The DaLite Fast-Fold Velour Drapery Kit for Deluxe Frames is a great way to add a touch of professionalism to your presentation. The drapery system provides a neat and "finished" look to the screen. It is a 16 oz, fire retardant cotton velour drapery that attaches with snaps to Fast-Fold screens to enhance the image and assure that your audience's attention remains fixed where it should be.

Fire Retardant    Without Adjustable Skirt Bar    Without Poly Case    Gray

Fully pleated for finished professional look

Standard colors available include black, blue and pewter gray

Complete kit contains a valance bar, 14" valance drape, wing bars, 30" wide wing drapes and a 45" long skirt

Related Questions and Answers

Q: 1. Can the power output be controlled remotely? I want to mount this about ten feet high so I don't want to have to lower it to adjust the output.

A: Yes, the power can be controlled by the Skyport Transmitter.

Q: 2. Is there any official document or patch that is offered with this backdrop to reflect the FR rating? I can not find anything.

A: The Liba Fabrics Flame Retardant Velour Background (Black, 10 x 15') BH #LI2110D15 meets NFPA 701 Certification.

Q: 3. Will this strobe work the following: Impact Luxbanx Duo Small Strip Softbox (12 x 36 )?

A: Hi,Your best bet is to ask the team that sells Impact. They most likely sell a ring for their soft boxes that works with Elinchrom.Regards,Will H

Q: 4. Will D-Lite 400W/s Flash Heads connect with pocketwizard TT5 transceivers?

A: I would have to say yes. Just for the fact I do have this light and I use the pocket wizards on them. The TT 5, since it is a transceiver will transmit the signal to the light and allow it to activate, all you have to do is connect the cords from the transceiver to the light.I have not done it myself with the TT 5, but I am sure it will work. There should be connecting cords that came with the TT 5, if not B & H photo has them on stock. Just ask anyone in the lighting department and they will direct you to the proper cord that you will need to make things work. Let me know if this information helps you.

Q: 5. what's the best white balance for Elinchrom D-Lite 400W/s RX 4 Flash Head ?

A: Hi,Your best bet is to do a custom white balance in your camera. If you wish not to perform that function than set the white balance to the flash symbol.Regards,Will HBrand Manager Lighting, MAC Group US

Q: 6. Do you know the size an weight of the whole packaging set box?

A: Box Dimensions (LxWxH)15.0 x 8.5 x 7.0 weight 3.5 pounds.

Q: 7. Can the optic slave function be turned on and off? I want to use this light kit in a place where we will have 3 portrait stations in an open area near by and don't want other portrait stations setting off this set.

A: The optical slave in this monolight can be switched off.

Q: 8. What single airport check-in capable bag would you recommend for this light setup?

A: Hi,Look at the Tenba series of bags. Transport Rolling Tripod/Grip Case 38-inches BlackThere is also a 48 bag too! The bags are part of the Tenba Transport Series.I hope this helps.Regards,Will H

Q: 9. Can these be used as continuous light as well?

A: The Dlite has a modeling light but it would not be a recommended use of it to be used for video.

Q: 10. How do you keep the modeling lamp on. As soon as I take a photo, the modeling lamp goes off. I'm using the Elinchrom EL19366 Skyport Transmitter?

A: Hi,If you check your instruction book you will see how to control the modeling lamp.Here is the item you are inquiring about.Setup Visual-Flash-Control (VFC) modeProportional modelling lamp setup (PMS) Enter VFC setup :1. Press Prop push button for more than 2 seconds, until the display shows F.X (X is 0 or 1) toenter into the Modelling lamp setup menu.2. Use the Flash-Power up and down button to change setting:- F.0: Visual-Flash-Control = OFF. Modelling lamp remains ON after flash.- F.1: Visual-Flash-Control = ON. Modelling lamp switches off during recharging.3. The display switches back to normal mode after approx. 4 seconds if no button is pressed. Thesettings are automatically stored.4. Standard setting is F.0, VFC = OFFI hope this helps.Regards,Will H