The light beige Countryman E6 Directional Earset Mic, Low Gain, TA4F Connectoris a vocal microphone with an adjustable boom that weighs less than one tenth of an ounce and is designed to be used by only one person. Once adjusted, it will continually hold this shape.

The E6 earset can be used on either ear for capturing audio and rejecting unwanted sound, feedback, or surrounding noise from stage monitors or nearby speakers in houses of worship, theater, and outdoor vocal and speech applications.

The low-profile, directional E6 earset virtually disappears against the skin, so performers will forget they're wearing a mic. This version offers the lowest gain for the most powerful vocals that require the highest overload. Additionally, the earset comes with two pattern-changeable protective caps for maximum isolation and gain before feedback. This directional E6 earset's cable terminates to a TA4F connector for direct connection to Paso MW223 wireless bodypack transmitters.

For Stage, Theater, and Broadcast TV    Fits Paso Transmitters    Headroom for Strong Vocals    Detachable 2mm Diameter Cable    Stiff, Steel Boom    Includes Windscreen    2 x Protective Caps    Black and White Single Tie Cable Clips    Carrying Case

The Countryman earsets are very small, lightweight, and the least visible headworn microphones.

The classic E6 is a good choice when one person will wear the microphone. Because the boom is stiffer, it can be adjusted to fit, then stored away and quickly reworn.

The E6's stainless steel boom is tough and can be bent and re-bent to fit different performers. It is highly resistant to makeup, sweat, and moisture when used with the supplied protective caps. The earset should always have a protective cap in place to keep sweat, makeup, and other foreign material out of the microphone.

The E6 earset's flexible boom is easily shaped right on the performer's face. Changeable protective caps let you shape the frequency response for different situations or to match other microphones. The directional earset protective caps adjust the pattern from cardioid to hypercardioid.

Easy adjustment keeps the mic in a comfortable position for rejecting unwanted sounds. The directional E6 earset provides more isolation and is suitable for situations where there are loud monitors, extreme feedback, or environmental noise.

The included removable, quick-swap cable detaches from the actual earset, making it completely replaceable in the event of a short or break. The replaceable cable design makes upgrading wireless microphone systems easy as they are available in a wide selection of connections to accommodate most wireless transmitters.

Related Questions and Answers

Q: 1. how many microphones can connect too this ?

A: This antenna can receive signal from any number of active transmitters within range (based on the antenna's position and gain settings) that are transmitting between 470698 MHz. To clarify, this item's purpose in your wireless setup is to act as an extension of your receivers which, when properly placed and configured according to your application, can improve your transmitter(s) signal reception. However, it should be noted that your receivers are the devices that are actually connecting (or syncing) with your transmitters to interpret the captured signal of each active wireless microphone or bodypack. Thus, any limitations in number of transmitters you are able to use simultaneously would be based on the capabilities and coordination of your receivers rather than the number or type of antennas you are using.

Q: 2. Would this mic work for iphone 7 plus?

A: I bought one for my iPhone 5s and it worked but there was less than a 1 decibel improvement over the phone by itself In my opinion it was not worth my investment. I don't even use it.

Q: 3. Most demonstrations of the Rode VideoMic Me emphasize audio for closeups--either selfies or interviews. How will the mic work at greater distance from the sound source--10 feet, for example?

A: Just like any other mic, John. Camera mounted mics, boom mics...any mics sound better when you are closer and worse when you are further away. The Rode video mic does have an interference tube to help block out sound from the side, which does help. It's WAY better than the little pinhole mic in the phone. When I get further away, I use a lavalier mic. I do have a long cord, but I prefer to plug the lavalier into a small Zoom audio recorder, which fits in the pocket. Then I snyc up the sound in post. Otherwise, I keep my subject close up.

Q: 4. I just bought a Letv Le1 pro x800, it's the second phone of the company. It works on EUI, an operative system whose base is Android. Does anyone see any reasons why the mic wouldn't be working on this phone??

A: Unfortunately without testing the units we would be unable to confirm, however from specs available, the unit features a TRRS jack for headphone/mic and should work properly.

Q: 5. I understand the VideoMic Me is designed for devices where the camera is on the opposite side from the audio input jack. I have a Galaxy S5 (which has them on the same side) - would it be possible to make it work if (hypothetically) I could find a short TRRS extension cable?

A: By using a cable you will still be feeding audio into your smartphone but keep in mind the TRRS jack on the VideoMic Me is also the physical connection point that holds the mic onto the phone.

Q: 6. The unit says this is good for 470-698 MHz. The headline says 470-900. Please, what is correct?

A: The Shure UA874WB Wideband Active Directional Antenna (470 to 900 MHz), BH # SHUA874WB, is designed for UHF signal reception extending from 470 to 900 MHz.This is also documented in the user guide. Please note the "WB" (Wide Band) designation on page 3/4: https://www.bhphotovideo.com/lit_files/1096710.pdf

Q: 7. Does anybody have any experience with using the video mic me with apps like FaceTime or phone calling?

A: I use it for Periscope, worked great....

Q: 8. I understand that the VideoMicro is designed for on camera use.But I would like to know whether or not the Rode VideoMic Me works with a Canon EOS M by using a TRRS to TRS cable. For example by using this?a href= http://www.bhphotovideo.com/c/product/1048150-REG/rode_sc3_trrs_to_trs_adaptor.html target= _blank http://www.bhphotovideo.com/c/product/1048150-REG/rode_sc3_trrs_to_trs_adaptor.html/a

A: you can buy one of those shorter trrs to trs cables and then when you attach it to an sl1 like i have, yo can make a custom grip to hold it... its a slimmer looking profile and with the extra space from the extension you can add a wind filter. its an overall slimmer profile and it works... you just need to figure out a way to make sure it holds and i just simply made a custom cnc piece for mine

Q: 9. Will it fit on a galaxy s6 active

A: Yes

Q: 10. If I am placing my receiving units relatively near the transmitters and using a snake box to the mixer is there a need for this antenna? It was included in my quote - possibly unnecessarily. Thanks.

A: No, in the situation as you describe the antenna is not necessary.