The black Countryman I2 Acoustic Guitar Mic Kit with Hirose Connectorfrom Countryman I2 Acoustic Guitar Mic Kit with Hirose Connectoris a mic that has been built from the ground up for smooth frequency response, low noise, and precise polar patterns with deep nulls and natural on- and off-axis response. It can be used to capture natural audio for this instrument.

The I2 microphone is suitable for distance miking that is invisible in front of audiences and on camera. This version features increased sensitivity for distance miking and positions the acoustic guitar mount and pickup on the center hole of this instrument. In addition, the 5' cable is hardwired to the mic and terminates with a 6-pin Hirose connector for direct connection to Samson TX3, UT5, and UT6 wireless bodypack transmitters.

Hypercardioid Polar Pattern    For Instruments and Sound Reinforcement    Hardwired Connector    Natural On & Off-Axis Frequency Response    For Uncolored Recordings    Reduced Feedback Issues

The I2 maintains excellent pattern control and frequency response at all angles. It offers uncolored recordings and reduced feedback issues.

Flexible close miking techniques are aided by the instrument mounts, which position securely and gently on the instrument for capturing audio.

Small size and sonic precision makes this microphone suitable for X-Y, M-S, and other techniques that rely on accurate, coincident positioning and consistent patterns.

The hypercardioid polar pattern has a narrower pickup pattern in its front than the cardioid polar pattern. It offers better rejection of ambient noise and the working distance is about twice that of the omni polar pattern. The hypercardioid has a small "pickup lobe" directly behind the microphone and exhibits maximum rejection areas behind and to the sides (about 60 degrees away from the rear of the microphone on either side) of the mic. The hypercardioid pattern works best when the loudest unwanted sounds—like speakers—can be positioned in these nulls.

Related Questions and Answers

Q: 1. Hello is really possible to record stereo? I have tested SmartRig+ with 3,5 connector and adapter 3,5 to lightning. It is possible to record only mono mixed from two channels with this setup. Thanks for reply.

A: Yes, the SmartRig+ allows you to toggle between mono and stereo modes using a switch that is located between the two XLR-1/4" combo input jacks. The switch is labeled with "M" and "S" to indicate mono and stereo operation.

Q: 2. Is this compatible with the NP-L7S type battery? Trying to power my soundevices 664. I'm not sure the cup is big enough to fit the NP-L7S. Any help is much appreciated. Thanks

A: The PSC battery cup will support an NP-L7S battery.

Q: 3. Does this unit have any mounting holes on the back, to attach to a rig if using for microphone input to an iPhone?

A: The Saramonic SmartRig+ Di has a 1/4''-20 thread on the back of it.

Q: 4. Does this work with Sound Devices MX-Hirose?

A: Yes, the PSC NP-1 Battery Cup with 4-Pin Hirose Connector is compatible for use with the Sound Devices MX-HIROSE Hirose DC Input Sled for MixPre, MixPre-M & MixPre-II Mixer-Recorders.

Q: 5. Can you use this for audio input on a live-stream?

A: Yes, the Saramonic SmartRig+ Di can be used to connect microphones and/or instruments for live-streaming audio.

Q: 6. What are the dimensions of the mount? I have roughly 1.5" of space between the bridge and end of the string, and I want to make sure it will fit my violin.

A: The specific dimensions of the I2 Violin Mount in the Countryman I2 Violin and Viola Microphone Kit are not provided by the manufacturer, however, this mount should work well in your scenario. Please see images of the mount in action in the product brochure here for reference: https://bhpho.to/3Io5aiC

Q: 7. Sled accomodate a Powerextra NP-F750/F770

A: The PSC NP-1 Battery Cup with 4-Pin Hirose Connector is designed to accommodate "NP-1" style batteries and will not also accommodate the form factor of the Powerextra NP-F750/F770 batteries.

Q: 8. Can this be used with a Blue Yeti microphone?

A: The Blue Yeti is not stand mountable unless using the Blue Radius shockmount.

Q: 9. Does this microphone include the flute mount?

A: Yes. The flute mount is included as a part of this kit.

Q: 10. Would this device work to take a call on whatsapp? To make a live broadcast by reporters/journalists? Thanks!

A: That would depend on if WhatsApp allows real-time audio monitoring through Lightning. It should, but you might want to contact WhatsApp's support to verify.