The light beige Countryman E6 Omnidirectional Earset Mic Low Gain 2mm Cableis a vocal microphone with an adjustable boom that weighs less than one tenth of an ounce and is designed to be used by only one person. Once adjusted, it will continually hold this shape.

The E6 earset can be used on either ear for capturing audio and rejecting unwanted sound, feedback, or surrounding noise from stage monitors or nearby speakers in houses of worship, theater, and outdoor vocal and speech applications.

The low-profile, omnidirectional E6 earset virtually disappears against the skin, so performers will forget they're wearing a mic. This version offers the lowest gain for the most powerful vocals that require the highest overload. In addition, the earset comes with three protective caps with different high-frequency response characteristics that control the amount of crispness or sibilance (response at 15 kHz). This omnidirectional E6 earset's cable terminates to a 3.5mm locking connector for direct connection to Sky UT86P wireless bodypack transmitters.

For Stage, Theater, and Broadcast TV    Fits Sky Transmitters    Headroom for Strong Vocals    Detachable 2mm Diameter Cable    Stiff, Steel Boom    Includes Windscreen    3 x Protective Caps    Black and White Single Tie Cable Clips    Carrying Case

The Countryman earsets are very small, lightweight, and the least visible headworn microphones.

The classic E6 is a good choice when one person will wear the microphone. Because the boom is stiffer, it can be adjusted to fit, then stored away and quickly reworn.

The E6's stainless steel boom is tough and can be bent and re-bent to fit different performers. It is highly resistant to makeup, sweat, and moisture when used with the supplied protective caps. The earset should always have a protective cap in place to keep sweat, makeup, and other foreign material out of the microphone.

The E6 earset's flexible boom is easily shaped right on the performer's face. Changeable protective caps let you shape the frequency response for different situations or to match other microphones. This omnidirectional version includes three protective caps—+4 dB (bright), +8 dB (very bright) and +0 dB (flat)—that controls the amount of crispness or sibilance (response at 15 kHz.)

Easy adjustment keeps the mic in a comfortable position for rejecting unwanted sounds. The omnidirectional E6 earset provides more isolation and is suitable for situations where there are loud monitors, extreme feedback, or environmental noise.

The included removable, quick-swap cable detaches from the actual earset, making it completely replaceable in the event of a short or break. The replaceable cable design makes upgrading wireless microphone systems easy as they are available in a wide selection of connections to accommodate most wireless transmitters.

Related Questions and Answers

Q: 1. Will this cable work with BH Part # MOEXOBGSE?

A: Yes, the Mogan 2mm Replacement Microphone Cable for Sennheiser Wireless Transmitters is a compatible replacement for the original cable included with the Mogan Elite Omni Earset Microphone for Sennheiser Wireless Transmitters.

Q: 2. I recently lost the cable to my S8100. The original also charged the battery while it was plugged into my computer's USB port. Will this do the same?

A: Yes; the Nikon UC-E6 USB Cable (4.5') is the replacement USB cable that was originally included with the purchase of the Nikon CoolPix S8100 Digital Camera.

Q: 3. Will it work with newest Canon EOS R50?

A: No, the ZILR USB Type-C to Canon LP-E6 Dummy Battery Cable is incompatible with the Canon EOS R50 Mirrorless Camera (Black) since the camera accepts the Canon LP-E17 Lithium-Ion Battery Pack and not the Canon LP-E6NH Lithium-Ion Battery (7.2V, 2130mAh) style battery. Consider the Bescor LP-E17 Dummy Battery with USB Type-C Connector Kit. See the link below: https://bhpho.to/3xSqytB

Q: 4. Does this cable work with batteries having a p-tap connector? Are d-tap and p-tap compatible or exactly the same?

A: If I'm not mistaken, D-tap (named after the shape) and P-tap (abbreviated from PowerTap) are the same connector and interchangeable. In my experience, D-tap is the more common nomenclature in the UK, whereas P-tap is more common the US (and probably Canada). The only other variety I know of is Blueshape's B-tap which is propriety and a different shape.

Q: 5. im using this headset with a Clear Com AB-120 broadcast box and am having issues getting it to function correctly. when i press the talk button the microphone immediately works but only for a couple seconds and with deteriorating levels over those 2 seconds. like the plates charge and then discharge but thats it. Any thoughts on this would be a great help? Thank You.

A: I strongly suggest contacting Sennheiser and Clear Com for wiring schematics (if available) so you can troubleshoot your connections.

Q: 6. can i use this to power blackmagic micro cinema camera?

A: Since I didn't try it by myself, I can't say yes, for sure. But, regarding the spec., it should work without any problems.

Q: 7. how long is the cable?

A: The cable is five feet long.

Q: 8. Is this cable compatible with the Coolpix P500?

A: Yes it is, this cable is compatible with a Nikon Coolpix P500.

Q: 9. I don't see it in the Body List, but does is the UC-E6 for the D5300 also?

A: Yes, the UC-E6 is compatible with the Nikon D5300.

Q: 10. Will this device work with any charger or battery source that supports the USB-C power delivery specification? Such as an Anker Power Port III charger or an Anker Power Core III power bank.

A: The ZILR USB Type-C to Canon LP-E6 Dummy Battery Cable is designed to work with Zilr batteries https://bhpho.to/3mLbyby However the Anker Power Core III Power Bank ( battery) would also be supported.