?

A: Yes it will.