The black Countryman I2 Acoustic Guitar Mic Kit TA4F Blackfrom Countryman I2 Acoustic Guitar Mic Kit TA4F Blackis a mic that has been built from the ground up for smooth frequency response, low noise, and precise polar patterns with deep nulls and natural on- and off-axis response. It can be used to capture natural audio for this instrument.

The I2 microphone is suitable for distance miking that is invisible in front of audiences and on camera. This version features increased sensitivity for distance miking and positions the acoustic guitar mount and pickup on the center hole of this instrument. In addition, the 5' cable is hardwired to the mic and terminates with a TA4F connector for direct connection to Telex LT wireless bodypack transmitters.

Hypercardioid Polar Pattern    For Instruments and Sound Reinforcement    Hardwired Connector    Natural On & Off-Axis Frequency Response    For Uncolored Recordings    Reduced Feedback Issues

The I2 maintains excellent pattern control and frequency response at all angles. It offers uncolored recordings and reduced feedback issues.

Flexible close miking techniques are aided by the instrument mounts, which position securely and gently on the instrument for capturing audio.

Small size and sonic precision makes this microphone suitable for X-Y, M-S, and other techniques that rely on accurate, coincident positioning and consistent patterns.

The hypercardioid polar pattern has a narrower pickup pattern in its front than the cardioid polar pattern. It offers better rejection of ambient noise and the working distance is about twice that of the omni polar pattern. The hypercardioid has a small "pickup lobe" directly behind the microphone and exhibits maximum rejection areas behind and to the sides (about 60 degrees away from the rear of the microphone on either side) of the mic. The hypercardioid pattern works best when the loudest unwanted sounds—like speakers—can be positioned in these nulls.

Related Questions and Answers

Q: 1. Can you use this for audio input on a live-stream?

A: Yes, the Saramonic SmartRig+ Di can be used to connect microphones and/or instruments for live-streaming audio.

Q: 2. How do you attach a B6 mic to this clip? I have not seen any pictures of how to do this.

A: The cable goes into the little grabber on the top of the clip. This one is for the B3 though. The version for the B6 is here: https://www.bhphotovideo.com/c/product/295893-REG/Countryman_E6CLIPB1_E6_B6_Replacement.html

Q: 3. Does this microphone include the flute mount?

A: Yes. The flute mount is included as a part of this kit.

Q: 4. Hello is really possible to record stereo? I have tested SmartRig+ with 3,5 connector and adapter 3,5 to lightning. It is possible to record only mono mixed from two channels with this setup. Thanks for reply.

A: Yes, the SmartRig+ allows you to toggle between mono and stereo modes using a switch that is located between the two XLR-1/4" combo input jacks. The switch is labeled with "M" and "S" to indicate mono and stereo operation.

Q: 5. Will this ear piece work with the Sennheiser IEM receiver packs?

A: This should work with a Sennheiser IEM receiver pack.

Q: 6. Will this work with the Cisco Webex Meetings app on iOS?

A: According to Saramonic's marketing team, the SmartRig+ is not recognized by the Cisco Webex Meetings app on iOS. The iPhone does recognize the SmartRig+ when it is used to connect your external microphone, but once the Webex app is loaded, it is no longer recognized. Although the SmartRig+ is not compatible with the Webex app, it does work with Zoom.

Q: 7. Does this work with DPA microphones?

A: Yes, the Deity Microphones DA4 can be used with DPA microphones. The DA4 is an adapter that can be used with any Microdot-equipped microphone and it converts the Microdot connector to a TA4F plug for connection to a wireless microphone transmitter with a TA4 input jack.

Q: 8. Does anyone know if it is possible to send a Line Level signal into this unit?

A: Absolutely YES. It has XLR & 1/4" combo and 3.5mm inputs, so for line-level choose the 1/4" or 3.5mm inputs and use the level controls to dial in the level you desire.

Q: 9. Can this be used with the Cisco Webex Meetings app on iOS? Will it output and input audio at the same time?

A: According to Saramonic's marketing team, the SmartRig+ is not recognized by the Cisco Webex Meetings app on iOS. The iPhone does recognize it when used to connect your external microphone, but once the Webex app is loaded, it is no longer recognized. While the SmartRig+ is not compatible with the Webex app, it does work with Zoom.

Q: 10. Can this be mounted to a spring boom arm?

A: The reflection filter in this kit would be too heavy to put on a studio arm with a microphone. I would suggest the Auray RF-PBO-16 Premium Reflection Filter (Plastic/Black), BH #AURFPBO16. This moel is much ;lighter, at 3.5 lbs., and made of rugged ABS plastic, with High-Density Open-Cell Acoustic Foam to absorb unwanted ambient room sound.