The light beige Countryman E6X Earset Mic for Sony Wireless Transmittersis a versatile blend of the E6 and the E6i earset that features a springy, thin earpiece and a flexible boom and is suitable for use when a few people will be using the same mic.

The E6X earset can be used on either ear for capturing audio and rejecting unwanted sound, feedback, or surrounding noise from stage monitors or nearby speakers in houses of worship, theater, and outdoor vocal and speech applications.

The low-profile, directional E6X earset virtually disappears against the skin, so performers will forget they're wearing a mic. This version offers the highest gain for general speaking such as presentations or sermons. Additionally, the earset comes with two pattern-changeable protective caps for maximum isolation and gain before feedback. This directional E6X earset's cable terminates to a 4-pin Hirose connector for direct connection to Sony DWT-B01, DWT-G01, DWT-S01, and DWT-V01 wireless bodypack transmitters.

For Stage, Theater, and Broadcast TV    Fits Sony Transmitters    Headroom for General Speaking    Detachable 2mm Diameter Cable    Versatile, Flexible Boom    Includes Windscreen    2 x Protective Caps    Black and White Single Tie Cable Clips    Carrying Case

The Countryman earsets are very small, lightweight, and the least visible headworn microphones.

The E6 Flex or E6X offers a versatile blend of the E6 and the E6i. With a springy, thin earpiece and a flexible boom, the E6 Flex is secure on the ear and fast to fit without compromising true invisibility and sound.

The E6X's stainless steel boom is tough and can be bent and re-bent to fit different performers. It is highly resistant to makeup, sweat, and moisture when used with the supplied protective caps. The earset should always have a protective cap in place to keep sweat, makeup, and other foreign material out of the microphone.

The E6X earset's flexible boom is easily shaped right on the performer's face. Changeable protective caps let you shape the frequency response for different situations or to match other microphones. The directional earset protective caps adjust the pattern from cardioid to hypercardioid.

Easy adjustment keeps the mic in a comfortable position for rejecting unwanted sounds. The directional E6X earset provides more isolation and is suitable for situations where there are loud monitors, extreme feedback, or environmental noise.

The included removable, quick-swap cable detaches from the actual earset, making it completely replaceable in the event of a short or break. The replaceable cable design makes upgrading wireless microphone systems easy as they are available in a wide selection of connections to accommodate most wireless transmitters.

Related Questions and Answers

Q: 1. Has anyone compared the Polsen ESM-1-TA4 Single-Sided Earset Microphone for Shure Transmitters to the Pyle PMEMS10... do they sound similar, dramatically different, level about the same?

A: While we have not compared the Polsen ESM-1-TA4 Single-Sided Earset Microphone for Shure Transmitters directly against the Pyle Pro PMEMS10 Omni Earset Microphone for Shure Wireless Transmitters, based on specifications and user reviews, the Pyle appears to edge out the Polsen in overall quality. It has a wider frequency response and is more commonly used with many positive reviews.

Q: 2. Does it require 48V phantom power?

A: No, the Polsen ESM-1-MN Single-Sided Earset Microphone does not require 48V of phantom power, it requires 1.5 to 5V of plug-in power which can be supplied through the 3.5mm mic input on many recorders or cameras, as well as by the 3.5mm jack on certain computers.

Q: 3. which airline micro wireless to go with at zip code 25560?

A: It doesn't really matter you can pick whatever frequency block you want. It only matters if you start running multiple systems at the same time.

Q: 4. Will the receiver on this work with remote antennae?

A: Yes it will. Depending on what you want to do, you may need to get an antenna distribtion/splitter such as the Sennheiser ASA 214 (for multiple systems), and/or use low loss 50ohm cables for runs in excess of 50'

Q: 5. I'm wondering if I bend it to be used on the other ear if the microphone will break? It's currently set up for the left ear.

A: The boom on the Polsen ESM-1-35H Single-Sided Earset Microphone is flexible and adjustable, so it should not break if you bend it to curve for use on the right ear.

Q: 6. does this come with ta4f or ta3f connector?

A: The Polsen ESM-2-TA4F Dual-Sided Earset Microphone for Shure Transmitters has a TA4F connector.

Q: 7. Wil this system work in Australia?

A: No, unfortunately, none of the Samson AirLine Micro Wireless Earset Systems that we sell operate on frequencies that are available for use by wireless microphones in Australia. You can use wireless systems that operate on the 2.4 GHz frequency band in most areas of the world. For example, the Samson XPDm Digital Wireless Omni Headset Microphone System - 2.4 GHz (B&H # SAWXRDM1BDE5) is a compatible option, as is the Samson XPD2 Headset USB Digital Wireless System (B&H # SASWXPD2BDE5) which has a USB receiver and can connect directly to a computer or used with USB power for connection to other devices through the 3.5mm output (headphone jack). For more details on specific wireless frequencies for wireless microphone use in Australia, refer to this page from the Australian Communications and Media Authority which provides useful information as well as a link to channel guides for selecting frequencies for use in specific regions of Australia: https://www.acma.gov.au/wireless-microphones

Q: 8. How do I determine best frequency choice, K1, K2 or K3?

A: Hello, Thank you for contacting Samson Technologies. We can determine this based off your zip code. Please email us at info@samsontech.com and we can assist you in finding the best option of Airline Micro to go with. If you have any other questions or inquiries, please let me know at any time. Best Regards, James

Q: 9. Dumb question, would this work if I plugged this into an average aux port?

A: Whether you are referencing an Aux In port or an Aux Out port it will not work because mic signal is much lowerl than line level signal like from a headphone output for example. Because of that, the ESM-1-MN would only be compatible with a microphone input.

Q: 10. Is this receiver rack mountable?

A: The Sennheiser XSW 2 Wireless Combo System with Handheld Mic & Senal Earset Mic (A: 548 to 572 MHz), BH # SEXSW2835AX (B&H Kit), is rack mountable (1/2 rack space) via the included rack mount kit.