The light beige Countryman E6 Omnidirectional Earset Mic for WisyCom Transmittersis a vocal microphone with an adjustable boom that weighs less than one tenth of an ounce and is designed to be used by only one person. Once adjusted, it will continually hold this shape.

The E6 earset can be used on either ear for capturing audio and rejecting unwanted sound, feedback, or surrounding noise from stage monitors or nearby speakers in houses of worship, theater, and outdoor vocal and speech applications.

The low-profile, omnidirectional E6 earset virtually disappears against the skin, so performers will forget they're wearing a mic. This version offers the lowest gain for the most powerful vocals that require the highest overload. In addition, the earset comes with three protective caps with different high-frequency response characteristics that control the amount of crispness or sibilance (response at 15 kHz). This omnidirectional E6 earset's cable terminates to a LEMO 3-pin connector for direct connection to WisyCom MTP30, MTP40, MTP40S, MTP41, and MTP41S wireless bodypack transmitters.

For Stage, Theater, and Broadcast TV    Fits WisyCom Transmitters    Headroom for Strong Vocals    Detachable 2mm Diameter Cable    Stiff, Steel Boom    Includes Windscreen    3 x Protective Caps    Black and White Single Tie Cable Clips    Carrying Case

The Countryman earsets are very small, lightweight, and the least visible headworn microphones.

The classic E6 is a good choice when one person will wear the microphone. Because the boom is stiffer, it can be adjusted to fit, then stored away and quickly reworn.

The E6's stainless steel boom is tough and can be bent and re-bent to fit different performers. It is highly resistant to makeup, sweat, and moisture when used with the supplied protective caps. The earset should always have a protective cap in place to keep sweat, makeup, and other foreign material out of the microphone.

The E6 earset's flexible boom is easily shaped right on the performer's face. Changeable protective caps let you shape the frequency response for different situations or to match other microphones. This omnidirectional version includes three protective caps—+4 dB (bright), +8 dB (very bright) and +0 dB (flat)—that controls the amount of crispness or sibilance (response at 15 kHz.)

Easy adjustment keeps the mic in a comfortable position for rejecting unwanted sounds. The omnidirectional E6 earset provides more isolation and is suitable for situations where there are loud monitors, extreme feedback, or environmental noise.

The included removable, quick-swap cable detaches from the actual earset, making it completely replaceable in the event of a short or break. The replaceable cable design makes upgrading wireless microphone systems easy as they are available in a wide selection of connections to accommodate most wireless transmitters.

Related Questions and Answers

Q: 1. Does this work with Sennheiser lavs?

A: Yes, the Rode Lavalier II Omnidirectional Lavalier Microphone (Black) has a "Sennheiser" type 3.5mm wiring configuration and will work with Sennheiser wireless transmitters with 3.5mm input connections.

Q: 2. Sound-wise would this be as good as a 77B? That is, if I don't need the smaller profile of the 77B would this 44B sound as good?

A: The main difference between the ECM 77B and 44B other than physical size, would be the frequency response. The 77B extends lower than the 44B, however generally for speech and broadcast applications those would be rolled off. If size is of no importance, the ECM 44B is a fine choice and very popular in broadcast applications.

Q: 3. Dumb question, would this work if I plugged this into an average aux port?

A: Whether you are referencing an Aux In port or an Aux Out port it will not work because mic signal is much lowerl than line level signal like from a headphone output for example. Because of that, the ESM-1-MN would only be compatible with a microphone input.

Q: 4. Will this microphone work with the Sony UTX-B03 Bodypack Transmitter?

A: This mic is compatible withe SONY UTX-B03 Bodypack Transmitter. It offers a compatible connector and wiring.

Q: 5. Connecting with the Kopul Low to High Impedance Transformer should the camera use the 3.5mm LINE or 3.5mm MIC setting?

A: When connecting the Sony ECM-44B Omnidirectional Lavalier Microphone to a 3.5mm input on a camera using the Kopul LMT100 Low to High Impedance Matching Transformer (B&H # KOLMT100), set the camera's input level on the mic level setting.

Q: 6. Would the 44-b use the XLR-Line or the XLR-Mic audio setting on the camera?

A: The ECM-44B is a microphone, so it outputs mic-level voltage. You would want to use the mic level setting on your camera or recording device.

Q: 7. What extension would I use to get more length to a DSLR?

A: We recommend BH #ROVC1 Rode VC1 3.5mm TRS Microphone Extension Cable for Cameras (10') for extending the length of the Rode Lavalier II Omnidirectional Lavalier Microphone: https://bhpho.to/3rvCsWB

Q: 8. is there a difference between the ECM-44 or the ECM-44b?

A: The Sony ECM 44 is a series of microphones supplied with different connectors depending on application. The ECM44-B is supplied with a AA battery power supply with an XLR connector permanently attached.

Q: 9. Will this microphone work with a gopro and an adapter?

A: The Sony ECM-44BMP features a locking connector specifically designed for use with Sony wireless transmitters. Currently no adapter available which allows for connection to a camera or recorder. Sony does however offer the ECM-44B which is a battery powered unit that can be adapted to use with Go Pro cameras when using the proper adapters.

Q: 10. How long is the actual cord?

A: 10 feet