The AQUATECH EVO III Water Housing for Canon 1D Xfrom AQUATECH EVO III Water Housing for Canon 1D Xlets you capture the action on and under the surface with your Canon EOS-1D X series DSLR camera. The polyurethane housing comes equipped with a standard left grip and a "palm stopper" on the right, and they can be switched to suit your needs. There's one shutter button in the customary location for landscape shooting and another on the bottom for vertical holds, and both offer the same half-press for focus and full-press to shoot function as the camera itself.

Quick release clips and tactile controls are made of stainless steel and aluminum. All the aluminum parts have been anodized for resistance to corrosion and other wear and tear. A flash bulkhead sync connector, supplied with AquaTech flash housings, enables the EVO III to work with separately available accessories such as external strobe units and pocket wizards. A threaded 1/4"-20 mounting point at the bottom of the housing enables connection to an optional tripod or tray. The enclosure ships without a required lens port and accepts a series of ports for a wide range of lenses. For complete compatibility information, see the Port Chart.

Depth Rating: 33'    Portrait & Landscape Shutter Controls    Access to Important Camera Functions    Ergonomic Design with Side Handle    External Rubber Eyepiece    Interchangeable Lens Port system    Ships without Required Lens Port    Compatible with M3 Pistol Grip

• Depth Rating of 33'
• Designed for shallow water and surface use, and shouldn't be operated at depths beyond 15' for more than 5 minutes
• Quick release clips with safety latch

• Full left-side grip and "palm-stopper" right grip (can be swapped)
• Dual electronic shutter releases mimic half-press focus camera function
• Tactile mechanical push button and knob/dial controls provide easy access to important camera functions including AF-on, record start/stop, video/stills switch, Q-menu, menu multi-controller left/right, set button, zoom in, playback, AF point selection, rear
• Compatible with separately sold M3 Pistol Grip

• Body crafted from durable black polyurethane
• Controls made of stainless steel and anodized aluminum
• Self-locating back plate via stainless steel pins for precise alignment
• 1/4"-20 tripod mount

• Ships without required lens port
• Accepts P-series ports for a wide range of lenses
• For complete compatibility information, see the Port Chart linked above

• Flash bulkhead sync connector, supplied with AquaTech flash housings, provides compatibility with flash units and pocket wizards
• Housing ships without the required sync cord

Related Questions and Answers

Q: 1. Does it fits the GFX50s ii?

A: Yes, this AquaTech EDGE Pro Sport Housing for FUJIFILM GFX-100s (Gray), will be compatible with the Fujifilm GFX 50s II

Q: 2. Will this work with the Sony A7IV?

A: The AquaTech EDGE Sports Housing for Sony a7R IV, a1, a7S III, or a9 II is NOT compatible with the Sony a7 IV. You need to get the AquaTech Edge Sport Housing for Sony a7 IV. Here is the link: https://bhpho.to/3GFAQAK

Q: 3. Hi! I know that the Iphone 13 pro max and the iphone 12 pro max are the exact same size, so does it work for both?

A: Yes, the AQUATECH AxisGO 12 Pro Max Water Housing for iPhone (Deep Black) will also fit the IPhone 13 Pro Max. The fitting space on the case is 77 x155mm.

Q: 4. Will this housing except any other Fujifilm bodies? Do you supply different Fujifilm back plates and body mounting plates for the Edge system?

A: The AquaTech EDGE Base Water Housing for FUJIFILM X-T4 is specifically for the XT4 Fuji only and cannot be adapted to other models.

Q: 5. Will the same housing work for both the 1DX mark II and 1DX mark III?

A: Yes the EVO III Housing will accommodate either the Canon EOS 1DX Mark II or Mark III bodies.

Q: 6. Does this work with the iPhone 13 Pro (note: I mean 13 Pro, not 13 Pro Max)?

A: No but this one is recommended for the iPhone 13 Pro: https://bhpho.to/3yKghRq

Q: 7. does it fit both r5 and r6?

A: AquaTech EDGE Base Water Housing for Canon R6 (Orange) will only fit the Canon EOS R6. AquaTech EDGE Base Water Housing for Canon R5 (Orange) BH #AQ10323 • MFR #10323 is for Canon EOS R5.

Q: 8. Will an A7IV fit/work in this housing?

A: According to Aquatech, the AT Base for the A7III, A7SIII, A7RIII, A7RIV, A9/A9II is not compatible with the A7IV.

Q: 9. I see there is a manual zoom mechanism, is there a way to also manual focus the lens?

A: We do not offer manual focus gear. If you're using Sony lenses and cameras, you can set focus with autofocus, and then use the camera to put the lens into manual focus. It is not possible to rack focus manually however.

Q: 10. Hi, I know that the Iphone 12 pro max and the 13 pro max are the exact same size so does it work with both?

A: The AQUATECH AxisGO 12 Pro Max Water Housing for iPhone (Deep Black) is incompatible with the iPhone 13 Pro Max. Instead, get the AQUATECH AxisGO 13 Pro Max Water Housing for iPhone 13 & 14 (Tropical Teal), B&H # AQAG13SHTTL.